Compare

Compare Equipment Go Back

Engine
	992 Wheel Loader View Product	980 View Product Remove	988 GC Wheel Loader View Product Remove	995 Wheel Loader View Product Remove
Net Power	814 HP	-	-	-
Engine Model	Cat® C32B	Cat C13	Cat® C15	Cat® 3516E
Emissions	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent	-	U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
Rated Speed	1750 rpm	-	2000	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	900 HP	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	937 HP	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	907 HP	-	-	-
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	944 HP	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	884 HP	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	921 HP	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	893 HP	-	-	-
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	931 HP	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	814 HP	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	814 HP	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	823 HP	-	-	-
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	823 HP	-	-	-
Bore	5.7 in	-	5.4 in	6.7 in
Stroke	6.4 in	-	6.75 in	8.5 in
Displacement	1963.5 in³	12.5 L	927 in³	4766 in³
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	3514 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	3555 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	3537 ft·lbf	-	-	-
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	3570 ft·lbf	-	-	-
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011	-	393 HP	-	-
Note (1)	-	Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.	-	The power ratings apply when tested under the reference conditions for the specified standard.
Note (2)	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
Gross Torque @ 1,200 rpm – SAE J1995:2014	-	1627 lb/ft	-	-
Engine Torque @ 1,200 rpm – ISO 14396:2002	-	1612 lb/ft	-	-
Gross Power @ 1,700 rpm – SAE J1995:2014	-	425 HP	-	-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011	-	1539 lb/ft	-	-
Engine Power @ 1,700 rpm – ISO 14396:2002	-	429 HP	-	-
Note (3)	-	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h	-	The gross power advertised is with the fan at maximum speed.
Peak Power Speed	-	-	1600	-
Engine Power - ISO 14396	-	-	449 HP	1847 HP
Gross Power - SAE J1995	-	-	456 HP	1870 HP
Net Power - SAE J1349	-	-	373 HP	-
Peak Torque - 1,200 rpm - SAE J1995	-	-	1778 ft·lbf	8549 lb/ft
Torque Rise	-	-	16%	39%
Net Power - SAE J1349 - Standard Ambient	-	-	-	1739 HP
Net Power - SAE J1349 - High Ambient	-	-	-	1696 HP
Operating Specifications
Operating Weight	233430 lb	-	116858 lb	-
Rated Payload - Standard	25.5 ton (US)	-	-	-
Rated Payload - Standard (Material Handler)	30 ton (US)	-	-	-
Rated Payload - High Lift	22.5 ton (US)	-	-	-
Rated Payload - High Lift (Material Handler)	27 ton (US)	-	-	-
Bucket Capacity Range	11.5-24.5 m³ (15-32 yd³)	-	6.4-7.6 m3 (8.3-10 yd3)	17.2-43.6 m3 (22.3-57 yd3)
Cat Truck Match - Standard	775/777	-	-	785/789
Cat Truck Match - High Lift	785	-	772/773/775	789/793/794
Breakout Force	-	51008 lb	-	-
Note (1)	-	For a machine configuration as defined under �Weight.�	-	-
Note (2)	-	Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.	-	-
Static Tipping Load - Full 40° Turn - No Tire Deflection	-	20965 kg	-	-
Static Tipping Load - Full 40° Turn - With Tire Deflection	-	43432 lb	-	-
Rated Payload - Quarry Face	-	-	12.5 ton (US)	-
Operating Weight - Standard	-	-	-	543772 lb
Operating Weight - High Lift	-	-	-	547675 lb
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	-	-	60 ton (US)
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	-	-	50 ton (US)
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	-	-	55 ton (US)
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	-	-	50 ton (US)
Note	-	-	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
Buckets
Bucket Capacities	11.5-24.5 m³ (15-32 yd³)	-	6.4-7.6 m3 (8.3-10 yd3)	-
Transmission
Transmission Type	Cat Planetary Powershift	-	Cat planetary power shift	Cat Planetary Power Shift
Forward - 1	4.3 mile/h	4.3 mile/h	5 mile/h	4.6 mile/h
Forward - 2	7.4 mile/h	8.3 mile/h	8 mile/h	8 mile/h
Forward - 3	12.7 mile/h	14.6 mile/h	-	13.6 mile/h
Direct Drive - Forward 1	Disabled	-	Lock-up disabled	Lock-up disables
Direct Drive - Forward 2	8 mile/h	-	8 mile/h	8.7 mile/h
Direct Drive - Forward 3	14 mile/h	-	14 mile/h	15.2 mile/h
Reverse - 1	4.7 mile/h	4.8 mile/h	5 mile/h	5 mile/h
Reverse - 2	8.1 mile/h	9.4 mile/h	8 mile/h	8.8 mile/h
Reverse - 3	13.9 mile/h	16.7 mile/h	-	14.9 mile/h
Direct Drive - Reverse 1	5 mile/h	-	Lock-up disabled	Lock-up disables
Direct Drive - Reverse 2	8.8 mile/h	-	9 mile/h	9.6 mile/h
Direct Drive - Reverse 3	15.3 mile/h	-	16 mile/h	16.8 mile/h
Forward - 4	-	24.5 mile/h	-	-
Note	-	Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.	-	Travel speeds based on 58/85-57 tires.
Reverse - 4	-	24.5 mile/h	-	-
Direct Drive - Forward 4	-	-	24 mile/h	-
Direct Drive - Reverse 4	-	-	25.4 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Positive Flow Control	-	EH - Load Sense	Positive Flow Control
Lift/Tilt System - Pump	Variable Displacement Piston	-	-	Variable Displacement Piston
Maximum Flow at 2,165 rpm	250 gal/min	-	159 gal/min	-
Relief Valve Setting - Lift/Tilt	5000 psi	-	4598 psi	5004 psi
Lift Cylinder - Bore	9.3 in	-	-	-
Lift Cylinder - Stroke	63.5 in	-	-	-
Tilt Cylinder - Bore	11.5 in	-	-	-
Tilt Cylinder - Stroke	41.5 in	-	27 in	-
Lift/Tilt System	-	-	2X x 145 cc Variable displacement piston	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	-	190 mm x 1216 mm (7.5 in x 48 in)	370 × 1713 mm (14.6 × 67.4 in)
Cylinders, Double Acting - Tilt, Bore and Stroke	-	-	170 mm x 722 mm (6.7 in x 28.4 in)	310 × 1086 mm (12.2 × 42.8 in)
Pilot System	-	-	Variable displacement piston	Open Loop and Pressure Reducing
Maximum Flow at 1,700 rpm Engine Speed	-	-	-	541 gal/min
Hydraulic Cycle Times
Rack Back	2.3 s	-	3.8 s	4.9 s
Rack Back - High Lift	2.3 s	-	-	-
Raise	9 s	-	7.5 s	12.6 s
Raise - High Lift	9 s	-	-	-
Dump	2.6 s	-	3 s	3.1 s
Dump - High Lift	2.6 s	-	-	-
Float Down	3.2 s	-	-	-
Float Down - High Lift	3.2 s	-	-	-
Total Hydraulic Cycle Time	17.1 s	-	-	-
Lower Float Down	-	-	4.6 s	4.2 s
Total Hydraulic Cycle Time - Empty Bucket	-	-	18.9 s	-
Service Refill Capacities
Fuel Tank	385.7 gal (US)	112.5 gal (US)	141 gal (US)	-
Cooling Systems	59.4 gal (US)	-	-	-
Crankcase	31.7 gal (US)	9.8 gal (US)	-	-
Transmission	51.5 gal (US)	20.3 gal (US)	20 gal (US)	-
Differential - Final Drives - Front	96.4 gal (US)	22.2 gal (US)	49 gal (US)	-
Differential - Final Drives - Rear	96.4 gal (US)	22.4 gal (US)	45 gal (US)	-
Hydraulic System Factory Fill (Implement)	104.1 gal (US)	-	-	-
Hydraulic Tank - Implement	60.2 gal (US)	-	-	-
Hydraulic Factory Fill (Steering)	32.5 gal (US)	-	-	-
Hydraulic Tank (Steering Tank Only)	26.3 gal (US)	-	-	-
Cooling System	-	13.7 gal (US)	27 gal (US)	-
DEF Tank	-	5.5 gal (US)	-	-
Hydraulic Tank	-	40.4 gal (US)	-	-
Engine Crankcase	-	-	9 gal (US)	-
Diesel Exhaust Fluid Tank	-	-	5.5 gal (US)	-
Note	-	-	Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a	-
Axles
Front	Fixed	-	Fixed	Fixed
Rear	Trunnion	-	Trunnion	Trunnion
Oscillation Angle	±9°	-	+/-12.5°	9°
Brakes
Brakes	ISO 3450:2011	-	ISO 3450:2011	ISO 3450:2011
Hydraulic System - Steering
Steering System - Circuit	Pilot, Load Sensing	-	Pilot, load sensing	Pilot, Load Sensing
Steering System - Pump	Piston, Variable Displacement	-	Piston, variable displacement	Piston, Variable Displacement
Maximum Flow at 1,400-1,850 rpm	70 gal/min	-	-	-
Steering Cut Off Pressure	4500 psi	-	-	-
Total Steering Angle	80°	-	70°	80 degrees
Steering Cycle Times - Low Idle	4.9 s	-	5.2 s	7.6 s
Steering Cycle Times - High Idle	3.1 s	-	3 s	4.3 s
Maximum Flow	-	-	52 gal (US)	-
Relief Valve Setting - Steering	-	-	4000 psi	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	109.4 °F	-	-	109.4 °F
Ambient Capability, Hydraulically Driven Demand Fan - High	131 °F	-	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	-	-	131 °F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	-	-	127.4 °F
Sound Performance - Standard
Note	Machine Sound Level (ISO 6396:2008) - 116 dB(A)	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	74 dB(A)
Machine Sound Level (ISO 6395:2008)	-	-	-	119 dB(A)
Sound Performance - Suppression
Note	Machine Sound Level (ISO 6396:2008) - 113 dB(A)	-	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	-	-	73 dB(A)
Machine Sound Level (ISO 6395:2008)	-	-	-	117 dB(A)
Dimensions - Standard Lift - Approximate
Ground to Top of Exhaust Stacks	17 ft	-	-	23.2 ft
Ground to Top of ROPS	18.3 ft	-	-	23.4 ft
Ground to Top of Hood	13.1 ft	-	-	18.6 ft
Ground to Center of Front Axle	4.3 ft	-	-	-
Ground to Bumper Clearance	3.8 ft	-	-	4.4 ft
Ground to Lower Hitch Clearance	2.2 ft	-	-	2.9 ft
Reach - Maximum Lift	8.2 ft	-	-	9.6 ft
Clearance at Maximum Lift	15.2 ft	-	-	19.8 ft
B-Pin Height - Maximum Lift	22.8 ft	-	-	28.8 ft
Maximum Overall Height - Bucket Raised	30.8 ft	-	-	39.3 ft
Rear Axle - Centerline to Bumper	13.5 ft	-	-	20.4 ft
Tread Width	10.83 ft	-	-	14.1 ft
Rack Back Angle - Maximum Lift	56.9 degrees	-	-	-
Dump Angle at Maximum Lift	-49.5 degrees	-	-	–50.0 degrees
Rack Back Angle - Ground Level	40.2 degrees	-	-	39.7 degrees
Width - Over Tires - With Bulge	14.74 ft	-	-	18.8 ft
Rack Back Angle - Carry	48.9 degrees	-	-	47.7 degrees
Wheel Base	19.3 ft	-	-	22.3 ft
Maximum Overall Length	50.8 ft	-	-	64.6 ft
Front Axle Centerline to Bucket Tip	18 ft	-	-	21.9 ft
Ground to Center of Axles	-	-	-	6 ft
Note	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift	-	-	-	59.5 degrees
Dimensions - High Lift - Approximate
Tread Width	10.83 ft	-	-	14.1 ft
Rack Back Angle - Ground Level	42.5 degrees	-	-	45 degrees
Dump Angle at Maximum Lift	-48.1 degrees	-	-	–50.0 degrees
Rack Back Angle - Maximum Lift	56.2 degrees	-	-	-
Width - Over Tires - With Bulge	14.75 ft	-	-	18.8 ft
Rack Back Angle - Carry	51.6 degrees	-	-	53.5 degrees
Ground to Top of Exhaust Stacks	17 ft	-	-	23.2 ft
Ground to Top of ROPS	18.3 ft	-	-	23.4 ft
Ground to Top of Hood	13.1 ft	-	-	18.6 ft
Ground to Center of Front Axle	4.3 ft	-	-	-
Ground to Bumper Clearance	3.8 ft	-	-	4.4 ft
Ground to Lower Hitch Clearance	2.2 ft	-	-	2.9 ft
Reach - Maximum Lift	7.6 ft	-	-	9.4 ft
Clearance at Maximum Lift	17.2 ft	-	-	22.6 ft
B-Pin Height - Maximum Lift	24.5 ft	-	-	31.6 ft
Maximum Overall Height - Bucket Raised	32 ft	-	-	42.1 ft
Rear Axle - Centerline to Bumper	13.5 ft	-	-	20.4 ft
Wheel Base	19.3 ft	-	-	22.3 ft
Maximum Overall Length	51.6 ft	-	-	66.9 ft
Front Axle Centerline to Bucket Tip	18.8 ft	-	-	24.2 ft
Ground to Center of Axles	-	-	-	6 ft
Note	-	-	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift	-	-	-	59.4 degrees
Weights
Operating Weight	-	66877 lb	-	-
Note	-	Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s	-	-
Bucket Capacities
Bucket Range	-	4.0-14.5 m³ 5.25-19 yd³	-	-
Sound
Note (1)	-	** For machines in European Union countries and in countries that adopt the �EU Directives.�	-	-
Note (2)	-	***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�	-	-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*	-	109	-	-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	-	72 dB(A)	-	-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)	-	112 dB(A)	-	-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)	-	78	-	-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)	-	72 dB(A)	-	-
Air Conditioning System
Air Conditioning	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	-
Hydraulic System
Implement System - Maximum Operating Pressure	-	4975 psi	-	-
Implement System - Maximum Pump Output at 2,250 rpm	-	119 gal/min	-	-
Dimensions
Note	-	All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.	-	-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight	-	8.9 ft	-	-
Centerline of Rear Axle to Hitch	-	6.3 ft	-	-
Ground Clearance	-	1.5 ft	-	-
Height - Top of Exhaust Pipe	-	12.5 ft	-	-
Height - Top of Hood	-	10.1 ft	-	-
Height - Top of ROPS	-	12.7 ft	-	-
Hinge Pin Height at Carry	-	2.2 ft	-	-
Hinge Pin Height at Maximum Lift	-	15.7 ft	-	-
Lift Arm Clearance at Maximum Lift	-	13.6 ft	-	-
Overall Length - Without Bucket	-	27.5 ft	-	-
Tread Width	-	8 ft	-	-
Wheel Base	-	12.6 ft	-	-
Rack Back at Ground	-	40 degrees	-	-
Width over Tires (Loaded)	-	10.9 ft	-	-
Rack Back - Carry Height	-	50 degrees	-	-
Rack Back - Maximum Lift	-	61 degrees	-	-
Dimensions - Standard Lift
Centerline of Rear Axle to Hitch	-	6.3 ft	-	-
Ground Clearance	-	456 mm	-	-
Height - Top of Exhaust Pipe	-	3764 mm	-	-
Height - Top of Hood	-	3064 mm	-	-
Height - Top of ROPS	-	3829 mm	-	-
Hinge Pin Height at Carry	-	2.2 ft	-	-
Hinge Pin Height at Maximum Lift	-	4554 mm	-	-
Lift Arm Clearance at Maximum Lift	-	3881 mm	-	-
Overall Length - Without Bucket	-	8155 mm	-	-
Tread Width	-	8 ft	-	-
Wheel Base	-	3800 mm	-	-
Rack Back at Ground	-	40 degrees	-	-
Centerline of Rear Axle to Edge of Counterweight	-	2661 mm	-	-
Width over Tires (Loaded)	-	10.9 ft	-	-
Rack Back - Carry Height	-	50 degrees	-	-
Rack Back - Maximum Lift	-	61 degrees	-	-
Operator's Cab
ROPS/FOPS	-	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)	-	-	72 dB(A)	-
Machine Sound Level (ISO 6395)	-	-	110 dB(A)	-
Note (1)	-	-	The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Note (2)	-	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-
Note (3)	-	-	The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS	-	-	13.5 ft	-
Ground to Top of Exhaust Stacks	-	-	13.3 ft	-
Ground to Top of Hood	-	-	10.7 ft	-
Rear Axle - Centerline to Bumper	-	-	10.3 ft	-
Front Axle Centerline to Bucket Tip	-	-	15.7 ft	-
Wheel Base	-	-	12.5 ft	-
Maximum Overall Length	-	-	39.5 ft	-
Ground to Lower Hitch Clearance	-	-	1.5 ft	-
Clearance at Maximum Lift	-	-	12 ft	-
B-Pin Height - Maximum Lift	-	-	18.7 ft	-
Maximum Overall Height - Bucket Raised	-	-	25 ft	-
Reach - Maximum Lift	-	-	7.7 ft	-
Note	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.	-
Sustainability
Recyclability	-	-	96%	-
Complete System Fill
Fuel Tank - Standard	-	-	-	856 gal (US)
Fuel Tank - With 24 hr Attachment	-	-	-	1414 gal (US)
Cooling System	-	-	-	138 gal (US)
Engine Crankcase	-	-	-	76 gal (US)
Transmission	-	-	-	110 gal (US)
Differential - Final Drives - Front	-	-	-	220 gal (US)
Differential - Final Drives - Rear	-	-	-	200 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan	-	-	-	270 gal (US)
Hydraulic Tank - Steering and Braking	-	-	-	100 gal (US)
Oil Renewal System (ORS)*	-	-	-	20 gal (US)
Note	-	-	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.

Compare Equipment Go Back

992 Wheel Loader

980

988 GC Wheel Loader

995 Wheel Loader

Engine

Operating Specifications

Buckets

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Service Refill Capacities

Axles

Brakes

Hydraulic System - Steering

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Bucket Capacities

Sound

Air Conditioning System

Hydraulic System

Dimensions

Dimensions - High Lift

Dimensions - Standard Lift

Operator's Cab

Sound Performance - Tier 4 Final/EU Stage V - Standard

Dimensions (Approximate) - High Lift

Sustainability

Complete System Fill

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us