|
938M Waste Handler Small Wheel Loader
|
|
|
Engine |
Maximum Gross Power |
188 HP |
- |
- |
Bore |
4 in |
6.7 in |
- |
Stroke |
5 in |
8.5 in |
- |
Displacement |
427 in³ |
4766 in³ |
12.5L |
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) |
1800 r/min |
- |
- |
Note (2) |
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) |
649 ft·lbf |
- |
- |
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) |
664 ft·lbf |
- |
- |
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) |
1600 r/min |
- |
- |
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) |
173 HP |
- |
- |
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) |
642 ft·lbf |
- |
- |
Engine Model |
Cat® C7.1 |
Cat® 3516E |
Cat C13 |
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) |
627 ft·lbf |
- |
- |
Note (3) |
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
The gross power advertised is with the fan at maximum speed. |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) |
188 HP |
- |
- |
Emissions |
The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards. |
U.S. EPA Tier 4 Final/EU Stage V or
U.S. EPA Tier 1 equivalent |
- |
Note (1) |
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
The power ratings apply when tested under the reference conditions for the specified standard. |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) |
650 ft·lbf |
- |
- |
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) |
628 ft·lbf |
- |
- |
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
186 HP |
- |
- |
Engine Power - ISO 14396 |
188 HP |
1847 HP |
- |
Engine Power - ISO 14396 - Metric |
190 HP |
- |
- |
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) |
190 HP |
- |
- |
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
184 HP |
- |
- |
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
183 HP |
- |
- |
Net Power (Standard Power Mode: Range 1-3*) |
1600 r/min |
- |
- |
Net Power (Performance Power Mode: Range 1-4) |
1800 r/min |
- |
- |
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) |
176 HP |
- |
- |
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
170 HP |
- |
- |
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
170 HP |
- |
- |
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
172 HP |
- |
- |
Gross Power - SAE J1995 |
- |
1870 HP |
- |
Net Power - SAE J1349 - Standard Ambient |
- |
1739 HP |
- |
Net Power - SAE J1349 - High Ambient |
- |
1696 HP |
- |
Peak Torque - 1,200 rpm - SAE J1995 |
- |
8549 lb/ft |
- |
Torque Rise |
- |
39% |
- |
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
- |
404 HP |
Engine Power @ 1,700 rpm – ISO 14396:2002 |
- |
- |
432 HP |
Gross Torque @ 1,200 rpm – SAE J1995:2014 |
- |
- |
1636 lb/ft |
Gross Power @ 1,700 rpm – SAE J1995:2014 |
- |
- |
436 HP |
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
- |
1515 lb/ft |
Engine Torque @ 1,200 rpm – ISO 14396:2002 |
- |
- |
1620 lb/ft |
Weights |
Operating Weight |
41794 lb |
- |
78264 lb |
Operating Weight (1) |
17 258 kg (38,046 lb)** |
- |
- |
Operating Weight (2) |
18 958 kg (41,794 lb)^ |
- |
- |
Note (2) |
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. |
- |
- |
Note (1) |
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. |
- |
- |
Note |
- |
- |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun |
Buckets |
Bucket Capacities |
3.0-5.0 m3 (3.9-6.5 yd3) |
- |
- |
Cab |
ROPS |
ISO 3471:2008 |
- |
- |
FOPS |
ISO 3449:2005 LEVEL II |
- |
- |
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* |
101 dB(A) |
- |
- |
Note (1) |
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl |
- |
- |
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* |
68 dB(A) |
- |
- |
Operating Specifications |
Note (1) |
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires. |
- |
For a machine configuration as defined under Weight. |
Full Turn Tip Load (1) |
9795 kg (21,594 lb)** |
- |
- |
Note (2) |
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires. |
- |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Full Turn Tip Load (2) |
10 741 kg (23,679 lb)^ |
- |
- |
Operating Weight - Standard |
- |
543772 lb |
- |
Bucket Capacity Range |
- |
17.2-43.6 m3 (22.3-57 yd3) |
- |
Operating Weight - High Lift |
- |
547675 lb |
- |
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) |
- |
60 ton (US) |
- |
Rated Payload - Standard Lift (Moderate to High Digging Resistance) |
- |
50 ton (US) |
- |
Rated Payload - High Lift (Low to Moderate Digging Resistance) |
- |
55 ton (US) |
- |
Rated Payload - High Lift (Moderate to High Digging Resistance) |
- |
50 ton (US) |
- |
Note |
- |
*Please contact your local dealer to determine if your application is suitable for this increased rated payload. |
- |
Cat Truck Match - Standard |
- |
785/789 |
- |
Cat Truck Match - High Lift |
- |
789/793/794 |
- |
Breakout Force |
- |
- |
59060 lbf |
Static Tipping Load - Full 40° Turn - No Tire Deflection |
- |
- |
22418 kg |
Static Tipping Load - Full 40° Turn - With Tire Deflection |
- |
- |
46526 lb |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
Loader Hydraulic System |
Maximum Flow - Implement Pump - 4th Function Maximum Flow* |
42 gal/min |
- |
- |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure |
4351 psi |
- |
- |
Relief Pressure - Tilt Cylinder |
4351 psi |
- |
- |
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure |
4061 psi |
- |
- |
Note (1) |
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. |
- |
- |
Maximum Flow - Implement Pump |
50 gal/min |
- |
- |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) |
5.5/6.2 seconds |
- |
- |
Note (2) |
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
- |
- |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time |
9.7/10.6 seconds |
- |
- |
Maximum Working Pressure - Implement Pump |
4061 psi |
- |
- |
Note (3) |
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped. |
- |
- |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) |
2.7/2.7 seconds |
- |
- |
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) |
1.5/1.7 seconds |
- |
- |
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* |
50 gal/min |
- |
- |
Lift Cylinder: Standard Lift Linkage - Stroke |
31.1 in |
- |
- |
Tilt Cylinder: Standard Lift Linkage - Rod Diameter |
3.5 in |
- |
- |
Lift Cylinder: Standard Lift Linkage - Rod Diameter |
2.6 in |
- |
- |
Tilt Cylinder: Standard Lift Linkage - Bore Diameter |
5.9 in |
- |
- |
Lift Cylinder: Standard Lift Linkage - Bore Diameter |
4.7 in |
- |
- |
Tilt Cylinder: Standard Lift Linkage - Stroke |
21.9 in |
- |
- |
Steering |
Maximum Steering Torque - 0° (Straight Machine) |
42506 ft·lbf |
- |
- |
Maximum Steering Torque - 40° (Full Turn) |
31398 ft·lbf |
- |
- |
Maximum Working Pressure - Steering Pump |
3500 psi |
- |
- |
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed |
2.3 s |
- |
- |
Steering Cylinder, Double Acting - Bore Diameter |
3.1 in |
- |
- |
Steering Cylinder, Double Acting - Stroke |
15.7 in |
- |
- |
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited |
3.1 s |
- |
- |
Note (1) |
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. |
- |
- |
Steering Cylinder, Double Acting - Rod Diameter |
2 in |
- |
- |
Maximum Flow - Steering Pump |
34 gal/min |
- |
- |
Note (2) |
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). |
- |
- |
Transmission |
Forward and Reverse - Range 2 |
8 mile/h |
- |
- |
Forward and Reverse - Range 4 |
25 mile/h |
- |
- |
Note |
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph). |
Travel speeds based on 58/85-57 tires. |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
Forward and Reverse - Range 3 |
17 mile/h |
- |
- |
Forward and Reverse - Range 1* |
1-13 km/h (0.6-8 mph) |
- |
- |
Transmission Type |
- |
Cat Planetary Power Shift |
- |
Forward - 1 |
- |
4.6 mile/h |
3.9 mile/h |
Forward - 2 |
- |
8 mile/h |
7.3 mile/h |
Forward - 3 |
- |
13.6 mile/h |
13 mile/h |
Reverse - 1 |
- |
5 mile/h |
4.4 mile/h |
Reverse - 2 |
- |
8.8 mile/h |
8.4 mile/h |
Reverse - 3 |
- |
14.9 mile/h |
17.4 mile/h |
Direct Drive - Forward 1 |
- |
Lock-up disables |
- |
Direct Drive - Forward 2 |
- |
8.7 mile/h |
- |
Direct Drive - Forward 3 |
- |
15.2 mile/h |
- |
Direct Drive - Reverse 1 |
- |
Lock-up disables |
- |
Direct Drive - Reverse 2 |
- |
9.6 mile/h |
- |
Direct Drive - Reverse 3 |
- |
16.8 mile/h |
- |
Forward - 4 |
- |
- |
24.5 mile/h |
Power Train |
Front Axle - Traction Aid |
Locking differential |
- |
- |
Note (1) |
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. |
- |
- |
Rear Axle |
Oscillating |
- |
- |
Note (3) |
Differential front locking axle can be engaged on the go at full torque up to 20 km/h (12.4 mph) on the 938M. |
- |
- |
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 |
± 10.5 degrees |
- |
- |
Rear Axle - Traction Aid - Optional |
Limited slip differential |
- |
- |
Rear Axle - Oscillation Angle by Tire Size - 23.5 R25 |
± 7 degrees |
- |
- |
Brakes - Service |
Inboard wet disc |
- |
- |
Note (2) |
Offset rims available to meet European roading requirements. |
- |
- |
Brakes - Parking |
Spring applied hydraulically released |
- |
- |
Front Axle |
Fixed |
- |
- |
Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder |
± 7 degrees |
- |
- |
Sustainability |
Recyclability |
94% |
- |
- |
Service Refill Capacities |
Axles - Rear |
9.2 gal (US) |
- |
- |
Fuel Tank |
51.5 gal (US) |
- |
112.5 gal (US) |
Axles - Front |
9.2 gal (US) |
- |
- |
Transmission - Gear Box |
2.9 gal (US) |
- |
- |
Hydraulic System - Including Tank |
44.9 gal (US) |
- |
- |
Engine Crankcase |
5.3 gal (US) |
- |
- |
Diesel Exhaust Fluid (DEF) Tank |
5 gal (US) |
- |
- |
Cooling System |
8.5 gal (US) |
- |
13.7 gal (US) |
Hydraulic Tank |
23.8 gal (US) |
- |
40.4 gal (US) |
Crankcase |
- |
- |
9.8 gal (US) |
DEF Tank |
- |
- |
5.5 gal (US) |
Differential - Final Drives - Front |
- |
- |
24.3 gal (US) |
Differential - Final Drives - Rear |
- |
- |
24.3 gal (US) |
Transmission |
- |
- |
20.3 gal (US) |
Complete System Fill |
Fuel Tank - Standard |
- |
856 gal (US) |
- |
Fuel Tank - With 24 hr Attachment |
- |
1414 gal (US) |
- |
Cooling System |
- |
138 gal (US) |
- |
Engine Crankcase |
- |
76 gal (US) |
- |
Transmission |
- |
110 gal (US) |
- |
Differential - Final Drives - Front |
- |
220 gal (US) |
- |
Differential - Final Drives - Rear |
- |
200 gal (US) |
- |
Hydraulic Tank - Implement and Hydraulic Fan |
- |
270 gal (US) |
- |
Hydraulic Tank - Steering and Braking |
- |
100 gal (US) |
- |
Oil Renewal System (ORS)* |
- |
20 gal (US) |
- |
Note |
- |
*Not available on Tier 4 Final/Stage V machines. Not available in all regions. |
- |
Axles |
Front |
- |
Fixed |
- |
Rear |
- |
Trunnion |
- |
Oscillation Angle |
- |
9° |
- |
Cooling System |
Ambient Capability Hydraulically Driven Demand Fan - Standard |
- |
109.4 °F |
- |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) |
- |
131 °F |
- |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) |
- |
127.4 °F |
- |
Sound Performance - Standard |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
- |
74 dB(A) |
- |
Machine Sound Level (ISO 6395:2008) |
- |
119 dB(A) |
- |
Note |
- |
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
- |
Sound Performance - Suppression |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
- |
73 dB(A) |
- |
Machine Sound Level (ISO 6395:2008) |
- |
117 dB(A) |
- |
Note |
- |
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
Pilot, Load Sensing |
- |
Steering System - Pump |
- |
Piston, Variable Displacement |
- |
Total Steering Angle |
- |
80 degrees |
- |
Steering Cycle Times - Low Idle |
- |
7.6 s |
- |
Steering Cycle Times - High Idle |
- |
4.3 s |
- |
Dimensions - Standard Lift - Approximate |
B-Pin Height - Maximum Lift |
- |
28.8 ft |
- |
Clearance at Maximum Lift |
- |
19.8 ft |
- |
Dump Angle at Maximum Lift |
- |
–50.0 degrees |
- |
Front Axle Centerline to Bucket Tip |
- |
21.9 ft |
- |
Ground to Bumper Clearance |
- |
4.4 ft |
- |
Ground to Center of Axles |
- |
6 ft |
- |
Ground to Lower Hitch Clearance |
- |
2.9 ft |
- |
Ground to Top of Exhaust Stacks |
- |
23.2 ft |
- |
Ground to Top of Hood |
- |
18.6 ft |
- |
Ground to Top of ROPS |
- |
23.4 ft |
- |
Maximum Overall Height - Bucket Raised |
- |
39.3 ft |
- |
Maximum Overall Length |
- |
64.6 ft |
- |
Note |
- |
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
- |
Rack Angle at Maximum Lift |
- |
59.5 degrees |
- |
Rack Back Angle - Carry |
- |
47.7 degrees |
- |
Rack Back Angle - Ground Level |
- |
39.7 degrees |
- |
Reach - Maximum Lift |
- |
9.6 ft |
- |
Rear Axle - Centerline to Bumper |
- |
20.4 ft |
- |
Tread Width |
- |
14.1 ft |
- |
Wheel Base |
- |
22.3 ft |
- |
Width - Over Tires - With Bulge |
- |
18.8 ft |
- |
Dimensions - High Lift - Approximate |
B-Pin Height - Maximum Lift |
- |
31.6 ft |
- |
Clearance at Maximum Lift |
- |
22.6 ft |
- |
Dump Angle at Maximum Lift |
- |
–50.0 degrees |
- |
Front Axle Centerline to Bucket Tip |
- |
24.2 ft |
- |
Ground to Bumper Clearance |
- |
4.4 ft |
- |
Ground to Center of Axles |
- |
6 ft |
- |
Ground to Lower Hitch Clearance |
- |
2.9 ft |
- |
Ground to Top of Exhaust Stacks |
- |
23.2 ft |
- |
Ground to Top of Hood |
- |
18.6 ft |
- |
Ground to Top of ROPS |
- |
23.4 ft |
- |
Maximum Overall Height - Bucket Raised |
- |
42.1 ft |
- |
Maximum Overall Length |
- |
66.9 ft |
- |
Note |
- |
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
- |
Rack Angle at Maximum Lift |
- |
59.4 degrees |
- |
Rack Back Angle - Carry |
- |
53.5 degrees |
- |
Rack Back Angle - Ground Level |
- |
45 degrees |
- |
Reach - Maximum Lift |
- |
9.4 ft |
- |
Rear Axle - Centerline to Bumper |
- |
20.4 ft |
- |
Tread Width |
- |
14.1 ft |
- |
Wheel Base |
- |
22.3 ft |
- |
Width - Over Tires - With Bulge |
- |
18.8 ft |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
Positive Flow Control |
- |
Lift/Tilt System - Pump |
- |
Variable Displacement Piston |
- |
Maximum Flow at 1,700 rpm Engine Speed |
- |
541 gal/min |
- |
Relief Valve Setting - Lift/Tilt |
- |
5004 psi |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
370 × 1713 mm (14.6 × 67.4 in) |
- |
Cylinders, Double Acting - Tilt, Bore and Stroke |
- |
310 × 1086 mm (12.2 × 42.8 in) |
- |
Pilot System |
- |
Open Loop and Pressure Reducing |
- |
Hydraulic Cycle Times |
Rack Back |
- |
4.9 s |
- |
Raise |
- |
12.6 s |
- |
Dump |
- |
3.1 s |
- |
Lower Float Down |
- |
4.2 s |
- |
Brakes |
Brakes |
- |
ISO 3450:2011 |
- |
Bucket Capacities |
Bucket Range |
- |
- |
4.8-17.2 m³ 6.25-22.5 yd³ |
Sound |
Note (1) |
- |
- |
* For machines in European Union countries and in countries that adopt the “EU Directives.” |
Note (2) |
- |
- |
European Union Directive “2000/14/EC” as amended by “2005/88/EC.” |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
- |
- |
107 |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
- |
- |
70 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
- |
- |
110 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
- |
- |
75 |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
- |
- |
70 dB(A) |
Hydraulic System |
Implement System - Maximum Operating Pressure |
- |
- |
4975 psi |
Implement System - Maximum Pump Output at 2,250 rpm |
- |
- |
119 gal/min |
Hydraulic Cycle Time - Total |
- |
- |
10.1 seconds |
Dimensions |
Note |
- |
- |
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
Dimensions - High Lift |
Centerline of Rear Axle to Edge of Counterweight |
- |
- |
9.4 ft |
Centerline of Rear Axle to Hitch |
- |
- |
6.3 ft |
Ground Clearance |
- |
- |
1.4 ft |
Height - Top of Exhaust Pipe |
- |
- |
12.4 ft |
Height - Top of Hood |
- |
- |
10 ft |
Height - Top of ROPS |
- |
- |
12.6 ft |
Hinge Pin Height at Carry |
- |
- |
2.11 ft |
Hinge Pin Height at Maximum Lift |
- |
- |
16.1 ft |
Lift Arm Clearance at Maximum Lift |
- |
- |
13.4 ft |
Overall Length - Without Bucket |
- |
- |
29.11 ft |
Tread Width |
- |
- |
8.4 ft |
Wheel Base |
- |
- |
12.6 ft |
Width over Tires (Loaded) |
- |
- |
11.5 ft |
Dimensions - Standard Lift |
Centerline of Rear Axle to Edge of Counterweight |
- |
- |
8.95 ft |
Centerline of Rear Axle to Hitch |
- |
- |
6.3 ft |
Ground Clearance |
- |
- |
428 mm |
Height - Top of Exhaust Pipe |
- |
- |
3736 mm |
Height - Top of Hood |
- |
- |
3036 mm |
Height - Top of ROPS |
- |
- |
3801 mm |
Hinge Pin Height at Carry |
- |
- |
2.7 ft |
Hinge Pin Height at Maximum Lift |
- |
- |
4741 mm |
Lift Arm Clearance at Maximum Lift |
- |
- |
3902 mm |
Overall Length - Without Bucket |
- |
- |
8597 mm |
Tread Width |
- |
- |
8.4 ft |
Wheel Base |
- |
- |
3800 mm |
Width over Tires (Loaded) |
- |
- |
11.5 ft |