|
|
|
|
Engine |
Engine Model |
Cat® C15 |
Cat® 3516E |
C15 Cat® |
Rated Speed |
2000 |
- |
2000 |
Peak Power Speed |
1600 |
- |
1600 |
Engine Power - ISO 14396 |
449 HP |
1847 HP |
449 HP |
Gross Power - SAE J1995 |
456 HP |
1870 HP |
- |
Net Power - SAE J1349 |
373 HP |
- |
373 HP |
Emissions |
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 |
U.S. EPA Tier 4 Final/EU Stage V or
U.S. EPA Tier 1 equivalent |
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA |
Bore |
5.4 in |
6.7 in |
5.4 in |
Stroke |
6.75 in |
8.5 in |
6.75 in |
Displacement |
927 in³ |
4766 in³ |
927 in² |
Peak Torque - 1,200 rpm - SAE J1995 |
1778 ft·lbf |
8549 lb/ft |
1778 lb/ft |
Torque Rise |
16% |
39% |
16% |
Net Power - SAE J1349 - Standard Ambient |
- |
1739 HP |
- |
Net Power - SAE J1349 - High Ambient |
- |
1696 HP |
- |
Note (1) |
- |
The power ratings apply when tested under the reference conditions for the specified standard. |
- |
Note (2) |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. |
- |
Note (3) |
- |
The gross power advertised is with the fan at maximum speed. |
- |
Peak Power Speed - Gross - SAE J1995 |
- |
- |
456 HP |
Rated Speed - 2,000 rpm - EEC 80/1269 |
- |
- |
373 HP |
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) |
- |
- |
378 HP |
Rated Speed - 2,000 rpm - ISO 9249 |
- |
- |
373 HP |
Rated Speed - 2,000 rpm - ISO 9249 (DIN) |
- |
- |
378 HP |
Operating Specifications |
Operating Weight |
116858 lb |
- |
- |
Rated Payload - Quarry Face |
12.5 ton (US) |
- |
- |
Bucket Capacity Range |
6.4-7.6 m3 (8.3-10 yd3) |
17.2-43.6 m3 (22.3-57 yd3) |
5-10,3 m³ (6,5-13,5 yd.³) |
Cat Truck Match - High Lift |
772/773/775 |
789/793/794 |
772/773 |
Operating Weight - Standard |
- |
543772 lb |
97785 lb |
Operating Weight - High Lift |
- |
547675 lb |
104005 lb |
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) |
- |
60 ton (US) |
- |
Rated Payload - Standard Lift (Moderate to High Digging Resistance) |
- |
50 ton (US) |
- |
Rated Payload - High Lift (Low to Moderate Digging Resistance) |
- |
55 ton (US) |
- |
Rated Payload - High Lift (Moderate to High Digging Resistance) |
- |
50 ton (US) |
- |
Note |
- |
*Please contact your local dealer to determine if your application is suitable for this increased rated payload. |
- |
Cat Truck Match - Standard |
- |
785/789 |
770/735/740/745 |
Rated Payload - Standard (Quarry Face) |
- |
- |
11 ton (US) |
Rated Payload - Loose Material (Standard) |
- |
- |
14 ton (US) |
Rated Payload - High Lift (Quarry Face) |
- |
- |
11 ton (US) |
Rated Payload - Loose Material (High Lift) |
- |
- |
12.1 ton (US) |
Transmission |
Transmission Type |
Cat planetary power shift |
Cat Planetary Power Shift |
Cat planetary power shift |
Forward - 1 |
5 mile/h |
4.6 mile/h |
5 mile/h |
Forward - 2 |
8 mile/h |
8 mile/h |
8 mile/h |
Reverse - 1 |
5 mile/h |
5 mile/h |
5 mile/h |
Reverse - 2 |
8 mile/h |
8.8 mile/h |
8 mile/h |
Direct Drive - Forward 1 |
Lock-up disabled |
Lock-up disables |
- |
Direct Drive - Forward 2 |
8 mile/h |
8.7 mile/h |
8 mile/h |
Direct Drive - Forward 3 |
14 mile/h |
15.2 mile/h |
14 mile/h |
Direct Drive - Forward 4 |
24 mile/h |
- |
24 mile/h |
Direct Drive - Reverse 1 |
Lock-up disabled |
Lock-up disables |
- |
Direct Drive - Reverse 2 |
9 mile/h |
9.6 mile/h |
9 mile/h |
Direct Drive - Reverse 3 |
16 mile/h |
16.8 mile/h |
16 mile/h |
Direct Drive - Reverse 4 |
25.4 mile/h |
- |
25.4 mile/h |
Forward - 3 |
- |
13.6 mile/h |
- |
Reverse - 3 |
- |
14.9 mile/h |
- |
Note |
- |
Travel speeds based on 58/85-57 tires. |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
EH - Load Sense |
Positive Flow Control |
Load Sense |
Lift/Tilt System |
2X x 145 cc Variable displacement piston |
- |
- |
Maximum Flow at 2,165 rpm |
159 gal/min |
- |
123 gal/min |
Relief Valve Setting - Lift/Tilt |
4598 psi |
5004 psi |
4050 psi |
Cylinders, Double Acting - Lift, Bore and Stroke |
190 mm x 1216 mm (7.5 in x 48 in) |
370 × 1713 mm (14.6 × 67.4 in) |
- |
Cylinders, Double Acting - Tilt, Bore and Stroke |
170 mm x 722 mm (6.7 in x 28.4 in) |
310 × 1086 mm (12.2 × 42.8 in) |
- |
Pilot System |
Variable displacement piston |
Open Loop and Pressure Reducing |
- |
Tilt Cylinder - Stroke |
27 in |
- |
28.4 in |
Lift/Tilt System - Pump |
- |
Variable Displacement Piston |
2 × 110 cc variable displacement |
Maximum Flow at 1,700 rpm Engine Speed |
- |
541 gal/min |
- |
Lift Cylinder - Bore |
- |
- |
7.5 in |
Lift Cylinder - Stroke |
- |
- |
45 in |
Tilt Cylinder - Bore |
- |
- |
6.7 in |
Hydraulic Cycle Times |
Rack Back |
3.8 s |
4.9 s |
4.5 s |
Raise |
7.5 s |
12.6 s |
9 s |
Dump |
3 s |
3.1 s |
3.5 s |
Lower Float Down |
4.6 s |
4.2 s |
4.3 s |
Total Hydraulic Cycle Time - Empty Bucket |
18.9 s |
- |
- |
Lower |
- |
- |
5.2 s |
Total Hydraulic Cycle Time |
- |
- |
21.3 s |
Hydraulic System - Steering |
Steering System - Circuit |
Pilot, load sensing |
Pilot, Load Sensing |
Load Sense |
Steering System - Pump |
Piston, variable displacement |
Piston, Variable Displacement |
Piston, variable displacement |
Maximum Flow |
52 gal (US) |
- |
- |
Relief Valve Setting - Steering |
4000 psi |
- |
- |
Total Steering Angle |
70° |
80 degrees |
70° |
Steering Cycle Times - High Idle |
3 s |
4.3 s |
- |
Steering Cycle Times - Low Idle |
5.2 s |
7.6 s |
- |
Maximum Flow at 1,400 rpm |
- |
- |
52 gal/min |
Steering Cut Off Pressure |
- |
- |
4000 psi |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Axles |
Front |
Fixed |
Fixed |
Fixed |
Rear |
Trunnion |
Trunnion |
Trunnion |
Oscillation Angle |
+/-12.5° |
9° |
±12.5° |
Oscillation Angle - Chain Arrangement |
- |
- |
±8.5° |
Brakes |
Brakes |
ISO 3450:2011 |
ISO 3450:2011 |
ISO 3450:2011 |
Operator's Cab |
ROPS/FOPS |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
- |
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) |
Service Refill Capacities |
Fuel Tank |
141 gal (US) |
- |
141 gal (US) |
Cooling System |
27 gal (US) |
- |
- |
Engine Crankcase |
9 gal (US) |
- |
- |
Diesel Exhaust Fluid Tank |
5.5 gal (US) |
- |
6 gal (US) |
Transmission |
20 gal (US) |
- |
20 gal (US) |
Differential - Final Drives - Front |
49 gal (US) |
- |
- |
Differential - Final Drives - Rear |
45 gal (US) |
- |
- |
Note |
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a |
- |
- |
Fuel Tank - Short Lift |
- |
- |
127 gal (US) |
Cooling Systems |
- |
- |
26 gal (US) |
Crankcase |
- |
- |
9 gal (US) |
Axle Oil - Differentials and Final Drives - Front |
- |
- |
49 gal (US) |
Axle Oil - Differentials and Final Drives - Rear |
- |
- |
45 gal (US) |
Hydraulic System Factory Fill |
- |
- |
87 gal (US) |
Hydraulic System - Tank Only |
- |
- |
34 gal (US) |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
72 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
110 dB(A) |
- |
- |
Note (1) |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
- |
- |
Note (2) |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
- |
Note (3) |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
- |
- |
Dimensions (Approximate) - High Lift |
Ground to Top of ROPS |
13.5 ft |
- |
- |
Ground to Top of Exhaust Stacks |
13.3 ft |
- |
- |
Ground to Top of Hood |
10.7 ft |
- |
- |
Rear Axle - Centerline to Bumper |
10.3 ft |
- |
- |
Front Axle Centerline to Bucket Tip |
15.7 ft |
- |
- |
Wheel Base |
12.5 ft |
- |
- |
Maximum Overall Length |
39.5 ft |
- |
- |
Ground to Lower Hitch Clearance |
1.5 ft |
- |
- |
Clearance at Maximum Lift |
12 ft |
- |
- |
B-Pin Height - Maximum Lift |
18.7 ft |
- |
- |
Maximum Overall Height - Bucket Raised |
25 ft |
- |
- |
Reach - Maximum Lift |
7.7 ft |
- |
- |
Note |
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. |
- |
- |
Buckets |
Bucket Capacities |
6.4-7.6 m3 (8.3-10 yd3) |
- |
- |
Sustainability |
Recyclability |
96% |
- |
- |
Complete System Fill |
Fuel Tank - Standard |
- |
856 gal (US) |
- |
Fuel Tank - With 24 hr Attachment |
- |
1414 gal (US) |
- |
Cooling System |
- |
138 gal (US) |
- |
Engine Crankcase |
- |
76 gal (US) |
- |
Transmission |
- |
110 gal (US) |
- |
Differential - Final Drives - Front |
- |
220 gal (US) |
- |
Differential - Final Drives - Rear |
- |
200 gal (US) |
- |
Hydraulic Tank - Implement and Hydraulic Fan |
- |
270 gal (US) |
- |
Hydraulic Tank - Steering and Braking |
- |
100 gal (US) |
- |
Oil Renewal System (ORS)* |
- |
20 gal (US) |
- |
Note |
- |
*Not available on Tier 4 Final/Stage V machines. Not available in all regions. |
- |
Cooling System |
Ambient Capability Hydraulically Driven Demand Fan - Standard |
- |
109.4 °F |
- |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) |
- |
131 °F |
- |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) |
- |
127.4 °F |
- |
Sound Performance - Standard |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
- |
74 dB(A) |
- |
Machine Sound Level (ISO 6395:2008) |
- |
119 dB(A) |
- |
Note |
- |
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
|
Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
Machine Sound Level (ISO 6395) |
- |
- |
112 dB(A) |
Sound Performance - Suppression |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
- |
73 dB(A) |
- |
Machine Sound Level (ISO 6395:2008) |
- |
117 dB(A) |
- |
Note |
- |
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
|
Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
Machine Sound Level (ISO 6395) |
- |
- |
110 dB(A) |
Dimensions - Standard Lift - Approximate |
B-Pin Height - Maximum Lift |
- |
28.8 ft |
- |
Clearance at Maximum Lift |
- |
19.8 ft |
- |
Dump Angle at Maximum Lift |
- |
–50.0 degrees |
- |
Front Axle Centerline to Bucket Tip |
- |
21.9 ft |
- |
Ground to Bumper Clearance |
- |
4.4 ft |
- |
Ground to Center of Axles |
- |
6 ft |
- |
Ground to Lower Hitch Clearance |
- |
2.9 ft |
- |
Ground to Top of Exhaust Stacks |
- |
23.2 ft |
- |
Ground to Top of Hood |
- |
18.6 ft |
- |
Ground to Top of ROPS |
- |
23.4 ft |
- |
Maximum Overall Height - Bucket Raised |
- |
39.3 ft |
- |
Maximum Overall Length |
- |
64.6 ft |
- |
Note |
- |
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
- |
Rack Angle at Maximum Lift |
- |
59.5 degrees |
- |
Rack Back Angle - Carry |
- |
47.7 degrees |
- |
Rack Back Angle - Ground Level |
- |
39.7 degrees |
- |
Reach - Maximum Lift |
- |
9.6 ft |
- |
Rear Axle - Centerline to Bumper |
- |
20.4 ft |
- |
Tread Width |
- |
14.1 ft |
- |
Wheel Base |
- |
22.3 ft |
- |
Width - Over Tires - With Bulge |
- |
18.8 ft |
- |
Dimensions - High Lift - Approximate |
B-Pin Height - Maximum Lift |
- |
31.6 ft |
- |
Clearance at Maximum Lift |
- |
22.6 ft |
- |
Dump Angle at Maximum Lift |
- |
–50.0 degrees |
- |
Front Axle Centerline to Bucket Tip |
- |
24.2 ft |
- |
Ground to Bumper Clearance |
- |
4.4 ft |
- |
Ground to Center of Axles |
- |
6 ft |
- |
Ground to Lower Hitch Clearance |
- |
2.9 ft |
- |
Ground to Top of Exhaust Stacks |
- |
23.2 ft |
- |
Ground to Top of Hood |
- |
18.6 ft |
- |
Ground to Top of ROPS |
- |
23.4 ft |
- |
Maximum Overall Height - Bucket Raised |
- |
42.1 ft |
- |
Maximum Overall Length |
- |
66.9 ft |
- |
Note |
- |
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
- |
Rack Angle at Maximum Lift |
- |
59.4 degrees |
- |
Rack Back Angle - Carry |
- |
53.5 degrees |
- |
Rack Back Angle - Ground Level |
- |
45 degrees |
- |
Reach - Maximum Lift |
- |
9.4 ft |
- |
Rear Axle - Centerline to Bumper |
- |
20.4 ft |
- |
Tread Width |
- |
14.1 ft |
- |
Wheel Base |
- |
22.3 ft |
- |
Width - Over Tires - With Bulge |
- |
18.8 ft |
- |
Dimensions (Approximate) - Standard Lift Linkage |
Ground to Top of ROPS |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
10.7 ft |
Ground to Center of Front Axle |
- |
- |
3.2 ft |
Ground to Fuel Tank Clearance |
- |
- |
2.3 ft |
Ground to Lower Hitch Clearance |
- |
- |
1.5 ft |
Reach - Maximum Lift |
- |
- |
7.1 ft |
Clearance at Maximum Lift |
- |
- |
10.1 ft |
B-Pin Height - Maximum Lift |
- |
- |
16.1 ft |
Maximum Overall Height - Bucket Raised |
- |
- |
22.4 ft |
Rear Axle - Centerline to Bumper |
- |
- |
10.3 ft |
Wheel Base |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
36.6 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
13.8 ft |
Note |
- |
- |
- All dimensions are approximate.
- Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
|
Dimensions (Approximate) - High Lift Linkage |
Ground to Top of ROPS |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
10.7 ft |
Ground to Center of Front Axle |
- |
- |
3.2 ft |
Ground to Fuel Tank Clearance |
- |
- |
2.3 ft |
Ground to Lower Hitch Clearance |
- |
- |
1.5 ft |
Reach - Maximum Lift |
- |
- |
7.4 ft |
Clearance at Maximum Lift |
- |
- |
11.6 ft |
B-Pin Height - Maximum Lift |
- |
- |
17.6 ft |
Maximum Overall Height - Bucket Raised |
- |
- |
23.9 ft |
Rear Axle - Centerline to Bumper |
- |
- |
10.3 ft |
Wheel Base |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
38 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
15.3 ft |
Note |
- |
- |
- All dimensions are approximate.
- Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
|
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket |
Ground to Top of ROPS |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
10.7 ft |
Ground to Center of Rear Axle |
- |
- |
3.2 ft |
Ground to Fuel Tank Clearance |
- |
- |
2.3 ft |
Ground to Lower Hitch Clearance |
- |
- |
1.5 ft |
Reach at Maximum Lift |
- |
- |
8 ft |
Clearance at Maximum Lift |
- |
- |
10.7 ft |
B-Pin Height at Maximum Lift |
- |
- |
15 ft |
Maximum Overall Height, Bucket Raised |
- |
- |
20.9 ft |
Rear Axle Center Line to Bumper |
- |
- |
10.3 ft |
Wheel Base |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
35 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
12.2 ft |
Dimensions (Approximate) - Quick Coupler and Fork |
Ground to Top of ROPS |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
10.7 ft |
Ground to Center of Rear Axle |
- |
- |
3.2 ft |
Ground to Fuel Tank Clearance |
- |
- |
2.3 ft |
Ground to Lower Hitch Clearance |
- |
- |
1.5 ft |
B-Pin Height at Maximum Lift |
- |
- |
15 ft |
Rear Axle Center Line to Bumper |
- |
- |
10.3 ft |
Wheel Base |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
35.4 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
12.6 ft |