Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
-
404 HP
-
Note (1)
-
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
-
Note (2)
-
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
Note (3)
-
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
-
1636 lb/ft
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
-
1620 lb/ft
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
-
1515 lb/ft
-
Engine Power @ 1,700 rpm – ISO 14396:2002
-
432 HP
-
Gross Power @ 1,700 rpm – SAE J1995:2014
-
436 HP
-
Operating Specifications
Operating Weight
116858 lb
-
-
Rated Payload - Quarry Face
12.5 ton (US)
-
-
Bucket Capacity Range
6.4-7.6 m3 (8.3-10 yd3)
-
-
Cat Truck Match - High Lift
772/773/775
-
-
Breakout Force
-
59060 lbf
-
Note (1)
-
For a machine configuration as defined under �Weight.�
-
Note (2)
-
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
-
22418 kg
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
-
46526 lb
-
Transmission
Transmission Type
Cat planetary power shift
-
-
Forward - 1
5 mile/h
3.9 mile/h
-
Forward - 2
8 mile/h
7.4 mile/h
-
Reverse - 1
5 mile/h
4.3 mile/h
-
Reverse - 2
8 mile/h
8.5 mile/h
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8 mile/h
-
-
Direct Drive - Forward 3
14 mile/h
-
-
Direct Drive - Forward 4
24 mile/h
-
-
Direct Drive - Reverse 1
Lock-up disabled
-
-
Direct Drive - Reverse 2
9 mile/h
-
-
Direct Drive - Reverse 3
16 mile/h
-
-
Direct Drive - Reverse 4
25.4 mile/h
-
-
Forward - 3
-
13.1 mile/h
-
Forward - 4
-
23.3 mile/h
-
Note
-
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
-
Reverse - 3
-
15 mile/h
-
Reverse - 4
-
24.5 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
EH - Load Sense
-
-
Lift/Tilt System
2X x 145 cc Variable displacement piston
-
-
Maximum Flow at 2,165 rpm
159 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4598 psi
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
190 mm x 1216 mm (7.5 in x 48 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
170 mm x 722 mm (6.7 in x 28.4 in)
-
-
Pilot System
Variable displacement piston
-
-
Tilt Cylinder - Stroke
27 in
-
-
Hydraulic Cycle Times
Rack Back
3.8 s
-
-
Raise
7.5 s
-
-
Dump
3 s
-
-
Lower Float Down
4.6 s
-
-
Total Hydraulic Cycle Time - Empty Bucket
18.9 s
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
-
-
Steering System - Pump
Piston, variable displacement
-
-
Maximum Flow
52 gal (US)
-
-
Relief Valve Setting - Steering
4000 psi
-
-
Total Steering Angle
70°
-
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
5.2 s
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
-
Axles
Front
Fixed
-
-
Rear
Trunnion
-
-
Oscillation Angle
+/-12.5°
-
-
Brakes
Brakes
ISO 3450:2011
-
-
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
-
Service Refill Capacities
Fuel Tank
141 gal (US)
112.5 gal (US)
-
Cooling System
27 gal (US)
13.7 gal (US)
-
Engine Crankcase
9 gal (US)
-
-
Diesel Exhaust Fluid Tank
5.5 gal (US)
-
-
Transmission
20 gal (US)
20.3 gal (US)
-
Differential - Final Drives - Front
49 gal (US)
24.3 gal (US)
-
Differential - Final Drives - Rear
45 gal (US)
24.3 gal (US)
-
Note
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
-
-
Crankcase
-
9.8 gal (US)
-
DEF Tank
-
5.5 gal (US)
-
Hydraulic Tank
-
40.4 gal (US)
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
72 dB(A)
-
-
Machine Sound Level (ISO 6395)
110 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
13.5 ft
-
-
Ground to Top of Exhaust Stacks
13.3 ft
-
-
Ground to Top of Hood
10.7 ft
-
-
Rear Axle - Centerline to Bumper
10.3 ft
-
-
Front Axle Centerline to Bucket Tip
15.7 ft
-
-
Wheel Base
12.5 ft
-
-
Maximum Overall Length
39.5 ft
-
-
Ground to Lower Hitch Clearance
1.5 ft
-
-
Clearance at Maximum Lift
12 ft
-
-
B-Pin Height - Maximum Lift
18.7 ft
-
-
Maximum Overall Height - Bucket Raised
25 ft
-
-
Reach - Maximum Lift
7.7 ft
-
-
Note
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
-
-
Buckets
Bucket Capacities
6.4-7.6 m3 (8.3-10 yd3)
-
-
Sustainability
Recyclability
96%
-
-
Weights
Operating Weight
-
78264 lb
-
Note
-
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
Bucket Capacities
Bucket Range
-
4.8-17.2 m³ 6.25-22.5 yd³
-
Sound
Note (1)
-
** For machines in European Union countries and in countries that adopt the �EU Directives.�
-
Note (2)
-
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
-
109
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
-
112 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
-
78
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
Hydraulic System
Implement System - Maximum Operating Pressure
-
4975 psi
-
Implement System - Maximum Pump Output at 2,250 rpm
-
119 gal/min
-
Dimensions
Note
-
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
