Compare

Compare Equipment Go Back

Engine
	992 Wheel Loader View Product	982 XE View Product Remove	986 Wheel Loader View Product Remove
Net Power	814 HP	-	-
Engine Model	Cat® C32B	Cat C13	C15 Cat®
Emissions	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	-	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Rated Speed	1750 rpm	-	2000
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	900 HP	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	937 HP	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	907 HP	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	944 HP	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	884 HP	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	921 HP	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	893 HP	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	931 HP	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	814 HP	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	814 HP	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	823 HP	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	823 HP	-	-
Bore	5.7 in	-	5.4 in
Stroke	6.4 in	-	6.75 in
Displacement	1963.5 in³	12.5L	927 in²
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	3514 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	3555 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	3537 ft·lbf	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	3570 ft·lbf	-	-
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011	-	404 HP	-
Note (1)	-	Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.	-
Note (2)	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.	-
Engine Power @ 1,700 rpm – ISO 14396:2002	-	432 HP	-
Gross Torque @ 1,200 rpm – SAE J1995:2014	-	1636 lb/ft	-
Gross Power @ 1,700 rpm – SAE J1995:2014	-	436 HP	-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011	-	1515 lb/ft	-
Engine Torque @ 1,200 rpm – ISO 14396:2002	-	1620 lb/ft	-
Note (3)	-	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h	-
Peak Power Speed	-	-	1600
Peak Power Speed - Gross - SAE J1995	-	-	456 HP
Engine Power - ISO 14396	-	-	449 HP
Net Power - SAE J1349	-	-	373 HP
Rated Speed - 2,000 rpm - EEC 80/1269	-	-	373 HP
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)	-	-	378 HP
Rated Speed - 2,000 rpm - ISO 9249	-	-	373 HP
Rated Speed - 2,000 rpm - ISO 9249 (DIN)	-	-	378 HP
Peak Torque - 1,200 rpm - SAE J1995	-	-	1778 lb/ft
Torque Rise	-	-	16%
Operating Specifications
Operating Weight	233430 lb	-	-
Rated Payload - Standard	25.5 ton (US)	-	-
Rated Payload - Standard (Material Handler)	30 ton (US)	-	-
Rated Payload - High Lift	22.5 ton (US)	-	-
Rated Payload - High Lift (Material Handler)	27 ton (US)	-	-
Bucket Capacity Range	11.5-24.5 m³ (15-32 yd³)	-	5-10,3 m³ (6,5-13,5 yd.³)
Cat Truck Match - Standard	775/777	-	770/735/740/745
Cat Truck Match - High Lift	785	-	772/773
Breakout Force	-	59060 lbf	-
Note (1)	-	For a machine configuration as defined under Weight.	-
Note (2)	-	Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-
Static Tipping Load - Full 40° Turn - No Tire Deflection	-	22418 kg	-
Static Tipping Load - Full 40° Turn - With Tire Deflection	-	46526 lb	-
Operating Weight - Standard	-	-	97785 lb
Operating Weight - High Lift	-	-	104005 lb
Rated Payload - Standard (Quarry Face)	-	-	11 ton (US)
Rated Payload - Loose Material (Standard)	-	-	14 ton (US)
Rated Payload - High Lift (Quarry Face)	-	-	11 ton (US)
Rated Payload - Loose Material (High Lift)	-	-	12.1 ton (US)
Buckets
Bucket Capacities	11.5-24.5 m³ (15-32 yd³)	-	-
Transmission
Transmission Type	Cat Planetary Powershift	-	Cat planetary power shift
Forward - 1	4.3 mile/h	3.9 mile/h	5 mile/h
Forward - 2	7.4 mile/h	7.3 mile/h	8 mile/h
Forward - 3	12.7 mile/h	13 mile/h	-
Direct Drive - Forward 1	Disabled	-	-
Direct Drive - Forward 2	8 mile/h	-	8 mile/h
Direct Drive - Forward 3	14 mile/h	-	14 mile/h
Reverse - 1	4.7 mile/h	4.4 mile/h	5 mile/h
Reverse - 2	8.1 mile/h	8.4 mile/h	8 mile/h
Reverse - 3	13.9 mile/h	17.4 mile/h	-
Direct Drive - Reverse 1	5 mile/h	-	-
Direct Drive - Reverse 2	8.8 mile/h	-	9 mile/h
Direct Drive - Reverse 3	15.3 mile/h	-	16 mile/h
Forward - 4	-	24.5 mile/h	-
Note	-	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.	-
Direct Drive - Forward 4	-	-	24 mile/h
Direct Drive - Reverse 4	-	-	25.4 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Positive Flow Control	-	Load Sense
Lift/Tilt System - Pump	Variable Displacement Piston	-	2 × 110 cc variable displacement
Maximum Flow at 2,165 rpm	250 gal/min	-	123 gal/min
Relief Valve Setting - Lift/Tilt	5000 psi	-	4050 psi
Lift Cylinder - Bore	9.3 in	-	7.5 in
Lift Cylinder - Stroke	63.5 in	-	45 in
Tilt Cylinder - Bore	11.5 in	-	6.7 in
Tilt Cylinder - Stroke	41.5 in	-	28.4 in
Hydraulic Cycle Times
Rack Back	2.3 s	-	4.5 s
Rack Back - High Lift	2.3 s	-	-
Raise	9 s	-	9 s
Raise - High Lift	9 s	-	-
Dump	2.6 s	-	3.5 s
Dump - High Lift	2.6 s	-	-
Float Down	3.2 s	-	-
Float Down - High Lift	3.2 s	-	-
Total Hydraulic Cycle Time	17.1 s	-	21.3 s
Lower	-	-	5.2 s
Lower Float Down	-	-	4.3 s
Service Refill Capacities
Fuel Tank	385.7 gal (US)	112.5 gal (US)	141 gal (US)
Cooling Systems	59.4 gal (US)	-	26 gal (US)
Crankcase	31.7 gal (US)	9.8 gal (US)	9 gal (US)
Transmission	51.5 gal (US)	20.3 gal (US)	20 gal (US)
Differential - Final Drives - Front	96.4 gal (US)	24.3 gal (US)	-
Differential - Final Drives - Rear	96.4 gal (US)	24.3 gal (US)	-
Hydraulic System Factory Fill (Implement)	104.1 gal (US)	-	-
Hydraulic Tank - Implement	60.2 gal (US)	-	-
Hydraulic Factory Fill (Steering)	32.5 gal (US)	-	-
Hydraulic Tank (Steering Tank Only)	26.3 gal (US)	-	-
Cooling System	-	13.7 gal (US)	-
DEF Tank	-	5.5 gal (US)	-
Hydraulic Tank	-	40.4 gal (US)	-
Fuel Tank - Short Lift	-	-	127 gal (US)
Diesel Exhaust Fluid Tank	-	-	6 gal (US)
Axle Oil - Differentials and Final Drives - Front	-	-	49 gal (US)
Axle Oil - Differentials and Final Drives - Rear	-	-	45 gal (US)
Hydraulic System Factory Fill	-	-	87 gal (US)
Hydraulic System - Tank Only	-	-	34 gal (US)
Axles
Front	Fixed	-	Fixed
Rear	Trunnion	-	Trunnion
Oscillation Angle	±9°	-	±12.5°
Oscillation Angle - Chain Arrangement	-	-	±8.5°
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011
Hydraulic System - Steering
Steering System - Circuit	Pilot, Load Sensing	-	Load Sense
Steering System - Pump	Piston, Variable Displacement	-	Piston, variable displacement
Maximum Flow at 1,400-1,850 rpm	70 gal/min	-	-
Steering Cut Off Pressure	4500 psi	-	4000 psi
Total Steering Angle	80°	-	70°
Steering Cycle Times - Low Idle	4.9 s	-	-
Steering Cycle Times - High Idle	3.1 s	-	-
Maximum Flow at 1,400 rpm	-	-	52 gal/min
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	109.4 °F	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	131 °F	-	-
Sound Performance - Standard
Note	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be neede
Operator Sound Level (ISO 6396)	-	-	72 dB(A)
Machine Sound Level (ISO 6395)	-	-	112 dB(A)
Sound Performance - Suppression
Note	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be neede
Operator Sound Level (ISO 6396)	-	-	72 dB(A)
Machine Sound Level (ISO 6395)	-	-	110 dB(A)
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	17 ft	-	-
Ground to Top of ROPS	18.3 ft	-	-
Ground to Top of Hood	13.1 ft	-	-
Ground to Center of Front Axle	4.3 ft	-	-
Ground to Bumper Clearance	3.8 ft	-	-
Ground to Lower Hitch Clearance	2.2 ft	-	-
Reach - Maximum Lift	8.2 ft	-	-
Clearance at Maximum Lift	15.2 ft	-	-
B-Pin Height - Maximum Lift	22.8 ft	-	-
Maximum Overall Height - Bucket Raised	30.8 ft	-	-
Rear Axle - Centerline to Bumper	13.5 ft	-	-
Tread Width	10.83 ft	-	-
Rack Back Angle - Maximum Lift	56.9 degrees	-	-
Dump Angle at Maximum Lift	-49.5 degrees	-	-
Rack Back Angle - Ground Level	40.2 degrees	-	-
Width - Over Tires - With Bulge	14.74 ft	-	-
Rack Back Angle - Carry	48.9 degrees	-	-
Wheel Base	19.3 ft	-	-
Maximum Overall Length	50.8 ft	-	-
Front Axle Centerline to Bucket Tip	18 ft	-	-
Dimensions - High Lift - Approximate
Tread Width	10.83 ft	-	-
Rack Back Angle - Ground Level	42.5 degrees	-	-
Dump Angle at Maximum Lift	-48.1 degrees	-	-
Rack Back Angle - Maximum Lift	56.2 degrees	-	-
Width - Over Tires - With Bulge	14.75 ft	-	-
Rack Back Angle - Carry	51.6 degrees	-	-
Ground to Top of Exhaust Stacks	17 ft	-	-
Ground to Top of ROPS	18.3 ft	-	-
Ground to Top of Hood	13.1 ft	-	-
Ground to Center of Front Axle	4.3 ft	-	-
Ground to Bumper Clearance	3.8 ft	-	-
Ground to Lower Hitch Clearance	2.2 ft	-	-
Reach - Maximum Lift	7.6 ft	-	-
Clearance at Maximum Lift	17.2 ft	-	-
B-Pin Height - Maximum Lift	24.5 ft	-	-
Maximum Overall Height - Bucket Raised	32 ft	-	-
Rear Axle - Centerline to Bumper	13.5 ft	-	-
Wheel Base	19.3 ft	-	-
Maximum Overall Length	51.6 ft	-	-
Front Axle Centerline to Bucket Tip	18.8 ft	-	-
Weights
Operating Weight	-	78264 lb	-
Note	-	Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun	-
Bucket Capacities
Bucket Range	-	4.8-17.2 m³ 6.25-22.5 yd³	-
Sound
Note (1)	-	* For machines in European Union countries and in countries that adopt the “EU Directives.”	-
Note (2)	-	European Union Directive “2000/14/EC” as amended by “2005/88/EC.”	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*	-	107	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	70 dB(A)	-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)	-	110 dB(A)	-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)	-	75	-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)	-	70 dB(A)	-
Air Conditioning System
Air Conditioning	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Hydraulic System
Implement System - Maximum Operating Pressure	-	4975 psi	-
Implement System - Maximum Pump Output at 2,250 rpm	-	119 gal/min	-
Hydraulic Cycle Time - Total	-	10.1 seconds	-
Dimensions
Note	-	All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.	-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight	-	9.4 ft	-
Centerline of Rear Axle to Hitch	-	6.3 ft	-
Ground Clearance	-	1.4 ft	-
Height - Top of Exhaust Pipe	-	12.4 ft	-
Height - Top of Hood	-	10 ft	-
Height - Top of ROPS	-	12.6 ft	-
Hinge Pin Height at Carry	-	2.11 ft	-
Hinge Pin Height at Maximum Lift	-	16.1 ft	-
Lift Arm Clearance at Maximum Lift	-	13.4 ft	-
Overall Length - Without Bucket	-	29.11 ft	-
Tread Width	-	8.4 ft	-
Wheel Base	-	12.6 ft	-
Width over Tires (Loaded)	-	11.5 ft	-
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight	-	8.95 ft	-
Centerline of Rear Axle to Hitch	-	6.3 ft	-
Ground Clearance	-	428 mm	-
Height - Top of Exhaust Pipe	-	3736 mm	-
Height - Top of Hood	-	3036 mm	-
Height - Top of ROPS	-	3801 mm	-
Hinge Pin Height at Carry	-	2.7 ft	-
Hinge Pin Height at Maximum Lift	-	4741 mm	-
Lift Arm Clearance at Maximum Lift	-	3902 mm	-
Overall Length - Without Bucket	-	8597 mm	-
Tread Width	-	8.4 ft	-
Wheel Base	-	3800 mm	-
Width over Tires (Loaded)	-	11.5 ft	-
Operator's Cab
ROPS/FOPS	-	-	ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	13.3 ft
Ground to Top of Hood	-	-	10.7 ft
Ground to Center of Front Axle	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	1.5 ft
Reach - Maximum Lift	-	-	7.1 ft
Clearance at Maximum Lift	-	-	10.1 ft
B-Pin Height - Maximum Lift	-	-	16.1 ft
Maximum Overall Height - Bucket Raised	-	-	22.4 ft
Rear Axle - Centerline to Bumper	-	-	10.3 ft
Wheel Base	-	-	12.5 ft
Maximum Overall Length	-	-	36.6 ft
Front Axle Centerline to Bucket Tip	-	-	13.8 ft
Note	-	-	All dimensions are approximate. Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	13.3 ft
Ground to Top of Hood	-	-	10.7 ft
Ground to Center of Front Axle	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	1.5 ft
Reach - Maximum Lift	-	-	7.4 ft
Clearance at Maximum Lift	-	-	11.6 ft
B-Pin Height - Maximum Lift	-	-	17.6 ft
Maximum Overall Height - Bucket Raised	-	-	23.9 ft
Rear Axle - Centerline to Bumper	-	-	10.3 ft
Wheel Base	-	-	12.5 ft
Maximum Overall Length	-	-	38 ft
Front Axle Centerline to Bucket Tip	-	-	15.3 ft
Note	-	-	All dimensions are approximate. Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
Ground to Top of ROPS	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	13.3 ft
Ground to Top of Hood	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	1.5 ft
Reach at Maximum Lift	-	-	8 ft
Clearance at Maximum Lift	-	-	10.7 ft
B-Pin Height at Maximum Lift	-	-	15 ft
Maximum Overall Height, Bucket Raised	-	-	20.9 ft
Rear Axle Center Line to Bumper	-	-	10.3 ft
Wheel Base	-	-	12.5 ft
Maximum Overall Length	-	-	35 ft
Front Axle Centerline to Bucket Tip	-	-	12.2 ft
Dimensions (Approximate) - Quick Coupler and Fork
Ground to Top of ROPS	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	13.3 ft
Ground to Top of Hood	-	-	10.7 ft
Ground to Center of Rear Axle	-	-	3.2 ft
Ground to Fuel Tank Clearance	-	-	2.3 ft
Ground to Lower Hitch Clearance	-	-	1.5 ft
B-Pin Height at Maximum Lift	-	-	15 ft
Rear Axle Center Line to Bumper	-	-	10.3 ft
Wheel Base	-	-	12.5 ft
Maximum Overall Length	-	-	35.4 ft
Front Axle Centerline to Bucket Tip	-	-	12.6 ft

Compare Equipment Go Back

992 Wheel Loader

982 XE

986 Wheel Loader

Engine

Operating Specifications

Buckets

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Service Refill Capacities

Axles

Brakes

Hydraulic System - Steering

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Bucket Capacities

Sound

Air Conditioning System

Hydraulic System

Dimensions

Dimensions - High Lift

Dimensions - Standard Lift

Operator's Cab

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket

Dimensions (Approximate) - Quick Coupler and Fork

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us