CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    988 GC Wheel Loader
    View Product
    995 Wheel Loader
    View Product Remove
    986 Wheel Loader
    View Product Remove
    920 Compact Wheel Loader
    View Product Remove

    Operating Specifications
    Operating Weight 112426 lb - - -
    Bucket Capacity Range 6.4-7.6 m3 (8.3-10 yd3) 17.2-43.6 m3 (22.3-57 yd3) 5.0-10.3 m³ (6.5-13.5 yd³) -
    Rated Payload - Quarry Face 12.5 ton (US) - - -
    Cat Truck Match - High Lift 772/773/775 789/793/794 772/773 -
    Operating Weight - Standard - 543772 lb 97785 lb -
    Operating Weight - High Lift - 547675 lb 104005 lb -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - 60 ton (US) - -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - 50 ton (US) - -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - 55 ton (US) - -
    Rated Payload - High Lift (Moderate to High Digging Resistance) - 50 ton (US) - -
    Note - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
    Cat Truck Match - Standard - 785/789 770/735/740/745 -
    Rated Payload - Standard (Quarry Face) - - 11 ton (US) -
    Rated Payload - Loose Material (Standard) - - 14 ton (US) -
    Rated Payload - High Lift (Quarry Face) - - 11 ton (US) -
    Rated Payload - Loose Material (High Lift) - - 12.1 ton (US) -

    Engine
    Engine Model Cat® C15 Cat® 3516E Cat® C15 Cat C3.6
    Rated Speed 2000 rpm - 2000 -
    Peak Power Speed 1600 rpm - 1600 -
    Gross Power - SAE J1995:2014 456 hp 1870 hp 456 hp -
    Net Power - SAE J1349:2011 448 hp - 373 hp -
    Bore 5.4 in 6.7 in 5.4 in 3.85 in
    Stroke 6.75 in 8.5 in 6.75 in 4.72 in
    Displacement 927 in³ 4766 in³ 927 in² 220 in³
    Peak Torque (1,200 rpm) - SAE J1995:2014 1778 lbf·ft - 1778 lb/ft -
    Torque Rise 16% 39% 16% -
    Note (1) Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. The power ratings apply when tested under the reference conditions for the specified standard. Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. -
    Note (2) Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. -
    Note (3) Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions. The gross power advertised is with the fan at maximum speed. - -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent - Engine meets Tier 4 Final/Stage V emission standards.
    Engine Power - ISO 14396 - 1847 hp - -
    Net Power - SAE J1349 - Standard Ambient - 1739 hp - -
    Net Power - SAE J1349 - High Ambient - 1696 hp - -
    Peak Torque - 1,200 rpm - SAE J1995 - 8549 lb/ft - -
    Engine Power - ISO 14396:2002 - - 449 hp -
    Rated Speed - 2,000 rpm - EEC 80/1269 - - 373 hp -
    Rated Speed - 2,000 rpm - ISO 9249 - - 373 hp -
    Maximum Gross Power - - - 121 hp
    Rated Net Power - Rated Engine Speed - - - 2200 r/min
    Maximum Gross Power - Rated Engine Speed - - - 2200 r/min
    Rated Net Power - SAE J1349 - - - 120 hp
    Maximum Gross Power - ISO 14396 (metric) - - - 122 hp
    Rated Net Power - ISO 9249 - - - 118 hp
    Maximum Gross Torque - SAE J1995 - - - 372 ft·lbf
    Maximum Gross Torque - ISO 14396 - - - 369 ft·lbf
    Maximum Net Torque - SAE J1349 - - - 366 ft·lbf
    Maximum Net Torque - ISO 9249 - - - 363 ft·lbf
    Note - - - Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
    Maximum Gross Power - ISO 14396 - - - 121 hp

    Transmission
    Transmission Type Cat planetary power shift Cat Planetary Power Shift Cat planetary power shift -
    Forward - 1 5 mile/h 4.6 mile/h 5 mile/h -
    Forward - 2 8 mile/h 8 mile/h 8 mile/h -
    Reverse - 1 5 mile/h 5 mile/h 5 mile/h -
    Reverse - 2 8 mile/h 8.8 mile/h 8 mile/h -
    Direct Drive - Forward 1 Lock-up disabled Lock-up disables - -
    Direct Drive - Forward 2 8 mile/h 8.7 mile/h 8 mile/h -
    Direct Drive - Forward 3 14 mile/h 15.2 mile/h 14 mile/h -
    Direct Drive - Forward 4 24 mile/h - 24 mile/h -
    Direct Drive - Reverse 1 Lock-up disabled Lock-up disables - -
    Direct Drive - Reverse 2 9 mile/h 9.6 mile/h 9 mile/h -
    Direct Drive - Reverse 3 16 mile/h 16.8 mile/h 16 mile/h -
    Direct Drive - Reverse 4 25.4 mile/h - 25.4 mile/h -
    Note Travel speeds based on 35/65-R33 tires. Travel speeds based on 58/85-57 tires. - *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
    Forward - 3 - 13.6 mile/h - -
    Reverse - 3 - 14.9 mile/h - -
    Forward and Reverse - Speed Range 3 - - - 25 mile/h
    Forward and Reverse - Speed Range 2* - - - 12.5 mile/h
    Forward and Reverse - Speed Range 1* - - - 6.3 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit EH - Load Sense Positive Flow Control Load Sense -
    Lift/Tilt System - Pump Variable displacement piston Variable Displacement Piston 2 × 110 cc variable displacement -
    Maximum Flow at 2,165 rpm 159 gpm - 123 gpm -
    Relief Valve Setting - Lift/Tilt 4598 psi 5004 psi 4050 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke 190 mm x 1216 mm (7.5 in x 48 in) 370 × 1713 mm (14.6 × 67.4 in) - -
    Cylinders, Double Acting - Tilt, Bore and Stroke 170 mm x 722 mm (6.7 in x 28.4 in) 310 × 1086 mm (12.2 × 42.8 in) - -
    Pilot System Variable displacement piston Open Loop and Pressure Reducing - -
    Relief Valve Setting 500 psi - - -
    Maximum Flow at 1,700 rpm Engine Speed - 541 gpm - -
    Lift Cylinder - Bore - - 7.5 in -
    Lift Cylinder - Stroke - - 45 in -
    Tilt Cylinder - Bore - - 6.7 in -
    Tilt Cylinder - Stroke - - 28.4 in -

    Hydraulic Cycle Times
    Rack Back 3.8 s 4.9 s 4.5 s -
    Raise 7.5 s 12.6 s 9 s -
    Dump 3 s 3.1 s 3.5 s -
    Lower Float Down 4.6 s 4.2 s 4.3 s -
    Total Hydraulic Cycle Time - Empty Bucket 18.9 s - - -
    Lower - - 5.2 s -
    Total Hydraulic Cycle Time - - 21.3 s -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing Pilot, Load Sensing Load Sense -
    Steering System - Pump Piston, variable displacement Piston, Variable Displacement Piston, variable displacement -
    Maximum Flow at 2,165 rpm 52 gpm - - -
    Relief Valve Setting - Steering 4000 psi - - -
    Total Steering Angle 70° 80 degrees 70° -
    Steering Cycle Times - High Idle 3 s 4.3 s - -
    Steering Cycle Times - Low Idle 5.2 s 7.6 s - -
    Maximum Flow at 1,400 rpm - - 52 gpm -
    Steering Cut Off Pressure - - 4000 psi -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co -

    Axles
    Front Fixed Fixed Fixed Fixed; Locking differential (standard)
    Rear Trunnion Trunnion Trunnion Oscillating ±11 degrees; Locking differential (standard)
    Oscillation Angle +/-12.5° 9° ±12.5° -
    Oscillation Angle - Chain Arrangement - - ±8.5° -

    Brakes
    Brakes ISO 3450:2011 ISO 3450:2011 ISO 3450:2011 -

    Operator's Cab
    ROPS/FOPS Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards - ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) -

    Sound Performance - Tier 4 Final / Stage V
    Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - 113 dB(A) -
    Operator Sound Pressure Level (ISO 6396:2008)* 72 dB(A) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - 110 dB(A) -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -

    Sound Performance - Tier 3 / Stage IIIA
    Operator Sound Pressure Level (ISO 6396:2008) 74 dB(A) - 74 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) 113 dB(A) - 113 dB(A) -
    Operator Sound Pressure Level (ISO 6396:2008)* 73 dB(A) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008)** 110 dB(A) - 110 dB(A) -
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” - * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” -
    Note (2) ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. - ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. -
    Note (3) The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
    Note (4) The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. - The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
    Note (5) Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -

    Service Refill Capacities
    Fuel Tank 141 gal (US) - 141 gal (US) 43.6 gal (US)
    Cooling System 27 gal (US) - - 5.7 gal (US)
    Engine Crankcase 9 gal (US) - - 2.6 gal (US)
    Diesel Exhaust Fluid Tank 5.5 gal (US) - 6 gal (US) -
    Transmission 20 gal (US) - 20 gal (US) 0.8 gal (US)
    Differential - Final Drives - Front 49 gal (US) - - -
    Differential - Final Drives - Rear 45 gal (US) - - -
    Hydraulic System Factory Fill 94 gal (US) - 87 gal (US) -
    Note Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: - 20% biodiesel FAME (fatty acid methyl ester) *** - 10 - - DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Fuel Tank - Short Lift - - 127 gal (US) -
    Cooling Systems - - 26 gal (US) -
    Crankcase - - 9 gal (US) -
    Axle Oil - Differentials and Final Drives - Front - - 49 gal (US) -
    Axle Oil - Differentials and Final Drives - Rear - - 45 gal (US) -
    Hydraulic System - Tank Only - - 34 gal (US) -
    Axles - Rear - - - 4.5 gal (US)
    Hydraulic System - Including Tank - - - 25.9 gal (US)
    Hydraulic Tank - - - 14.5 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.8 gal (US)
    Axles - Front - - - 4.5 gal (US)

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS 13.5 ft - - -
    Ground to Top of Exhaust Stacks 13.3 ft - - -
    Ground to Top of Hood 10.7 ft - - -
    Ground to Fuel Tank Clearance 2.2 ft - - -
    Rear Axle - Centerline to Bumper 10.3 ft - - -
    Front Axle Centerline to Bucket Tip 16.7 ft - - -
    Wheel Base 12.5 ft - - -
    Maximum Overall Length 39.5 ft - - -
    Ground to Lower Hitch Clearance 1.5 ft - - -
    Ground to Center of Front Axle 3.2 ft - - -
    Clearance at Maximum Lift (45° Dump) 12 ft - - -
    B-Pin Height - Maximum Lift 18.7 ft - - -
    Maximum Overall Height - Bucket Raised 25 ft - - -
    Reach at Maximum Lift (45° Dump) 7.7 ft - - -
    Note Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. - - -

    Complete System Fill
    Fuel Tank - Standard - 856 gal (US) - -
    Fuel Tank - With 24 hr Attachment - 1414 gal (US) - -
    Cooling System - 138 gal (US) - -
    Engine Crankcase - 76 gal (US) - -
    Transmission - 110 gal (US) - -
    Differential - Final Drives - Front - 220 gal (US) - -
    Differential - Final Drives - Rear - 200 gal (US) - -
    Hydraulic Tank - Implement and Hydraulic Fan - 270 gal (US) - -
    Hydraulic Tank - Steering and Braking - 100 gal (US) - -
    Oil Renewal System (ORS)* - 20 gal (US) - -
    Note - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - 127.4 °F - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 74 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 119 dB(A) - -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 73 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 117 dB(A) - -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - 28.8 ft - -
    Clearance at Maximum Lift - 19.8 ft - -
    Dump Angle at Maximum Lift - –50.0 degrees - -
    Front Axle Centerline to Bucket Tip - 21.9 ft - -
    Ground to Bumper Clearance - 4.4 ft - -
    Ground to Center of Axles - 6 ft - -
    Ground to Lower Hitch Clearance - 2.9 ft - -
    Ground to Top of Exhaust Stacks - 23.2 ft - -
    Ground to Top of Hood - 18.6 ft - -
    Ground to Top of ROPS - 23.4 ft - -
    Maximum Overall Height - Bucket Raised - 39.3 ft - -
    Maximum Overall Length - 64.6 ft - -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift - 59.5 degrees - -
    Rack Back Angle - Carry - 47.7 degrees - -
    Rack Back Angle - Ground Level - 39.7 degrees - -
    Reach - Maximum Lift - 9.6 ft - -
    Rear Axle - Centerline to Bumper - 20.4 ft - -
    Tread Width - 14.1 ft - -
    Wheel Base - 22.3 ft - -
    Width - Over Tires - With Bulge - 18.8 ft - -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - 31.6 ft - -
    Clearance at Maximum Lift - 22.6 ft - -
    Dump Angle at Maximum Lift - –50.0 degrees - -
    Front Axle Centerline to Bucket Tip - 24.2 ft - -
    Ground to Bumper Clearance - 4.4 ft - -
    Ground to Center of Axles - 6 ft - -
    Ground to Lower Hitch Clearance - 2.9 ft - -
    Ground to Top of Exhaust Stacks - 23.2 ft - -
    Ground to Top of Hood - 18.6 ft - -
    Ground to Top of ROPS - 23.4 ft - -
    Maximum Overall Height - Bucket Raised - 42.1 ft - -
    Maximum Overall Length - 66.9 ft - -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift - 59.4 degrees - -
    Rack Back Angle - Carry - 53.5 degrees - -
    Rack Back Angle - Ground Level - 45 degrees - -
    Reach - Maximum Lift - 9.4 ft - -
    Rear Axle - Centerline to Bumper - 20.4 ft - -
    Tread Width - 14.1 ft - -
    Wheel Base - 22.3 ft - -
    Width - Over Tires - With Bulge - 18.8 ft - -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Ground to Center of Front Axle - - 3.2 ft -
    Ground to Fuel Tank Clearance - - 2.3 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    Reach - Maximum Lift - - 7.1 ft -
    Clearance at Maximum Lift - - 10.1 ft -
    B-Pin Height - Maximum Lift - - 16.1 ft -
    Maximum Overall Height - Bucket Raised - - 22.4 ft -
    Rear Axle - Centerline to Bumper - - 10.3 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 36.6 ft -
    Front Axle Centerline to Bucket Tip - - 13.8 ft -
    Note - -
    • All dimensions are approximate.
    • Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Ground to Center of Front Axle - - 3.2 ft -
    Ground to Fuel Tank Clearance - - 2.3 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    Reach - Maximum Lift - - 7.4 ft -
    Clearance at Maximum Lift - - 11.6 ft -
    B-Pin Height - Maximum Lift - - 17.6 ft -
    Maximum Overall Height - Bucket Raised - - 23.9 ft -
    Rear Axle - Centerline to Bumper - - 10.3 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 38 ft -
    Front Axle Centerline to Bucket Tip - - 15.3 ft -
    Note - -
    • All dimensions are approximate.
    • Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Ground to Center of Rear Axle - - 3.2 ft -
    Ground to Fuel Tank Clearance - - 2.3 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    Reach at Maximum Lift - - 8 ft -
    Clearance at Maximum Lift - - 10.7 ft -
    B-Pin Height at Maximum Lift - - 15 ft -
    Maximum Overall Height, Bucket Raised - - 20.9 ft -
    Rear Axle Center Line to Bumper - - 10.3 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 35 ft -
    Front Axle Centerline to Bucket Tip - - 12.2 ft -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - - 13.5 ft -
    Ground to Top of Exhaust Stacks - - 13.3 ft -
    Ground to Top of Hood - - 10.7 ft -
    Ground to Center of Rear Axle - - 3.2 ft -
    Ground to Fuel Tank Clearance - - 2.3 ft -
    Ground to Lower Hitch Clearance - - 1.5 ft -
    B-Pin Height at Maximum Lift - - 15 ft -
    Rear Axle Center Line to Bumper - - 10.3 ft -
    Wheel Base - - 12.5 ft -
    Maximum Overall Length - - 35.4 ft -
    Front Axle Centerline to Bucket Tip - - 12.6 ft -

    Weights
    Operating Weight - - - 21742 lb

    Buckets
    Bucket Capacities - - - 1.3-3.5 m3 (1.7-4.6 yd3)
    Bucket Capacities - General Purpose - - - 1.3-1.9 m³ (1.7-2.5 yd³)
    Bucket Capacities - Light Material - - - 2.5-3.5 m³ (3.3-4.6 yd³)

    Sustainability
    Recyclability - - - 95%

    Cab
    ROPS - - - ISO 3471:2008
    FOPS - - - ISO 3449:2005
    Note (3) - - - The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
    Note (2) - - - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
    Note (1) - - - Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
    Note (4) - - - *The measurements were conducted with the cab doors and windows closed.

    Loader Hydraulic System
    Maximum Flow - Implement Pump - - - 43.6 gpm
    Relief Pressure - Tilt Cylinder - - - 4641 psi
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard - - - 25 gpm
    Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure - - - 4641 psi
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level - - - 2.7 s
    Note - - - All cycle times listed are with cylinder snubbing turned off.
    Maximum Working Pressure - Implement Pump - - - 4061 psi
    Hydraulic Cycle Time - Total Cycle Time - - - 11.5 s
    Hydraulic Cycle Time - Rackback - - - 2.2 s
    Hydraulic Cycle Time - Dump, at Maximum Reach - - - 1.8 s
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift - - - 4.8 s
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High - - - 40 gpm
    Maximum Flow - Implement Pump - 4rd Function, Maximum Flow - - - 25 gpm

    Steering
    Maximum Working Pressure - Steering Pump - - - 3190 psi
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed - - - 2.3 s
    Steering Articulation Angle - Each Direction - - - 40 °
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - - - 3.4 turns
    Maximum Flow - Steering Pump - - - 21.7 gpm

    Tires
    Other Choices Include - - - 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
    Standard Size - - - 17.5 R25 L2 XTLA
    Note (1) - - - Other tire choices are available. Contact your Cat dealer for details.
    Note (3) - - - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (2) - - - In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
    Add a Similar Product:
    • 992 Wheel Loader Add
    • 990 Wheel Loader Add
    • 988 XE Wheel Loader Add
    • 988 Wheel Loader Add
    • 950 GC Wheel Loader | Front Loader Add
    • 914 Compact Wheel Loader Add
    • 910 Compact Wheel Loader Add
    • 903D Compact Wheel Loader Add