CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    992 Wheel Loader
    View Product
    988 Wheel Loader
    View Product Remove
    982 XE
    View Product Remove

    Engine
    Net Power 814 HP - -
    Engine Model Cat® C32B Cat® C18 ™ Cat C13
    Emissions U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II -
    Rated Speed 1750 rpm 1700/min -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard 900 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient 937 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard 907 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient 944 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard 884 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient 921 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard 893 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient 931 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard 823 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient 823 HP - -
    Bore 5.7 in 5.7 in -
    Stroke 6.4 in 7.2 in -
    Displacement 1963.5 in³ 1105 in³ 12.5L
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm 3514 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm 3555 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm 3537 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm 3570 ft·lbf - -
    Net Power - SAE J1349:2011 - 538 HP -
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Peak Power Speed - 1500/rpm -
    Peak Torque - 1,200 rpm - 2230 lb/ft -
    Torque Rise - 58 % -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 404 HP
    Note (1) - - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 432 HP
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - 1636 lb/ft
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 436 HP
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1515 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - 1620 lb/ft
    Note (3) - - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h

    Operating Specifications
    Operating Weight 233430 lb 112574 lb -
    Rated Payload - Standard 25.5 ton (US) - -
    Rated Payload - Standard (Material Handler) 30 ton (US) - -
    Rated Payload - High Lift 22.5 ton (US) - -
    Rated Payload - High Lift (Material Handler) 27 ton (US) - -
    Bucket Capacity Range 11.5-24.5 m³ (15-32 yd³) 4.7-13 m3 (6.2-17 yd3) -
    Cat Truck Match - Standard 775/777 770～772 -
    Cat Truck Match - High Lift 785 773～775 -
    Rated Payload - Quarry Face - 12.5 t -
    Rated Payload - Loose Material - 16 t -
    Breakout Force - - 59060 lbf
    Note (1) - - For a machine configuration as defined under Weight.
    Note (2) - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - 22418 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - 46526 lb

    Buckets
    Bucket Capacities 11.5-24.5 m³ (15-32 yd³) 4.7-13 m3 (6.2-17 yd3) -

    Transmission
    Transmission Type Cat Planetary Powershift Cat planetary powershift -
    Forward - 1 4.3 mile/h 4 mile/h 3.9 mile/h
    Forward - 2 7.4 mile/h 7.2 mile/h 7.3 mile/h
    Forward - 3 12.7 mile/h 12.7 mile/h 13 mile/h
    Direct Drive - Forward 1 Disabled Lock-up disabled -
    Direct Drive - Forward 2 8 mile/h 7.8 mile/h -
    Direct Drive - Forward 3 14 mile/h 13.9 mile/h -
    Reverse - 1 4.7 mile/h 4.7 mile/h 4.4 mile/h
    Reverse - 2 8.1 mile/h 8.3 mile/h 8.4 mile/h
    Reverse - 3 13.9 mile/h 14.4 mile/h 17.4 mile/h
    Direct Drive - Reverse 1 5 mile/h 5 mile/h -
    Direct Drive - Reverse 2 8.8 mile/h 8.9 mile/h -
    Direct Drive - Reverse 3 15.3 mile/h 15.8 mile/h -
    Forward - 4 - 21.6 mile/h 24.5 mile/h
    Direct Drive - Forward 4 - 24.4 mile/h -
    Note - - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive Flow Control EH- Positive Flow Control, Flow Sharing -
    Lift/Tilt System - Pump Variable Displacement Piston - -
    Maximum Flow at 2,165 rpm 250 gal/min - -
    Relief Valve Setting - Lift/Tilt 5000 psi 4757 psi -
    Lift Cylinder - Bore 9.3 in - -
    Lift Cylinder - Stroke 63.5 in - -
    Tilt Cylinder - Bore 11.5 in - -
    Tilt Cylinder - Stroke 41.5 in - -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 1,400-1,860 rpm - 153 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - 210 mm × 1050 mm (8.7 in × 41.3 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 269 mm × 685 mm (8.7 in × 27 in) -
    Pilot System - Variable displacement piston -
    Relief Valve Setting - Main - 551 psi -

    Hydraulic Cycle Times
    Rack Back 2.3 s - -
    Rack Back - High Lift 2.3 s - -
    Raise 9 s - -
    Raise - High Lift 9 s - -
    Dump 2.6 s - -
    Dump - High Lift 2.6 s - -
    Float Down 3.2 s - -
    Float Down - High Lift 3.2 s - -
    Total Hydraulic Cycle Time 17.1 s - -

    Service Refill Capacities
    Fuel Tank 385.7 gal (US) 188 gal (US) 112.5 gal (US)
    Cooling Systems 59.4 gal (US) - -
    Crankcase 31.7 gal (US) 15.9 gal (US) 9.8 gal (US)
    Transmission 51.5 gal (US) 31.7 gal (US) 20.3 gal (US)
    Differential - Final Drives - Front 96.4 gal (US) 49.1 gal (US) 24.3 gal (US)
    Differential - Final Drives - Rear 96.4 gal (US) 49.1 gal (US) 24.3 gal (US)
    Hydraulic System Factory Fill (Implement) 104.1 gal (US) - -
    Hydraulic Tank - Implement 60.2 gal (US) - -
    Hydraulic Factory Fill (Steering) 32.5 gal (US) - -
    Hydraulic Tank (Steering Tank Only) 26.3 gal (US) - -
    Cooling System - 31.7 gal (US) 13.7 gal (US)
    Coolant (Validated by Test Cell Fill Quantities) - 33 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) -
    Transmission - Validated by Test Cell Fill Quantities - 29 gal (US) -
    Hydraulic System Factory Fill - 125.5 gal (US) -
    Hydraulic System - Tank Only - 63.4 gal (US) -
    DEF Tank - - 5.5 gal (US)
    Hydraulic Tank - - 40.4 gal (US)

    Axles
    Front Fixed Fixed -
    Rear Trunnion Trunnion -
    Oscillation Angle ±9° 13 ° -

    Brakes
    Brakes ISO 3450:2011 ISO 3450:2011 -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, Load Sensing Pilot, load sensing -
    Steering System - Pump Piston, Variable Displacement Piston, variable displacement -
    Maximum Flow at 1,400-1,850 rpm 70 gal/min - -
    Steering Cut Off Pressure 4500 psi - -
    Total Steering Angle 80° 86 ° -
    Steering Cycle Times - Low Idle 4.9 s 5.6 s -
    Steering Cycle Times - High Idle 3.1 s 3.4 s -
    Maximum Flow - 71.3 gal/min -
    Relief Valve Setting - Steering - 4351 psi -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
    Ambient Capability, Hydraulically Driven Demand Fan - High 131 °F - -

    Sound Performance - Standard
    Note Machine Sound Level (ISO 6396:2008) - 116 dB(A) - -

    Sound Performance - Suppression
    Note Machine Sound Level (ISO 6396:2008) - 113 dB(A) - -

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks 17 ft - -
    Ground to Top of ROPS 18.3 ft - -
    Ground to Top of Hood 13.1 ft - -
    Ground to Center of Front Axle 4.3 ft - -
    Ground to Bumper Clearance 3.8 ft - -
    Ground to Lower Hitch Clearance 2.2 ft - -
    Reach - Maximum Lift 8.2 ft - -
    Clearance at Maximum Lift 15.2 ft - -
    B-Pin Height - Maximum Lift 22.8 ft - -
    Maximum Overall Height - Bucket Raised 30.8 ft - -
    Rear Axle - Centerline to Bumper 13.5 ft - -
    Tread Width 10.83 ft - -
    Rack Back Angle - Maximum Lift 56.9 degrees - -
    Dump Angle at Maximum Lift -49.5 degrees - -
    Rack Back Angle - Ground Level 40.2 degrees - -
    Width - Over Tires - With Bulge 14.74 ft - -
    Rack Back Angle - Carry 48.9 degrees - -
    Wheel Base 19.3 ft - -
    Maximum Overall Length 50.8 ft - -
    Front Axle Centerline to Bucket Tip 18 ft - -

    Dimensions - High Lift - Approximate
    Tread Width 10.83 ft - -
    Rack Back Angle - Ground Level 42.5 degrees - -
    Dump Angle at Maximum Lift -48.1 degrees - -
    Rack Back Angle - Maximum Lift 56.2 degrees - -
    Width - Over Tires - With Bulge 14.75 ft - -
    Rack Back Angle - Carry 51.6 degrees - -
    Ground to Top of Exhaust Stacks 17 ft - -
    Ground to Top of ROPS 18.3 ft - -
    Ground to Top of Hood 13.1 ft - -
    Ground to Center of Front Axle 4.3 ft - -
    Ground to Bumper Clearance 3.8 ft - -
    Ground to Lower Hitch Clearance 2.2 ft - -
    Reach - Maximum Lift 7.6 ft - -
    Clearance at Maximum Lift 17.2 ft - -
    B-Pin Height - Maximum Lift 24.5 ft - -
    Maximum Overall Height - Bucket Raised 32 ft - -
    Rear Axle - Centerline to Bumper 13.5 ft - -
    Wheel Base 19.3 ft - -
    Maximum Overall Length 51.6 ft - -
    Front Axle Centerline to Bucket Tip 18.8 ft - -

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - 4.5 s -
    Raise - 8 s -
    Dump - 2.2 s -
    Lower Float Down - 3.5 s -
    Total Hydraulic Cycle Time - Empty Bucket - 18.2 s -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 111 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 112 dB(A) -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -

    Weights
    Operating Weight - - 78264 lb
    Note - - Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun

    Bucket Capacities
    Bucket Range - - 4.8-17.2 m³ 6.25-22.5 yd³

    Sound
    Note (1) - - * For machines in European Union countries and in countries that adopt the “EU Directives.”
    Note (2) - - European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - 107
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - 70 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - 110 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - 75
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - 70 dB(A)

    Hydraulic System
    Implement System - Maximum Operating Pressure - - 4975 psi
    Implement System - Maximum Pump Output at 2,250 rpm - - 119 gal/min
    Hydraulic Cycle Time - Total - - 10.1 seconds

    Dimensions
    Note - - All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - 9.4 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 1.4 ft
    Height - Top of Exhaust Pipe - - 12.4 ft
    Height - Top of Hood - - 10 ft
    Height - Top of ROPS - - 12.6 ft
    Hinge Pin Height at Carry - - 2.11 ft
    Hinge Pin Height at Maximum Lift - - 16.1 ft
    Lift Arm Clearance at Maximum Lift - - 13.4 ft
    Overall Length - Without Bucket - - 29.11 ft
    Tread Width - - 8.4 ft
    Wheel Base - - 12.6 ft
    Width over Tires (Loaded) - - 11.5 ft

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.95 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 428 mm
    Height - Top of Exhaust Pipe - - 3736 mm
    Height - Top of Hood - - 3036 mm
    Height - Top of ROPS - - 3801 mm
    Hinge Pin Height at Carry - - 2.7 ft
    Hinge Pin Height at Maximum Lift - - 4741 mm
    Lift Arm Clearance at Maximum Lift - - 3902 mm
    Overall Length - Without Bucket - - 8597 mm
    Tread Width - - 8.4 ft
    Wheel Base - - 3800 mm
    Width over Tires (Loaded) - - 11.5 ft
    Add a Similar Product: