CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    950 GC Wheel Loader | Front Loader
    View Product
    995 Wheel Loader
    View Product Remove
    980
    View Product Remove

    Engine
    Net Power - ISO 9249 225 HP - -
    Emissions Tier 4/Stage V U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent -
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.995 tons). - -
    Bore 4.13 in 6.7 in -
    Stroke 5.31 in 8.5 in -
    Displacement 428 in³ 4766 in³ 12.5 L
    Maximum Net Power - 1,700 rpm - ISO 9249 - Metric 228 HP - -
    Maximum Power - 1,700 rpm - ISO 14396 240 HP - -
    Maximum Power - 1,700 rpm - ISO 14396 - Metric 243 HP - -
    Peak Gross Torque - 1,400 rpm - SAE J1995 811 ft·lbf - -
    Peak Gross Torque - 1,400 rpm - ISO 14396 805 ft·lbf - -
    Engine Model Cat C7.1 Cat® 3516E Cat C13
    Maximum Net Power - 1,700 rpm - ISO 9249 225 HP - -
    Maximum Net Power - 1,700 rpm - SAE J1349 225 HP - -
    Maximum Power - 1,700 rpm - SAE J1995 241 HP - -
    Engine Power - ISO 14396 - 1847 HP -
    Gross Power - SAE J1995 - 1870 HP -
    Net Power - SAE J1349 - Standard Ambient - 1739 HP -
    Net Power - SAE J1349 - High Ambient - 1696 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - 8549 lb/ft -
    Torque Rise - 39% -
    Note (1) - The power ratings apply when tested under the reference conditions for the specified standard. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Note (3) - The gross power advertised is with the fan at maximum speed. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 393 HP
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - 1627 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - 1612 lb/ft
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 425 HP
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1539 lb/ft
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 429 HP

    Weights
    Operating Weight 41554 lb - 66877 lb
    Note - - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

    Buckets
    Bucket Capacities 2.9-4.4 m³ (3.75-5.75 yd³) - -

    Sound
    With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 76 dB(A)* - -
    Note (1) *Distance of 15 m (49.2 ft), moving forward in second gear ratio. - ** For machines in European Union countries and in countries that adopt the �EU Directives.�
    With Cooling Fan Speed at 70% of Maximum Value: Note (2) European Union Directive "2000/14/EC" as amended by "2005/88/EC." - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 73 dB(A) - -
    With Cooling Fan Speed at 70% of Maximum Value: Note (1) For machines in European Union countries and in countries that adopt the EU Directives - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 107 LWA*** - -
    Note (3) ***European Union Directive "2000/14/EC" as amended by "2005/88/EC." - -
    Note (2) **For machines in European Union countries and in countries that adopt the "EU Directives." - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
    With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 73 dB(A) - -
    With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A) - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - 109
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - 112 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - 78
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)

    Dimensions
    Rack Back - Ground 40 degrees - -
    Height - Top of Exhaust Pipe 11.17 ft - -
    Centerline of Rear Axle to Hitch 5.42 ft - -
    Lift Arm Clearance 12 ft - -
    B-Pin Height 13.75 ft - -
    Centerline of Rear Axle to Edge of Counterweight 6.75 ft - -
    Ground Clearance 1.5 ft - -
    Rack Back - Maximum Lift 60 degrees - -
    Height - Top of Hood 8.75 ft - -
    Wheel Base 10.83 ft - -
    Height - Top of ROPS 11.33 ft - -
    Rack Back - Carry 45 degrees - -
    Note All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires. - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Weights and Operating Specifications
    Note (2) *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Tipping Load - Full Turn - Rigid Tires** 25875 lb - -
    Breakout Force 34638 lbf - -
    Tipping Load - Full Turn - ISO 14397-1* 24264 lb - -
    Note (3) **Compliance to ISO (2007) 14397-1 Sections 1 thru 5. - -
    Operating Weight 41554 lb - -
    Note (1) For 3.1 m3 (4.0 yd3) general purpose buckets with BOCE. Weight based on a machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, secondary steering, sound - -

    Transmission
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 760 mm (30 in) roll radius. Travel speeds based on 58/85-57 tires. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
    Reverse - 3 14.2 mile/h 14.9 mile/h 16.7 mile/h
    Forward - 3 14.2 mile/h 13.6 mile/h 14.6 mile/h
    Forward - 1 4.5 mile/h 4.6 mile/h 4.3 mile/h
    Forward - 2 8 mile/h 8 mile/h 8.3 mile/h
    Forward - 4 22.4 mile/h - 24.5 mile/h
    Reverse - 2 8 mile/h 8.8 mile/h 9.4 mile/h
    Reverse - 1 4.5 mile/h 5 mile/h 4.8 mile/h
    Transmission Type - Cat Planetary Power Shift -
    Direct Drive - Forward 1 - Lock-up disables -
    Direct Drive - Forward 2 - 8.7 mile/h -
    Direct Drive - Forward 3 - 15.2 mile/h -
    Direct Drive - Reverse 1 - Lock-up disables -
    Direct Drive - Reverse 2 - 9.6 mile/h -
    Direct Drive - Reverse 3 - 16.8 mile/h -
    Reverse - 4 - - 24.5 mile/h

    Hydraulic System
    Hydraulic Cycle Time - Total Cycle Time 9.4 s - -
    Steering System - Pump Type Piston - -
    Implement System - Maximum Operating Pressure @ 50 ± 1.5 L/min (13.2 + 0.4 gal/min) 4047 psi - -
    Implement System - Maximum Pump Output at 2,390 rpm 68 gal/min - -
    Implement System - Maximum Operating Pressure - - 4975 psi
    Implement System - Maximum Pump Output at 2,250 rpm - - 119 gal/min

    Service Refill Capacities
    DEF Tank 4.2 gal (US) - 5.5 gal (US)
    Transmission 11.9 gal (US) - 20.3 gal (US)
    Fuel Tank Size 76.6 gal (US) - -
    Cooling System 13.2 gal (US) - 13.7 gal (US)
    Differential - Final Drives - Rear 10 gal (US) - 22.4 gal (US)
    Differential - Final Drives - Front 10.6 gal (US) - 22.2 gal (US)
    Crankcase 4.8 gal (US) - 9.8 gal (US)
    Hydraulic Tank 29.6 gal (US) - 40.4 gal (US)
    Fuel Tank - - 112.5 gal (US)

    Engine - Tier 4 Final/Stage IV
    Emissions Tier 4/Stage IV - -

    Operating Specifications
    Operating Weight - Standard - 543772 lb -
    Bucket Capacity Range - 17.2-43.6 m3 (22.3-57 yd3) -
    Operating Weight - High Lift - 547675 lb -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - 60 ton (US) -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - 50 ton (US) -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - 55 ton (US) -
    Rated Payload - High Lift (Moderate to High Digging Resistance) - 50 ton (US) -
    Note - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. -
    Cat Truck Match - Standard - 785/789 -
    Cat Truck Match - High Lift - 789/793/794 -
    Breakout Force - - 51008 lb
    Note (1) - - For a machine configuration as defined under �Weight.�
    Note (2) - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - 20965 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - 43432 lb

    Complete System Fill
    Fuel Tank - Standard - 856 gal (US) -
    Fuel Tank - With 24 hr Attachment - 1414 gal (US) -
    Cooling System - 138 gal (US) -
    Engine Crankcase - 76 gal (US) -
    Transmission - 110 gal (US) -
    Differential - Final Drives - Front - 220 gal (US) -
    Differential - Final Drives - Rear - 200 gal (US) -
    Hydraulic Tank - Implement and Hydraulic Fan - 270 gal (US) -
    Hydraulic Tank - Steering and Braking - 100 gal (US) -
    Oil Renewal System (ORS)* - 20 gal (US) -
    Note - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. -

    Axles
    Front - Fixed -
    Rear - Trunnion -
    Oscillation Angle - 9° -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - 131 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - 127.4 °F -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 74 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 119 dB(A) -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - 73 dB(A) -
    Machine Sound Level (ISO 6395:2008) - 117 dB(A) -
    Note - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing -
    Steering System - Pump - Piston, Variable Displacement -
    Total Steering Angle - 80 degrees -
    Steering Cycle Times - Low Idle - 7.6 s -
    Steering Cycle Times - High Idle - 4.3 s -

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - 28.8 ft -
    Clearance at Maximum Lift - 19.8 ft -
    Dump Angle at Maximum Lift - –50.0 degrees -
    Front Axle Centerline to Bucket Tip - 21.9 ft -
    Ground to Bumper Clearance - 4.4 ft -
    Ground to Center of Axles - 6 ft -
    Ground to Lower Hitch Clearance - 2.9 ft -
    Ground to Top of Exhaust Stacks - 23.2 ft -
    Ground to Top of Hood - 18.6 ft -
    Ground to Top of ROPS - 23.4 ft -
    Maximum Overall Height - Bucket Raised - 39.3 ft -
    Maximum Overall Length - 64.6 ft -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
    Rack Angle at Maximum Lift - 59.5 degrees -
    Rack Back Angle - Carry - 47.7 degrees -
    Rack Back Angle - Ground Level - 39.7 degrees -
    Reach - Maximum Lift - 9.6 ft -
    Rear Axle - Centerline to Bumper - 20.4 ft -
    Tread Width - 14.1 ft -
    Wheel Base - 22.3 ft -
    Width - Over Tires - With Bulge - 18.8 ft -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - 31.6 ft -
    Clearance at Maximum Lift - 22.6 ft -
    Dump Angle at Maximum Lift - –50.0 degrees -
    Front Axle Centerline to Bucket Tip - 24.2 ft -
    Ground to Bumper Clearance - 4.4 ft -
    Ground to Center of Axles - 6 ft -
    Ground to Lower Hitch Clearance - 2.9 ft -
    Ground to Top of Exhaust Stacks - 23.2 ft -
    Ground to Top of Hood - 18.6 ft -
    Ground to Top of ROPS - 23.4 ft -
    Maximum Overall Height - Bucket Raised - 42.1 ft -
    Maximum Overall Length - 66.9 ft -
    Note - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
    Rack Angle at Maximum Lift - 59.4 degrees -
    Rack Back Angle - Carry - 53.5 degrees -
    Rack Back Angle - Ground Level - 45 degrees -
    Reach - Maximum Lift - 9.4 ft -
    Rear Axle - Centerline to Bumper - 20.4 ft -
    Tread Width - 14.1 ft -
    Wheel Base - 22.3 ft -
    Width - Over Tires - With Bulge - 18.8 ft -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control -
    Lift/Tilt System - Pump - Variable Displacement Piston -
    Maximum Flow at 1,700 rpm Engine Speed - 541 gal/min -
    Relief Valve Setting - Lift/Tilt - 5004 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 370 × 1713 mm (14.6 × 67.4 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 310 × 1086 mm (12.2 × 42.8 in) -
    Pilot System - Open Loop and Pressure Reducing -

    Hydraulic Cycle Times
    Rack Back - 4.9 s -
    Raise - 12.6 s -
    Dump - 3.1 s -
    Lower Float Down - 4.2 s -

    Brakes
    Brakes - ISO 3450:2011 -

    Bucket Capacities
    Bucket Range - - 4.0-14.5 m³ 5.25-19 yd³

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.9 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 1.5 ft
    Height - Top of Exhaust Pipe - - 12.5 ft
    Height - Top of Hood - - 10.1 ft
    Height - Top of ROPS - - 12.7 ft
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 15.7 ft
    Lift Arm Clearance at Maximum Lift - - 13.6 ft
    Overall Length - Without Bucket - - 27.5 ft
    Tread Width - - 8 ft
    Wheel Base - - 12.6 ft
    Rack Back at Ground - - 40 degrees
    Width over Tires (Loaded) - - 10.9 ft
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 456 mm
    Height - Top of Exhaust Pipe - - 3764 mm
    Height - Top of Hood - - 3064 mm
    Height - Top of ROPS - - 3829 mm
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 4554 mm
    Lift Arm Clearance at Maximum Lift - - 3881 mm
    Overall Length - Without Bucket - - 8155 mm
    Tread Width - - 8 ft
    Wheel Base - - 3800 mm
    Rack Back at Ground - - 40 degrees
    Centerline of Rear Axle to Edge of Counterweight - - 2661 mm
    Width over Tires (Loaded) - - 10.9 ft
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees
    Add a Similar Product: