CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    992 Wheel Loader
    View Product
    986 Wheel Loader
    View Product Remove
    980
    View Product Remove

    Engine
    Net Power 814 HP - -
    Engine Model Cat® C32B C15 Cat® Cat C13
    Emissions U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA -
    Rated Speed 1750 rpm 2000 -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard 900 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient 937 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard 907 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient 944 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard 884 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient 921 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard 893 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient 931 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard 823 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient 823 HP - -
    Bore 5.7 in 5.4 in -
    Stroke 6.4 in 6.75 in -
    Displacement 1963.5 in³ 927 in² 12.5 L
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm 3514 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm 3555 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm 3537 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm 3570 ft·lbf - -
    Peak Power Speed - 1600 -
    Peak Power Speed - Gross - SAE J1995 - 456 HP -
    Engine Power - ISO 14396 - 449 HP -
    Net Power - SAE J1349 - 373 HP -
    Rated Speed - 2,000 rpm - EEC 80/1269 - 373 HP -
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - 378 HP -
    Rated Speed - 2,000 rpm - ISO 9249 - 373 HP -
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - 378 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 lb/ft -
    Torque Rise - 16% -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 393 HP
    Note (1) - - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - 1627 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - 1612 lb/ft
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 425 HP
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1539 lb/ft
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 429 HP
    Note (3) - - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h

    Operating Specifications
    Operating Weight 233430 lb - -
    Rated Payload - Standard 25.5 ton (US) - -
    Rated Payload - Standard (Material Handler) 30 ton (US) - -
    Rated Payload - High Lift 22.5 ton (US) - -
    Rated Payload - High Lift (Material Handler) 27 ton (US) - -
    Bucket Capacity Range 11.5-24.5 m³ (15-32 yd³) 5-10,3 m³ (6,5-13,5 yd.³) -
    Cat Truck Match - Standard 775/777 770/735/740/745 -
    Cat Truck Match - High Lift 785 772/773 -
    Operating Weight - Standard - 97785 lb -
    Operating Weight - High Lift - 104005 lb -
    Rated Payload - Standard (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (Standard) - 14 ton (US) -
    Rated Payload - High Lift (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (High Lift) - 12.1 ton (US) -
    Breakout Force - - 51008 lb
    Note (1) - - For a machine configuration as defined under �Weight.�
    Note (2) - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - 20965 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - 43432 lb

    Buckets
    Bucket Capacities 11.5-24.5 m³ (15-32 yd³) - -

    Transmission
    Transmission Type Cat Planetary Powershift Cat planetary power shift -
    Forward - 1 4.3 mile/h 5 mile/h 4.3 mile/h
    Forward - 2 7.4 mile/h 8 mile/h 8.3 mile/h
    Forward - 3 12.7 mile/h - 14.6 mile/h
    Direct Drive - Forward 1 Disabled - -
    Direct Drive - Forward 2 8 mile/h 8 mile/h -
    Direct Drive - Forward 3 14 mile/h 14 mile/h -
    Reverse - 1 4.7 mile/h 5 mile/h 4.8 mile/h
    Reverse - 2 8.1 mile/h 8 mile/h 9.4 mile/h
    Reverse - 3 13.9 mile/h - 16.7 mile/h
    Direct Drive - Reverse 1 5 mile/h - -
    Direct Drive - Reverse 2 8.8 mile/h 9 mile/h -
    Direct Drive - Reverse 3 15.3 mile/h 16 mile/h -
    Direct Drive - Forward 4 - 24 mile/h -
    Direct Drive - Reverse 4 - 25.4 mile/h -
    Forward - 4 - - 24.5 mile/h
    Note - - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
    Reverse - 4 - - 24.5 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive Flow Control Load Sense -
    Lift/Tilt System - Pump Variable Displacement Piston 2 × 110 cc variable displacement -
    Maximum Flow at 2,165 rpm 250 gal/min 123 gal/min -
    Relief Valve Setting - Lift/Tilt 5000 psi 4050 psi -
    Lift Cylinder - Bore 9.3 in 7.5 in -
    Lift Cylinder - Stroke 63.5 in 45 in -
    Tilt Cylinder - Bore 11.5 in 6.7 in -
    Tilt Cylinder - Stroke 41.5 in 28.4 in -

    Hydraulic Cycle Times
    Rack Back 2.3 s 4.5 s -
    Rack Back - High Lift 2.3 s - -
    Raise 9 s 9 s -
    Raise - High Lift 9 s - -
    Dump 2.6 s 3.5 s -
    Dump - High Lift 2.6 s - -
    Float Down 3.2 s - -
    Float Down - High Lift 3.2 s - -
    Total Hydraulic Cycle Time 17.1 s 21.3 s -
    Lower - 5.2 s -
    Lower Float Down - 4.3 s -

    Service Refill Capacities
    Fuel Tank 385.7 gal (US) 141 gal (US) 112.5 gal (US)
    Cooling Systems 59.4 gal (US) 26 gal (US) -
    Crankcase 31.7 gal (US) 9 gal (US) 9.8 gal (US)
    Transmission 51.5 gal (US) 20 gal (US) 20.3 gal (US)
    Differential - Final Drives - Front 96.4 gal (US) - 22.2 gal (US)
    Differential - Final Drives - Rear 96.4 gal (US) - 22.4 gal (US)
    Hydraulic System Factory Fill (Implement) 104.1 gal (US) - -
    Hydraulic Tank - Implement 60.2 gal (US) - -
    Hydraulic Factory Fill (Steering) 32.5 gal (US) - -
    Hydraulic Tank (Steering Tank Only) 26.3 gal (US) - -
    Fuel Tank - Short Lift - 127 gal (US) -
    Diesel Exhaust Fluid Tank - 6 gal (US) -
    Axle Oil - Differentials and Final Drives - Front - 49 gal (US) -
    Axle Oil - Differentials and Final Drives - Rear - 45 gal (US) -
    Hydraulic System Factory Fill - 87 gal (US) -
    Hydraulic System - Tank Only - 34 gal (US) -
    Cooling System - - 13.7 gal (US)
    DEF Tank - - 5.5 gal (US)
    Hydraulic Tank - - 40.4 gal (US)

    Axles
    Front Fixed Fixed -
    Rear Trunnion Trunnion -
    Oscillation Angle ±9° ±12.5° -
    Oscillation Angle - Chain Arrangement - ±8.5° -

    Brakes
    Brakes ISO 3450:2011 ISO 3450:2011 -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, Load Sensing Load Sense -
    Steering System - Pump Piston, Variable Displacement Piston, variable displacement -
    Maximum Flow at 1,400-1,850 rpm 70 gal/min - -
    Steering Cut Off Pressure 4500 psi 4000 psi -
    Total Steering Angle 80° 70° -
    Steering Cycle Times - Low Idle 4.9 s - -
    Steering Cycle Times - High Idle 3.1 s - -
    Maximum Flow at 1,400 rpm - 52 gal/min -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
    Ambient Capability, Hydraulically Driven Demand Fan - High 131 °F - -

    Sound Performance - Standard
    Note Machine Sound Level (ISO 6396:2008) - 116 dB(A)
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		-
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -

    Sound Performance - Suppression
    Note Machine Sound Level (ISO 6396:2008) - 113 dB(A)
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		-
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks 17 ft - -
    Ground to Top of ROPS 18.3 ft - -
    Ground to Top of Hood 13.1 ft - -
    Ground to Center of Front Axle 4.3 ft - -
    Ground to Bumper Clearance 3.8 ft - -
    Ground to Lower Hitch Clearance 2.2 ft - -
    Reach - Maximum Lift 8.2 ft - -
    Clearance at Maximum Lift 15.2 ft - -
    B-Pin Height - Maximum Lift 22.8 ft - -
    Maximum Overall Height - Bucket Raised 30.8 ft - -
    Rear Axle - Centerline to Bumper 13.5 ft - -
    Tread Width 10.83 ft - -
    Rack Back Angle - Maximum Lift 56.9 degrees - -
    Dump Angle at Maximum Lift -49.5 degrees - -
    Rack Back Angle - Ground Level 40.2 degrees - -
    Width - Over Tires - With Bulge 14.74 ft - -
    Rack Back Angle - Carry 48.9 degrees - -
    Wheel Base 19.3 ft - -
    Maximum Overall Length 50.8 ft - -
    Front Axle Centerline to Bucket Tip 18 ft - -

    Dimensions - High Lift - Approximate
    Tread Width 10.83 ft - -
    Rack Back Angle - Ground Level 42.5 degrees - -
    Dump Angle at Maximum Lift -48.1 degrees - -
    Rack Back Angle - Maximum Lift 56.2 degrees - -
    Width - Over Tires - With Bulge 14.75 ft - -
    Rack Back Angle - Carry 51.6 degrees - -
    Ground to Top of Exhaust Stacks 17 ft - -
    Ground to Top of ROPS 18.3 ft - -
    Ground to Top of Hood 13.1 ft - -
    Ground to Center of Front Axle 4.3 ft - -
    Ground to Bumper Clearance 3.8 ft - -
    Ground to Lower Hitch Clearance 2.2 ft - -
    Reach - Maximum Lift 7.6 ft - -
    Clearance at Maximum Lift 17.2 ft - -
    B-Pin Height - Maximum Lift 24.5 ft - -
    Maximum Overall Height - Bucket Raised 32 ft - -
    Rear Axle - Centerline to Bumper 13.5 ft - -
    Wheel Base 19.3 ft - -
    Maximum Overall Length 51.6 ft - -
    Front Axle Centerline to Bucket Tip 18.8 ft - -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach - Maximum Lift - 7.1 ft -
    Clearance at Maximum Lift - 10.1 ft -
    B-Pin Height - Maximum Lift - 16.1 ft -
    Maximum Overall Height - Bucket Raised - 22.4 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 36.6 ft -
    Front Axle Centerline to Bucket Tip - 13.8 ft -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach - Maximum Lift - 7.4 ft -
    Clearance at Maximum Lift - 11.6 ft -
    B-Pin Height - Maximum Lift - 17.6 ft -
    Maximum Overall Height - Bucket Raised - 23.9 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 38 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach at Maximum Lift - 8 ft -
    Clearance at Maximum Lift - 10.7 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Maximum Overall Height, Bucket Raised - 20.9 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35 ft -
    Front Axle Centerline to Bucket Tip - 12.2 ft -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35.4 ft -
    Front Axle Centerline to Bucket Tip - 12.6 ft -

    Weights
    Operating Weight - - 66877 lb
    Note - - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

    Bucket Capacities
    Bucket Range - - 4.0-14.5 m³ 5.25-19 yd³

    Sound
    Note (1) - - ** For machines in European Union countries and in countries that adopt the �EU Directives.�
    Note (2) - - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - 109
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - 112 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - 78
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)

    Hydraulic System
    Implement System - Maximum Operating Pressure - - 4975 psi
    Implement System - Maximum Pump Output at 2,250 rpm - - 119 gal/min

    Dimensions
    Note - - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.9 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 1.5 ft
    Height - Top of Exhaust Pipe - - 12.5 ft
    Height - Top of Hood - - 10.1 ft
    Height - Top of ROPS - - 12.7 ft
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 15.7 ft
    Lift Arm Clearance at Maximum Lift - - 13.6 ft
    Overall Length - Without Bucket - - 27.5 ft
    Tread Width - - 8 ft
    Wheel Base - - 12.6 ft
    Rack Back at Ground - - 40 degrees
    Width over Tires (Loaded) - - 10.9 ft
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 456 mm
    Height - Top of Exhaust Pipe - - 3764 mm
    Height - Top of Hood - - 3064 mm
    Height - Top of ROPS - - 3829 mm
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 4554 mm
    Lift Arm Clearance at Maximum Lift - - 3881 mm
    Overall Length - Without Bucket - - 8155 mm
    Tread Width - - 8 ft
    Wheel Base - - 3800 mm
    Rack Back at Ground - - 40 degrees
    Centerline of Rear Axle to Edge of Counterweight - - 2661 mm
    Width over Tires (Loaded) - - 10.9 ft
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees
    Add a Similar Product: