Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)
170 HP
-
-
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 HP
-
-
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 HP
-
-
Engine Power - ISO 14396 - Metric
170 HP
-
-
Engine Power - ISO 14396
168 HP
-
-
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)
162 HP
-
-
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 HP
-
-
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
-
-
Net Power (Standard Power Mode: Range 1-3*)
1600 r/min
-
-
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
-
-
Net Power (Performance Power Mode: Range 1-4)
1800 r/min
-
-
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP
-
-
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
-
-
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
-
-
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min
-
-
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
586 ft·lbf
-
-
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP
-
-
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
588 ft·lbf
-
-
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
573 ft·lbf
-
-
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.
-
-
Engine Model
Cat® C7.1
Cat C13
-
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
-
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
572 ft·lbf
-
-
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
587 ft·lbf
-
-
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 HP
-
-
Weights
Operating Weight
37713 lb
78264 lb
-
Note (2)
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
-
-
Note (1)
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
-
-
Operating Weight (1)
15 381 kg (33,908 lb)**
-
-
Operating Weight (2)
17 107 kg (37,713 lb)^
-
-
Note
-
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
Buckets
Bucket Capacities
3.0-5.0 m3 (3.9-6.5 yd3)
-
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005 LEVEL II
-
-
Note (1)
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl
-
-
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A)
-
-
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A)
-
-
Loader Hydraulic System
Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in
-
-
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.9 in
-
-
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.7 in
-
-
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.6 in
-
-
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
3.5 in
-
-
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in
-
-
Maximum Flow - Implement Pump
50 gal/min
-
-
Maximum Working Pressure - Implement Pump
3771 psi
-
-
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
-
-
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi
-
-
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
-
-
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
-
-
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
-
-
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
-
-
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
-
-
Note (3)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
-
-
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi
-
-
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
-
-
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min
-
-
Relief Pressure - Tilt Cylinder
4061 psi
-
-
Service Refill Capacities
Axles - Front
6.9 gal (US)
-
-
Cooling System
7.9 gal (US)
13.7 gal (US)
-
Engine Crankcase
5.3 gal (US)
-
-
Hydraulic Tank
23.8 gal (US)
40.4 gal (US)
-
Transmission - Gear Box
2.2 gal (US)
-
-
Fuel Tank
51.5 gal (US)
112.5 gal (US)
-
Hydraulic System - Including Tank
43.6 gal (US)
-
-
Axles - Rear
6.6 gal (US)
-
-
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
-
-
Crankcase
-
9.8 gal (US)
-
DEF Tank
-
5.5 gal (US)
-
Differential - Final Drives - Front
-
24.3 gal (US)
-
Differential - Final Drives - Rear
-
24.3 gal (US)
-
Transmission
-
20.3 gal (US)
-
Operating Specifications
Note (2)
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
Note (1)
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
For a machine configuration as defined under Weight.
-
Full Turn Tip Load (2)
9525 kg (20,998 lb)^
-
-
Full Turn Tip Load (1)
8573 kg (18,900 lb)**
-
-
Breakout Force
-
59060 lbf
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
-
22418 lb
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
-
Steering
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
-
-
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
-
-
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf
-
-
Steering Cylinder, Double Acting - Stroke
17.2 in
-
-
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
-
-
Maximum Working Pressure - Steering Pump
3500 psi
-
-
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
-
-
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf
-
-
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
-
-
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
-
-
Maximum Flow - Steering Pump
34 gal/min
-
-
Transmission
Forward and Reverse - Range 4
25 mile/h
-
-
Forward and Reverse - Range 3
17 mile/h
-
-
Forward and Reverse - Range 2
8 mile/h
-
-
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
* For machines in European Union countries and in countries that adopt the “EU Directives.”
-
Note (2)
-
European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
-
107
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
-
110 dB(A)
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
-
75
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
-
70 dB(A)
-
Hydraulic System
Implement System - Maximum Operating Pressure
-
4975 psi
-
Hydraulic Cycle Time - Total
-
10.1 seconds
-
Dimensions
Note
-
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.