U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
-
Bore
5.4 in
5.4 in
-
Stroke
6.75 in
6.75 in
-
Displacement
927 in³
927 in²
-
Peak Torque - 1,200 rpm - SAE J1995
1778 ft·lbf
1778 lb/ft
-
Torque Rise
16%
16%
-
Peak Power Speed - Gross - SAE J1995
-
456 HP
-
Rated Speed - 2,000 rpm - EEC 80/1269
-
373 HP
-
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)
-
378 HP
-
Rated Speed - 2,000 rpm - ISO 9249
-
373 HP
-
Rated Speed - 2,000 rpm - ISO 9249 (DIN)
-
378 HP
-
Operating Specifications
Operating Weight
116858 lb
-
-
Rated Payload - Quarry Face
12.5 ton (US)
-
-
Bucket Capacity Range
6.4-7.6 m3 (8.3-10 yd3)
5-10,3 m³ (6,5-13,5 yd.³)
-
Cat Truck Match - High Lift
772/773/775
772/773
-
Operating Weight - Standard
-
97785 lb
-
Operating Weight - High Lift
-
104005 lb
-
Rated Payload - Standard (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (Standard)
-
14 ton (US)
-
Rated Payload - High Lift (Quarry Face)
-
11 ton (US)
-
Rated Payload - Loose Material (High Lift)
-
12.1 ton (US)
-
Cat Truck Match - Standard
-
770/735/740/745
-
Transmission
Transmission Type
Cat planetary power shift
Cat planetary power shift
-
Forward - 1
5 mile/h
5 mile/h
-
Forward - 2
8 mile/h
8 mile/h
-
Reverse - 1
5 mile/h
5 mile/h
-
Reverse - 2
8 mile/h
8 mile/h
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8 mile/h
8 mile/h
-
Direct Drive - Forward 3
14 mile/h
14 mile/h
-
Direct Drive - Forward 4
24 mile/h
24 mile/h
-
Direct Drive - Reverse 1
Lock-up disabled
-
-
Direct Drive - Reverse 2
9 mile/h
9 mile/h
-
Direct Drive - Reverse 3
16 mile/h
16 mile/h
-
Direct Drive - Reverse 4
25.4 mile/h
25.4 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
EH - Load Sense
Load Sense
-
Lift/Tilt System
2X x 145 cc Variable displacement piston
-
-
Maximum Flow at 2,165 rpm
159 gal/min
123 gal/min
-
Relief Valve Setting - Lift/Tilt
4598 psi
4050 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
190 mm x 1216 mm (7.5 in x 48 in)
-
-
Cylinders, Double Acting - Tilt, Bore and Stroke
170 mm x 722 mm (6.7 in x 28.4 in)
-
-
Pilot System
Variable displacement piston
-
-
Tilt Cylinder - Stroke
27 in
28.4 in
-
Lift/Tilt System - Pump
-
2 × 110 cc variable displacement
-
Lift Cylinder - Bore
-
7.5 in
-
Lift Cylinder - Stroke
-
45 in
-
Tilt Cylinder - Bore
-
6.7 in
-
Hydraulic Cycle Times
Rack Back
3.8 s
4.5 s
-
Raise
7.5 s
9 s
-
Dump
3 s
3.5 s
-
Lower Float Down
4.6 s
4.3 s
-
Total Hydraulic Cycle Time - Empty Bucket
18.9 s
-
-
Lower
-
5.2 s
-
Total Hydraulic Cycle Time
-
21.3 s
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Load Sense
-
Steering System - Pump
Piston, variable displacement
Piston, variable displacement
-
Maximum Flow
52 gal (US)
-
-
Relief Valve Setting - Steering
4000 psi
-
-
Total Steering Angle
70°
70°
-
Steering Cycle Times - High Idle
3 s
-
-
Steering Cycle Times - Low Idle
5.2 s
-
-
Maximum Flow at 1,400 rpm
-
52 gal/min
-
Steering Cut Off Pressure
-
4000 psi
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Axles
Front
Fixed
Fixed
-
Rear
Trunnion
Trunnion
-
Oscillation Angle
+/-12.5°
±12.5°
-
Oscillation Angle - Chain Arrangement
-
±8.5°
-
Brakes
Brakes
ISO 3450:2011
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
-
Service Refill Capacities
Fuel Tank
141 gal (US)
141 gal (US)
-
Cooling System
27 gal (US)
-
-
Engine Crankcase
9 gal (US)
-
-
Diesel Exhaust Fluid Tank
5.5 gal (US)
6 gal (US)
-
Transmission
20 gal (US)
20 gal (US)
-
Differential - Final Drives - Front
49 gal (US)
-
-
Differential - Final Drives - Rear
45 gal (US)
-
-
Note
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
-
-
Fuel Tank - Short Lift
-
127 gal (US)
-
Cooling Systems
-
26 gal (US)
-
Crankcase
-
9 gal (US)
-
Axle Oil - Differentials and Final Drives - Front
-
49 gal (US)
-
Axle Oil - Differentials and Final Drives - Rear
-
45 gal (US)
-
Hydraulic System Factory Fill
-
87 gal (US)
-
Hydraulic System - Tank Only
-
34 gal (US)
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
72 dB(A)
-
-
Machine Sound Level (ISO 6395)
110 dB(A)
-
-
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
13.5 ft
-
-
Ground to Top of Exhaust Stacks
13.3 ft
-
-
Ground to Top of Hood
10.7 ft
-
-
Rear Axle - Centerline to Bumper
10.3 ft
-
-
Front Axle Centerline to Bucket Tip
15.7 ft
-
-
Wheel Base
12.5 ft
-
-
Maximum Overall Length
39.5 ft
-
-
Ground to Lower Hitch Clearance
1.5 ft
-
-
Clearance at Maximum Lift
12 ft
-
-
B-Pin Height - Maximum Lift
18.7 ft
-
-
Maximum Overall Height - Bucket Raised
25 ft
-
-
Reach - Maximum Lift
7.7 ft
-
-
Note
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
-
-
Buckets
Bucket Capacities
6.4-7.6 m3 (8.3-10 yd3)
-
-
Sustainability
Recyclability
96%
-
-
Sound Performance - Standard
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
112 dB(A)
-
Note
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing protection may be neede
-
Sound Performance - Suppression
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
110 dB(A)
-
Note
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing protection may be neede
-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Ground to Center of Front Axle
-
3.2 ft
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Reach - Maximum Lift
-
7.1 ft
-
Clearance at Maximum Lift
-
10.1 ft
-
B-Pin Height - Maximum Lift
-
16.1 ft
-
Maximum Overall Height - Bucket Raised
-
22.4 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
36.6 ft
-
Front Axle Centerline to Bucket Tip
-
13.8 ft
-
Note
-
All dimensions are approximate.
Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Ground to Center of Front Axle
-
3.2 ft
-
Ground to Fuel Tank Clearance
-
2.3 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Reach - Maximum Lift
-
7.4 ft
-
Clearance at Maximum Lift
-
11.6 ft
-
B-Pin Height - Maximum Lift
-
17.6 ft
-
Maximum Overall Height - Bucket Raised
-
23.9 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
38 ft
-
Front Axle Centerline to Bucket Tip
-
15.3 ft
-
Note
-
All dimensions are approximate.
Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
