Compare

Compare Equipment Go Back

Operating Specifications
	988 GC Wheel Loader View Product	995 Wheel Loader View Product Remove	986 Wheel Loader View Product Remove	920 Compact Wheel Loader View Product Remove	990 Wheel Loader View Product Remove
Operating Weight	112426 lb	-	-	-	-
Bucket Capacity Range	6.4-7.6 m3 (8.3-10 yd3)	17.2-43.6 m3 (22.3-57 yd3)	5.0-10.3 m³ (6.5-13.5 yd³)	-	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
Rated Payload - Quarry Face	12.5 ton (US)	-	-	-	-
Cat Truck Match - High Lift	772/773/775	789/793/794	772/773	-	775-777
Operating Weight - Standard	-	543772 lb	97785 lb	-	178517 lb
Operating Weight - High Lift	-	547675 lb	104005 lb	-	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	60 ton (US)	-	-	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	55 ton (US)	-	-	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-	-
Note	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-	-	-
Cat Truck Match - Standard	-	785/789	770/735/740/745	-	773-775
Rated Payload - Standard (Quarry Face)	-	-	11 ton (US)	-	-
Rated Payload - Loose Material (Standard)	-	-	14 ton (US)	-	-
Rated Payload - High Lift (Quarry Face)	-	-	11 ton (US)	-	-
Rated Payload - Loose Material (High Lift)	-	-	12.1 ton (US)	-	-
Rated Payload - Standard	-	-	-	-	17.5 ton (US)
Rated Payload - High Lift	-	-	-	-	17.5 ton (US)
Engine
Engine Model	Cat® C15	Cat® 3516E	Cat® C15	Cat C3.6	Cat® C27
Rated Speed	2000 rpm	-	2000	-	1800 r/min
Peak Power Speed	1600 rpm	-	1600	-	-
Gross Power - SAE J1995:2014	456 hp	1870 hp	456 hp	-	766 hp
Net Power - SAE J1349:2011	448 hp	-	373 hp	-	-
Bore	5.4 in	6.7 in	5.4 in	3.85 in	5.4 in
Stroke	6.75 in	8.5 in	6.75 in	4.72 in	6 in
Displacement	927 in³	4766 in³	927 in²	220 in³	1649.5 in³
Peak Torque (1,200 rpm) - SAE J1995:2014	1778 lbf·ft	-	1778 lb/ft	-	-
Torque Rise	16%	39%	16%	-	18 %
Note (1)	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	The power ratings apply when tested under the reference conditions for the specified standard.	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.	-	-
Note (2)	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	-
Note (3)	Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.	The gross power advertised is with the fan at maximum speed.	-	-	-
Emissions	-	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	-	Engine meets Tier 4 Final/Stage V emission standards.	Option 2 - Emits equivalent to U.S. EPA Tier 2
Engine Power - ISO 14396	-	1847 hp	-	-	-
Net Power - SAE J1349 - Standard Ambient	-	1739 hp	-	-	-
Net Power - SAE J1349 - High Ambient	-	1696 hp	-	-	-
Peak Torque - 1,200 rpm - SAE J1995	-	8549 lb/ft	-	-	-
Engine Power - ISO 14396:2002	-	-	449 hp	-	752 hp
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	373 hp	-	-
Rated Speed - 2,000 rpm - ISO 9249	-	-	373 hp	-	-
Maximum Gross Power	-	-	-	121 hp	-
Rated Net Power - Rated Engine Speed	-	-	-	2200 r/min	-
Maximum Gross Power - Rated Engine Speed	-	-	-	2200 r/min	-
Rated Net Power - SAE J1349	-	-	-	120 hp	-
Maximum Gross Power - ISO 14396 (metric)	-	-	-	122 hp	-
Rated Net Power - ISO 9249	-	-	-	118 hp	-
Maximum Gross Torque - SAE J1995	-	-	-	372 ft·lbf	-
Maximum Gross Torque - ISO 14396	-	-	-	369 ft·lbf	-
Maximum Net Torque - SAE J1349	-	-	-	366 ft·lbf	-
Maximum Net Torque - ISO 9249	-	-	-	363 ft·lbf	-
Note	-	-	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
Maximum Gross Power - ISO 14396	-	-	-	121 hp	-
Net Power - SAE J1349:2011 - Standard Ambient	-	-	-	-	699 hp
Net Power - SAE J1349:2011 - High Ambient	-	-	-	-	648 hp
Peak Torque - 1,200 rpm	-	-	-	-	2624 lb/ft
Transmission
Transmission Type	Cat planetary power shift	Cat Planetary Power Shift	Cat planetary power shift	-	Cat planetary power shift
Forward - 1	5 mile/h	4.6 mile/h	5 mile/h	-	4.6 mile/h
Forward - 2	8 mile/h	8 mile/h	8 mile/h	-	8.2 mile/h
Reverse - 1	5 mile/h	5 mile/h	5 mile/h	-	5.1 mile/h
Reverse - 2	8 mile/h	8.8 mile/h	8 mile/h	-	9.1 mile/h
Direct Drive - Forward 1	Lock-up disabled	Lock-up disables	-	-	Lock-up disabled
Direct Drive - Forward 2	8 mile/h	8.7 mile/h	8 mile/h	-	8.2 mile/h
Direct Drive - Forward 3	14 mile/h	15.2 mile/h	14 mile/h	-	14.5 mile/h
Direct Drive - Forward 4	24 mile/h	-	24 mile/h	-	-
Direct Drive - Reverse 1	Lock-up disabled	Lock-up disables	-	-	5.1 mile/h
Direct Drive - Reverse 2	9 mile/h	9.6 mile/h	9 mile/h	-	9.1 mile/h
Direct Drive - Reverse 3	16 mile/h	16.8 mile/h	16 mile/h	-	16 mile/h
Direct Drive - Reverse 4	25.4 mile/h	-	25.4 mile/h	-	-
Note	Travel speeds based on 35/65-R33 tires.	Travel speeds based on 58/85-57 tires.	-	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Forward - 3	-	13.6 mile/h	-	-	14.5 mile/h
Reverse - 3	-	14.9 mile/h	-	-	16 mile/h
Forward and Reverse - Speed Range 3	-	-	-	25 mile/h	-
Forward and Reverse - Speed Range 2*	-	-	-	12.5 mile/h	-
Forward and Reverse - Speed Range 1*	-	-	-	6.3 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	EH - Load Sense	Positive Flow Control	Load Sense	-	Positive flow control
Lift/Tilt System - Pump	Variable displacement piston	Variable Displacement Piston	2 × 110 cc variable displacement	-	-
Maximum Flow at 2,165 rpm	159 gpm	-	123 gpm	-	-
Relief Valve Setting - Lift/Tilt	4598 psi	5004 psi	4050 psi	-	4786 psi
Cylinders, Double Acting - Lift, Bore and Stroke	190 mm x 1216 mm (7.5 in x 48 in)	370 × 1713 mm (14.6 × 67.4 in)	-	-	235 mm × 1287 mm (9.3 in × 50.7 in)
Cylinders, Double Acting - Tilt, Bore and Stroke	170 mm x 722 mm (6.7 in x 28.4 in)	310 × 1086 mm (12.2 × 42.8 in)	-	-	292.1 mm × 820 mm (11.5 in × 32.3 in)
Pilot System	Variable displacement piston	Open Loop and Pressure Reducing	-	-	Open loop and pressure reducing
Relief Valve Setting	500 psi	-	-	-	-
Maximum Flow at 1,700 rpm Engine Speed	-	541 gpm	-	-	-
Lift Cylinder - Bore	-	-	7.5 in	-	-
Lift Cylinder - Stroke	-	-	45 in	-	-
Tilt Cylinder - Bore	-	-	6.7 in	-	-
Tilt Cylinder - Stroke	-	-	28.4 in	-	-
Lift/Tilt System	-	-	-	-	Variable displacement piston
Maximum Flow at 1,800 rpm	-	-	-	-	240 gpm
Pilot Relief Setting	-	-	-	-	507 psi
Hydraulic Cycle Times
Rack Back	3.8 s	4.9 s	4.5 s	-	4.3 s
Raise	7.5 s	12.6 s	9 s	-	8.6 s
Dump	3 s	3.1 s	3.5 s	-	2.9 s
Lower Float Down	4.6 s	4.2 s	4.3 s	-	3.7 s
Total Hydraulic Cycle Time - Empty Bucket	18.9 s	-	-	-	13.8 s
Lower	-	-	5.2 s	-	3.7 s
Total Hydraulic Cycle Time	-	-	21.3 s	-	-
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	Load Sense	-	Pilot, load sensing
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	Piston, variable displacement	-	Piston, variable displacement
Maximum Flow at 2,165 rpm	52 gpm	-	-	-	-
Relief Valve Setting - Steering	4000 psi	-	-	-	5004 psi
Total Steering Angle	70°	80 degrees	70°	-	70°
Steering Cycle Times - High Idle	3 s	4.3 s	-	-	-
Steering Cycle Times - Low Idle	5.2 s	7.6 s	-	-	-
Maximum Flow at 1,400 rpm	-	-	52 gpm	-	96.2 gpm
Steering Cut Off Pressure	-	-	4000 psi	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co	-	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c
Axles
Front	Fixed	Fixed	Fixed	Fixed; Locking differential (standard)	Fixed
Rear	Trunnion	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (standard)	Trunnion
Oscillation Angle	+/-12.5°	9°	±12.5°	-	8.5°
Oscillation Angle - Chain Arrangement	-	-	±8.5°	-	-
Brakes
Brakes	ISO 3450:2011	ISO 3450:2011	ISO 3450:2011	-	ISO 3450: 2011
Operator's Cab
ROPS/FOPS	Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)	-	-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	73 dB(A)	-	73 dB(A)	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	113 dB(A)	-	116 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	72 dB(A)	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	*Sound suppression equipped
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	-	114 dB(A)
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	74 dB(A)	-	74 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)	113 dB(A)	-	113 dB(A)	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	73 dB(A)	-	73 dB(A)	-	-
Machine Sound Power Level (ISO 6395:2008)**	110 dB(A)	-	110 dB(A)	-	-
Note (1)	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	-
Note (2)	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	-
Note (3)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (4)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	-
Note (5)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-
Service Refill Capacities
Fuel Tank	141 gal (US)	-	141 gal (US)	43.6 gal (US)	281 gal (US)
Cooling System	27 gal (US)	-	-	5.7 gal (US)	54.9 gal (US)
Engine Crankcase	9 gal (US)	-	-	2.6 gal (US)	20 gal (US)
Diesel Exhaust Fluid Tank	5.5 gal (US)	-	6 gal (US)	-	-
Transmission	20 gal (US)	-	20 gal (US)	0.8 gal (US)	29.1 gal (US)
Differential - Final Drives - Front	49 gal (US)	-	-	-	71.6 gal (US)
Differential - Final Drives - Rear	45 gal (US)	-	-	-	68.9 gal (US)
Hydraulic System Factory Fill	94 gal (US)	-	87 gal (US)	-	210 gal (US)
Note	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester) * - 10	-	-	DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
Fuel Tank - Short Lift	-	-	127 gal (US)	-	-
Cooling Systems	-	-	26 gal (US)	-	-
Crankcase	-	-	9 gal (US)	-	-
Axle Oil - Differentials and Final Drives - Front	-	-	49 gal (US)	-	-
Axle Oil - Differentials and Final Drives - Rear	-	-	45 gal (US)	-	-
Hydraulic System - Tank Only	-	-	34 gal (US)	-	-
Axles - Rear	-	-	-	4.5 gal (US)	-
Hydraulic System - Including Tank	-	-	-	25.9 gal (US)	-
Hydraulic Tank	-	-	-	14.5 gal (US)	-
Diesel Exhaust Fluid (DEF) Tank	-	-	-	4.8 gal (US)	-
Axles - Front	-	-	-	4.5 gal (US)	-
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	-	68.9 gal (US)
Hydraulic Tank - Steering and Braking	-	-	-	-	34.9 gal (US)
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	13.5 ft	-	-	-	-
Ground to Top of Exhaust Stacks	13.3 ft	-	-	-	-
Ground to Top of Hood	10.7 ft	-	-	-	-
Ground to Fuel Tank Clearance	2.2 ft	-	-	-	-
Rear Axle - Centerline to Bumper	10.3 ft	-	-	-	-
Front Axle Centerline to Bucket Tip	16.7 ft	-	-	-	-
Wheel Base	12.5 ft	-	-	-	-
Maximum Overall Length	39.5 ft	-	-	-	-
Ground to Lower Hitch Clearance	1.5 ft	-	-	-	-
Ground to Center of Front Axle	3.2 ft	-	-	-	-
Clearance at Maximum Lift (45° Dump)	12 ft	-	-	-	-
B-Pin Height - Maximum Lift	18.7 ft	-	-	-	-
Maximum Overall Height - Bucket Raised	25 ft	-	-	-	-
Reach at Maximum Lift (45° Dump)	7.7 ft	-	-	-	-
Note	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	-	-	-	-
Complete System Fill
Fuel Tank - Standard	-	856 gal (US)	-	-	-
Fuel Tank - With 24 hr Attachment	-	1414 gal (US)	-	-	-
Cooling System	-	138 gal (US)	-	-	-
Engine Crankcase	-	76 gal (US)	-	-	-
Transmission	-	110 gal (US)	-	-	-
Differential - Final Drives - Front	-	220 gal (US)	-	-	-
Differential - Final Drives - Rear	-	200 gal (US)	-	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	270 gal (US)	-	-	-
Hydraulic Tank - Steering and Braking	-	100 gal (US)	-	-	-
Oil Renewal System (ORS)*	-	20 gal (US)	-	-	-
Note	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-	-	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	131 °F	-	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	127.4 °F	-	-	-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	74 dB(A)	-	-	-
Machine Sound Level (ISO 6395:2008)	-	119 dB(A)	-	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	-	-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	73 dB(A)	-	-	-
Machine Sound Level (ISO 6395:2008)	-	117 dB(A)	-	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	-	-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	28.8 ft	-	-	-
Clearance at Maximum Lift	-	19.8 ft	-	-	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-	-	-
Front Axle Centerline to Bucket Tip	-	21.9 ft	-	-	-
Ground to Bumper Clearance	-	4.4 ft	-	-	-
Ground to Center of Axles	-	6 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	-	-	-
Ground to Top of Exhaust Stacks	-	23.2 ft	-	-	-
Ground to Top of Hood	-	18.6 ft	-	-	-
Ground to Top of ROPS	-	23.4 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	39.3 ft	-	-	-
Maximum Overall Length	-	64.6 ft	-	-	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-	-
Rack Angle at Maximum Lift	-	59.5 degrees	-	-	-
Rack Back Angle - Carry	-	47.7 degrees	-	-	-
Rack Back Angle - Ground Level	-	39.7 degrees	-	-	-
Reach - Maximum Lift	-	9.6 ft	-	-	-
Rear Axle - Centerline to Bumper	-	20.4 ft	-	-	-
Tread Width	-	14.1 ft	-	-	-
Wheel Base	-	22.3 ft	-	-	-
Width - Over Tires - With Bulge	-	18.8 ft	-	-	-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	31.6 ft	-	-	-
Clearance at Maximum Lift	-	22.6 ft	-	-	-
Dump Angle at Maximum Lift	-	–50.0 degrees	-	-	-
Front Axle Centerline to Bucket Tip	-	24.2 ft	-	-	-
Ground to Bumper Clearance	-	4.4 ft	-	-	-
Ground to Center of Axles	-	6 ft	-	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	-	-	-
Ground to Top of Exhaust Stacks	-	23.2 ft	-	-	-
Ground to Top of Hood	-	18.6 ft	-	-	-
Ground to Top of ROPS	-	23.4 ft	-	-	-
Maximum Overall Height - Bucket Raised	-	42.1 ft	-	-	-
Maximum Overall Length	-	66.9 ft	-	-	-
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-	-
Rack Angle at Maximum Lift	-	59.4 degrees	-	-	-
Rack Back Angle - Carry	-	53.5 degrees	-	-	-
Rack Back Angle - Ground Level	-	45 degrees	-	-	-
Reach - Maximum Lift	-	9.4 ft	-	-	-
Rear Axle - Centerline to Bumper	-	20.4 ft	-	-	-
Tread Width	-	14.1 ft	-	-	-
Wheel Base	-	22.3 ft	-	-	-
Width - Over Tires - With Bulge	-	18.8 ft	-	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	-	13.5 ft	-	17.2 ft
Ground to Top of Exhaust Stacks	-	-	13.3 ft	-	16.6 ft
Ground to Top of Hood	-	-	10.7 ft	-	12.7 ft
Ground to Center of Front Axle	-	-	3.2 ft	-	4.2 ft
Ground to Fuel Tank Clearance	-	-	2.3 ft	-	-
Ground to Lower Hitch Clearance	-	-	1.5 ft	-	2 ft
Reach - Maximum Lift	-	-	7.1 ft	-	7.2 ft
Clearance at Maximum Lift	-	-	10.1 ft	-	7.2 ft
B-Pin Height - Maximum Lift	-	-	16.1 ft	-	19.7 ft
Maximum Overall Height - Bucket Raised	-	-	22.4 ft	-	27.2 ft
Rear Axle - Centerline to Bumper	-	-	10.3 ft	-	12.5 ft
Wheel Base	-	-	12.5 ft	-	15.1 ft
Maximum Overall Length	-	-	36.6 ft	-	42.9 ft
Front Axle Centerline to Bucket Tip	-	-	13.8 ft	-	15.4 ft
Note	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
Ground to Bumper Clearance	-	-	-	-	3.5 ft
Rack Back Angle at Ground Level	-	-	-	-	40.4°
Rack Back Angle at Carry	-	-	-	-	48.8°
Rack Angle at Maximum Lift	-	-	-	-	63.7°
Dump Angle at Maximum Lift	-	-	-	-	45°
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	-	13.5 ft	-	17.2 ft
Ground to Top of Exhaust Stacks	-	-	13.3 ft	-	16.6 ft
Ground to Top of Hood	-	-	10.7 ft	-	12.7 ft
Ground to Center of Front Axle	-	-	3.2 ft	-	4.2 ft
Ground to Fuel Tank Clearance	-	-	2.3 ft	-	-
Ground to Lower Hitch Clearance	-	-	1.5 ft	-	2 ft
Reach - Maximum Lift	-	-	7.4 ft	-	8.5 ft
Clearance at Maximum Lift	-	-	11.6 ft	-	14.8 ft
B-Pin Height - Maximum Lift	-	-	17.6 ft	-	21.2 ft
Maximum Overall Height - Bucket Raised	-	-	23.9 ft	-	28.7 ft
Rear Axle - Centerline to Bumper	-	-	10.3 ft	-	12.5 ft
Wheel Base	-	-	12.5 ft	-	15.1 ft
Maximum Overall Length	-	-	38 ft	-	45.3 ft
Front Axle Centerline to Bucket Tip	-	-	15.3 ft	-	17.8 ft
Note	-	-	All dimensions are approximate. Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.	-	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
Ground to Bumper Clearance	-	-	-	-	3.5 ft
Rack Back Angle at Ground Level	-	-	-	-	39.9°
Rack Back Angle at Carry	-	-	-	-	49.3°
Rack Angle at Maximum Lift	-	-	-	-	60.6°
Dump Angle at Maximum Lift	-	-	-	-	51°
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	13.5 ft	-	-
Ground to Top of Exhaust Stacks	-	-	13.3 ft	-	-
Ground to Top of Hood	-	-	10.7 ft	-	-
Ground to Center of Rear Axle	-	-	3.2 ft	-	-
Ground to Fuel Tank Clearance	-	-	2.3 ft	-	-
Ground to Lower Hitch Clearance	-	-	1.5 ft	-	-
Reach at Maximum Lift	-	-	8 ft	-	-
Clearance at Maximum Lift	-	-	10.7 ft	-	-
B-Pin Height at Maximum Lift	-	-	15 ft	-	-
Maximum Overall Height, Bucket Raised	-	-	20.9 ft	-	-
Rear Axle Center Line to Bumper	-	-	10.3 ft	-	-
Wheel Base	-	-	12.5 ft	-	-
Maximum Overall Length	-	-	35 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	12.2 ft	-	-
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	13.5 ft	-	-
Ground to Top of Exhaust Stacks	-	-	13.3 ft	-	-
Ground to Top of Hood	-	-	10.7 ft	-	-
Ground to Center of Rear Axle	-	-	3.2 ft	-	-
Ground to Fuel Tank Clearance	-	-	2.3 ft	-	-
Ground to Lower Hitch Clearance	-	-	1.5 ft	-	-
B-Pin Height at Maximum Lift	-	-	15 ft	-	-
Rear Axle Center Line to Bumper	-	-	10.3 ft	-	-
Wheel Base	-	-	12.5 ft	-	-
Maximum Overall Length	-	-	35.4 ft	-	-
Front Axle Centerline to Bucket Tip	-	-	12.6 ft	-	-
Weights
Operating Weight	-	-	-	21742 lb	-
Buckets
Bucket Capacities	-	-	-	1.3-3.5 m3 (1.7-4.6 yd3)	-
Bucket Capacities - General Purpose	-	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-
Bucket Capacities - Light Material	-	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-
Sustainability
Recyclability	-	-	-	95%	-
Cab
ROPS	-	-	-	ISO 3471:2008	-
FOPS	-	-	-	ISO 3449:2005	-
Note (3)	-	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-
Note (2)	-	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-
Note (1)	-	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-
Note (4)	-	-	-	*The measurements were conducted with the cab doors and windows closed.	-
Loader Hydraulic System
Maximum Flow - Implement Pump	-	-	-	43.6 gpm	-
Relief Pressure - Tilt Cylinder	-	-	-	4641 psi	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard	-	-	-	25 gpm	-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure	-	-	-	4641 psi	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	-	2.7 s	-
Note	-	-	-	All cycle times listed are with cylinder snubbing turned off.	-
Maximum Working Pressure - Implement Pump	-	-	-	4061 psi	-
Hydraulic Cycle Time - Total Cycle Time	-	-	-	11.5 s	-
Hydraulic Cycle Time - Rackback	-	-	-	2.2 s	-
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	-	1.8 s	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	-	4.8 s	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High	-	-	-	40 gpm	-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow	-	-	-	25 gpm	-
Steering
Maximum Working Pressure - Steering Pump	-	-	-	3190 psi	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	-	2.3 s	-
Steering Articulation Angle - Each Direction	-	-	-	40 °	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	-	3.4 turns	-
Maximum Flow - Steering Pump	-	-	-	21.7 gpm	-
Tires
Other Choices Include	-	-	-	17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid	-
Standard Size	-	-	-	17.5 R25 L2 XTLA	-
Note (1)	-	-	-	Other tire choices are available. Contact your Cat dealer for details.	-
Note (3)	-	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-
Note (2)	-	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	-	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	-	-	-	116 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	-	-	-	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*	-	-	-	-	114 dB(A)
Note (1)	-	-	-	-	*Sound suppression equipped
Note (2)	-	-	-	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)	-	-	-	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)	-	-	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Compare Equipment Go Back

988 GC Wheel Loader

995 Wheel Loader

986 Wheel Loader

920 Compact Wheel Loader

990 Wheel Loader

Operating Specifications

Engine

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Operator's Cab

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 3 / Stage IIIA

Service Refill Capacities

Dimensions (Approximate) - High Lift

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Weights

Buckets

Sustainability

Cab

Loader Hydraulic System

Steering

Tires

Sound Performance - Tier 2