Compare Equipment Go Back
 930M Ag Handler Small Wheel Loader |
 988 Wheel Loader |
 986 Wheel Loader |
|
Engine |
|||
|---|---|---|---|
| Maximum Gross Power | 168 hp | - | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf | - | - |
| Stroke - Performance Power Mode: Range 1-4 | 5.3 in | - | - |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) | 797 N·m | - | - |
| Displacement (Performance Power Mode: Speed Range 1-4) | 428 in³ | - | - |
| Emissions | Engine meets U.S. EPA Tier 4 Final emission standards. | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II | U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA |
| Engine Model | Cat® C7.1 | Cat® C18 ™ | C15 Cat® |
| Note (4) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | - | - |
| Maximum Rated Gross Power - ISO 14396 | 168 hp | - | - |
| Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) | 170 hp | - | - |
| Note (2) | **Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | - | - |
| Note (3) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | - | - |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | 168 hp | - | - |
| Note (1) | *The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards. | - | - |
| Bore (Standard Power Mode: Range 1-4) | 4.1 in | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | 156 hp | - | - |
| Stroke (Standard Power Mode: Range 1-3**) | 5.3 in | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | 156 hp | - | - |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**) | 1600 r/min | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 hp | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 hp | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**) | 158 hp | - | - |
| Bore (Standard Power Mode: Range 1-3**) | 4.1 in | - | - |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | 587 ft·lbf | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**) | 795 N·m | - | - |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**) | 776 N·m | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 hp | - | - |
| Displacement (Standard Power Mode: Range 1-3**) | 428 in³ | - | - |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**) | 160 hp | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**) | 162 hp | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**) | 573 ft·lbf | - | - |
| Maximum Rated Gross Power - ISO 14396 (metric) | 170 mhp | - | - |
| Net Power - SAE J1349:2011 | - | 538 hp | 373 hp |
| Engine Power - ISO 14396:2002 | - | 580 hp | 449 hp |
| Gross Power - SAE J1995:2014 | - | 588 hp | - |
| Rated Speed | - | 1700/min | 2000 |
| Peak Power Speed | - | 1500/rpm | 1600 |
| Bore | - | 5.7 in | 5.4 in |
| Stroke | - | 7.2 in | 6.75 in |
| Displacement | - | 1105 in³ | 927 in² |
| Peak Torque - 1,200 rpm | - | 2230 lb/ft | - |
| Torque Rise | - | 58 % | 16% |
| Peak Power Speed - Gross - SAE J1995 | - | - | 456 hp |
| Rated Speed - 2,000 rpm - EEC 80/1269 | - | - | 373 hp |
| Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) | - | - | 378 hp |
| Rated Speed - 2,000 rpm - ISO 9249 | - | - | 373 hp |
| Rated Speed - 2,000 rpm - ISO 9249 (DIN) | - | - | 378 hp |
| Peak Torque - 1,200 rpm - SAE J1995 | - | - | 1778 lb/ft |
Weights |
|||
| Operating Weight | 31382 lb | - | - |
Buckets |
|||
| Bucket Capacities | 2.1-5.0 m³ (2.7-6.5 yd³) | 4.7-13 m3 (6.2-17 yd3) | - |
| Bucket Capacities - Light Material | 3.1-5.0 m³ (4.0-6.5 yd³) | - | - |
Cab |
|||
| ROPS | ISO 3471:2008 | - | - |
| FOPS | ISO 3449:2005 Level II | - | - |
| Note (1) | *The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab | - | - |
| Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* | 101 dB(A) | - | - |
| Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* | 68 dB(A) | - | - |
Power Train |
|||
| Front Axle | Fixed | - | - |
| Front Axle - Traction Aid* | Locking differential standard | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25 | ± 10.5 degrees | - | - |
| Brakes - Service | Inboard wet disc | - | - |
| Rear Axle - Traction Aid | Limited slip differential optional | - | - |
| Brakes - Parking | Spring applied hydraulically released | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65 | ± 7 degrees | - | - |
| Note | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph). | - | - |
| Rear Axle | Oscillating | - | - |
| Note (2) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - | - |
Tires |
|||
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. | - | - |
| Other Choices Include | 20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX | - | - |
| Standard Size | 20.5 R25, radial (L-3) | - | - |
| Note (2) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. | - | - |
Transmission |
|||
| Reverse - Range 2 | 8 mile/h | - | - |
| Note | Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine | - | - |
| Forward - Range 3 | 17 mile/h | - | - |
| Forward - Range 4 | 25 mile/h | - | - |
| Reverse - Range 3 | 17 mile/h | - | - |
| Reverse - Range 1* | 8 mile/h | - | - |
| Forward - Range 2 | 8 mile/h | - | - |
| Forward - Range 1* | 1-13 km/h (0.6-8 mph) | - | - |
| Reverse - Range 4 | 25 mile/h | - | - |
| Transmission Type | - | Cat planetary powershift | Cat planetary power shift |
| Forward - 1 | - | 4 mile/h | 5 mile/h |
| Forward - 2 | - | 7.2 mile/h | 8 mile/h |
| Forward - 3 | - | 12.7 mile/h | - |
| Forward - 4 | - | 21.6 mile/h | - |
| Reverse - 1 | - | 4.7 mile/h | 5 mile/h |
| Reverse - 2 | - | 8.3 mile/h | 8 mile/h |
| Reverse - 3 | - | 14.4 mile/h | - |
| Direct Drive - Forward 1 | - | Lock-up disabled | - |
| Direct Drive - Forward 2 | - | 7.8 mile/h | 8 mile/h |
| Direct Drive - Forward 3 | - | 13.9 mile/h | 14 mile/h |
| Direct Drive - Forward 4 | - | 24.4 mile/h | 24 mile/h |
| Direct Drive - Reverse 1 | - | 5 mile/h | - |
| Direct Drive - Reverse 2 | - | 8.9 mile/h | 9 mile/h |
| Direct Drive - Reverse 3 | - | 15.8 mile/h | 16 mile/h |
| Direct Drive - Reverse 4 | - | - | 25.4 mile/h |
Loader Hydraulic System |
|||
| Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height) | 1.7 s | - | - |
| Maximum Working Pressure - Implement Pump | 4061 psi | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4351 psi | - | - |
| Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | - | - |
| Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift) | 5.7 s | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50 gal/min | - | - |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter | 4.3 in | - | - |
| Tilt Cylinder: Standard Lift Linkage - Stroke | 21.9 in | - | - |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter | 2.8 in | - | - |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter | 2.4 in | - | - |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter | 5.1 in | - | - |
| Lift Cylinder: Standard Lift Linkage - Stroke | 28.7 in | - | - |
| Relief Pressure - Tilt Cylinder | 4351 psi | - | - |
| Cycle Times - 1,600 rpm - Standard: Total Cycle Time | 10.1 s | - | - |
| Maximum Flow - Implement Pump | 50 gal/min | - | - |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42 gal/min | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height) | 1.5 s | - | - |
| Note | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display. | - | - |
| Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time | 9.3 s | - | - |
| Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level) | 2.7 s | - | - |
| Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift) | 5.1 s | - | - |
| Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level) | 2.7 s | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 4061 psi | - | - |
Steering |
|||
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 2.8 s | - | - |
| Steering Articulation Angle - Each Direction | 40° | - | - |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.4 s | - | - |
| Steering Cylinder, Double Acting - Rod Diameter | 1.6 in | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left | 3.5 turns | - | - |
| Maximum Flow - Steering Pump | 34 gal/min | - | - |
| Steering Cylinder, Double Acting - Bore Diameter | 2.8 in | - | - |
| Steering Cylinder, Double Acting - Stroke | 17.2 in | - | - |
| Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - | - |
| Maximum Working Pressure - Steering Pump | 3500 psi | - | - |
Service Refill Capacities |
|||
| Axles - Front | 6.9 gal (US) | - | - |
| Hydraulic Tank | 23.8 gal (US) | - | - |
| Transmission - Gear Box | 2.2 gal (US) | - | - |
| Cooling System | 7.9 gal (US) | 31.7 gal (US) | - |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Fuel Tank | 51.5 gal (US) | 188 gal (US) | 141 gal (US) |
| Axles - Rear | 6.6 gal (US) | - | - |
| Hydraulic System - Including Tank | 43.6 gal (US) | - | - |
| Engine Crankcase | 5.3 gal (US) | - | - |
| Coolant (Validated by Test Cell Fill Quantities) | - | 33 gal (US) | - |
| Crankcase | - | 15.9 gal (US) | 9 gal (US) |
| Diesel Exhaust Fluid Tank | - | 8.7 gal (US) | 6 gal (US) |
| Transmission | - | 31.7 gal (US) | 20 gal (US) |
| Transmission - Validated by Test Cell Fill Quantities | - | 29 gal (US) | - |
| Differential - Final Drives - Front | - | 49.1 gal (US) | - |
| Differential - Final Drives - Rear | - | 49.1 gal (US) | - |
| Hydraulic System Factory Fill | - | 125.5 gal (US) | 87 gal (US) |
| Hydraulic System - Tank Only | - | 63.4 gal (US) | 34 gal (US) |
| Fuel Tank - Short Lift | - | - | 127 gal (US) |
| Cooling Systems | - | - | 26 gal (US) |
| Axle Oil - Differentials and Final Drives - Front | - | - | 49 gal (US) |
| Axle Oil - Differentials and Final Drives - Rear | - | - | 45 gal (US) |
Axles |
|||
| Rear | Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) | Trunnion | Trunnion |
| Front | Fixed; Locking differential (standard) | Fixed | Fixed |
| Oscillation Angle | - | 13 ° | ±12.5° |
| Oscillation Angle - Chain Arrangement | - | - | ±8.5° |
Dimensions with Bucket - Standard Lift |
|||
| Height - Ground Clearance** | 1.3 ft | - | - |
| Rack Angle at Carry | 43 ° | - | - |
| Departure Angle | 33 ° | - | - |
| Length - Wheel Base | 9.8 ft | - | - |
| Length - Rear Axle to Bumper | 6.5 ft | - | - |
| Turning Radius - Over Bucket | 19.5 ft | - | - |
| Carry Height - Bucket Pin | 1.3 ft | - | - |
| Width - Over Tires | 8.3 ft | - | - |
| Note (2) | **Vary with tire. | - | - |
| Dig Depth** | 3.9 in | - | - |
| Turning Radius - Outside of Tires | 17.7 ft | - | - |
| Clearance - Level Bucket** | 11.75 ft | - | - |
| Clearance - Bucket at 45°* | 9.1 ft | - | - |
| Rack Angle at Full Lift | 54 ° | - | - |
| Height - Overall** | 17.1 ft | - | - |
| Width - Bucket | 8.4 ft | - | - |
| Height - Ground to Axle Center** | 2.25 ft | - | - |
| Height - Bucket Pin** | 12.8 ft | - | - |
| Operating Weight | 31125 lb | - | - |
| Width - Tread Center | 6.3 ft | - | - |
| Turning Radius - Inside of Tires | 9.4 ft | - | - |
| Reach - Bucket at 45°* | 3.6 ft | - | - |
| Length - Overall* | 24.9 ft | - | - |
| Clearance - Load over Height** | 10.9 ft | - | - |
| Length - Hitch to Front Axle | 4.9 ft | - | - |
| Height - Ground to Beacon** | 12.2 ft | - | - |
| Articulation Angle | 40 ° | - | - |
| Height - Ground to Cab** | 10.9 ft | - | - |
| Note (3) | Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires. | - | - |
| Note (1) | *Vary with bucket. | - | - |
| Dump Angle at Full Lift | 48 ° | - | - |
Dimensions with Bucket - High Lift |
|||
| Length - Rear Axle to Bumper | 6.5 ft | - | - |
| Departure Angle | 33 ° | - | - |
| Height - Overall** | 18.7 ft | - | - |
| Reach - Bucket at 45°* | 4.4 ft | - | - |
| Dump Angle at Full Lift | 48 ° | - | - |
| Width - Bucket | 8.4 ft | - | - |
| Length - Wheel Base | 9.8 ft | - | - |
| Width - Tread Center | 6.3 ft | - | - |
| Length - Hitch to Front Axle | 4.9 ft | - | - |
| Height - Ground to Axle Center** | 2.25 ft | - | - |
| Note (1) | *Vary with bucket. | - | - |
| Clearance - Bucket at 45°* | 10.7 ft | - | - |
| Height - Bucket Pin** | 14.4 ft | - | - |
| Height - Ground to Beacon** | 12.2 ft | - | - |
| Carry Height - Bucket Pin | 1.9 ft | - | - |
| Clearance - Load over Height** | 11.6 ft | - | - |
| Turning Radius - Outside of Tires | 17.7 ft | - | - |
| Turning Radius - Over Bucket | 20.6 ft | - | - |
| Rack Angle at Full Lift | 51 ° | - | - |
| Rack Angle at Carry | 47 ° | - | - |
| Length - Overall* | 27 ft | - | - |
| Note (2) | **Vary with tire. | - | - |
| Height - Ground to Cab** | 10.9 ft | - | - |
| Turning Radius - Inside of Tires | 9.4 ft | - | - |
| Clearance - Level Bucket** | 13.4 ft | - | - |
| Width - Over Tires | 8.3 ft | - | - |
| Note (3) | Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires. | - | - |
| Dig Depth** | 5.3 in | - | - |
| Articulation Angle | 40 ° | - | - |
| Operating Weight | 31441 lb | - | - |
| Height - Ground Clearance** | 1.3 ft | - | - |
Sustainability |
|||
| Recyclability | 94% | - | - |
Operating Specifications |
|||
| Full Turn Tip Load | 19424 lb | - | - |
| Operating Weight | - | 112574 lb | - |
| Rated Payload - Quarry Face | - | 12.5 t | - |
| Rated Payload - Loose Material | - | 16 t | - |
| Bucket Capacity Range | - | 4.7-13 m3 (6.2-17 yd3) | 5-10,3 m³ (6,5-13,5 yd.³) |
| Cat Truck Match - Standard | - | 770～772 | 770/735/740/745 |
| Cat Truck Match - High Lift | - | 773～775 | 772/773 |
| Operating Weight - Standard | - | - | 97785 lb |
| Operating Weight - High Lift | - | - | 104005 lb |
| Rated Payload - Standard (Quarry Face) | - | - | 11 ton (US) |
| Rated Payload - Loose Material (Standard) | - | - | 14 ton (US) |
| Rated Payload - High Lift (Quarry Face) | - | - | 11 ton (US) |
| Rated Payload - Loose Material (High Lift) | - | - | 12.1 ton (US) |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Hydraulic System - Lift/Tilt |
|||
| Lift/Tilt System - Circuit | - | EH- Positive Flow Control, Flow Sharing | Load Sense |
| Lift/Tilt System | - | Variable displacement piston | - |
| Maximum Flow at 1,400-1,860 rpm | - | 153 gal/min | - |
| Relief Valve Setting - Lift/Tilt | - | 4757 psi | 4050 psi |
| Cylinders, Double Acting - Lift, Bore and Stroke | - | 210 mm × 1050 mm (8.7 in × 41.3 in) | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | - | 269 mm × 685 mm (8.7 in × 27 in) | - |
| Pilot System | - | Variable displacement piston | - |
| Relief Valve Setting - Main | - | 551 psi | - |
| Lift/Tilt System - Pump | - | - | 2 × 110 cc variable displacement |
| Maximum Flow at 2,165 rpm | - | - | 123 gal/min |
| Lift Cylinder - Bore | - | - | 7.5 in |
| Lift Cylinder - Stroke | - | - | 45 in |
| Tilt Cylinder - Bore | - | - | 6.7 in |
| Tilt Cylinder - Stroke | - | - | 28.4 in |
Hydraulic Cycle Time (1,400-1,860 rpm) |
|||
| Rack Back | - | 4.5 s | - |
| Raise | - | 8 s | - |
| Dump | - | 2.2 s | - |
| Lower Float Down | - | 3.5 s | - |
| Total Hydraulic Cycle Time - Empty Bucket | - | 18.2 s | - |
Hydraulic System - Steering |
|||
| Steering System - Circuit | - | Pilot, load sensing | Load Sense |
| Steering System - Pump | - | Piston, variable displacement | Piston, variable displacement |
| Maximum Flow | - | 71.3 gal/min | - |
| Relief Valve Setting - Steering | - | 4351 psi | - |
| Total Steering Angle | - | 86 ° | 70° |
| Steering Cycle Times - High Idle | - | 3.4 s | - |
| Steering Cycle Times - Low Idle | - | 5.6 s | - |
| Maximum Flow at 1,400 rpm | - | - | 52 gal/min |
| Steering Cut Off Pressure | - | - | 4000 psi |
Brakes |
|||
| Brakes | - | ISO 3450:2011 | ISO 3450:2011 |
Operator's Cab |
|||
| ROPS/FOPS | - | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards | ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) |
Sound Performance - Tier 4 Final / Stage V - Standard |
|||
| Operator Sound Pressure Level (ISO 6396:2008) | - | 73 dB(A) | - |
| Machine Sound Power Level (ISO 6395:2008) | - | 111 dB(A) | - |
Sound Performance - Tier 3 / Stage III - Standard |
|||
| Operator Sound Pressure Level (ISO 6396:2008) | - | 73 dB(A) | - |
| Machine Sound Power Level (ISO 6395:2008) | - | 112 dB(A) | - |
Dimensions (Approximate) - Standard Lift Linkage |
|||
| Ground to Top of ROPS | - | 13.8 ft | 13.5 ft |
| Ground to Top of Exhaust Stacks | - | 14.8 ft | 13.3 ft |
| Ground to Top of Hood | - | 10.9 ft | 10.7 ft |
| Rear Axle - Centerline to Bumper | - | 10.5 ft | 10.3 ft |
| Front Axle Centerline to Bucket Tip | - | 14 ft | 13.8 ft |
| Wheel Base | - | 14.9 ft | 12.5 ft |
| Maximum Overall Length | - | 39.3 ft | 36.6 ft |
| Ground to Lower Hitch Clearance | - | 1.9 ft | 1.5 ft |
| Clearance at Maximum Lift | - | 11.9 ft | 10.1 ft |
| B-Pin Height - Maximum Lift | - | 18 ft | 16.1 ft |
| Maximum Overall Height - Bucket Raised | - | 24.5 ft | 22.4 ft |
| Reach - Maximum Lift | - | 6.5 ft | 7.1 ft |
| Ground to Center of Front Axle | - | - | 3.2 ft |
| Ground to Fuel Tank Clearance | - | - | 2.3 ft |
| Note | - | - |
|
Dimensions (Approximate) - High Lift Linkage |
|||
| Ground to Top of ROPS | - | 13.8 ft | 13.5 ft |
| Ground to Top of Exhaust Stacks | - | 14.8 ft | 13.3 ft |
| Ground to Top of Hood | - | 10.9 ft | 10.7 ft |
| Rear Axle - Centerline to Bumper | - | 10.5 ft | 10.3 ft |
| Front Axle Centerline to Bucket Tip | - | 15.3 ft | 15.3 ft |
| Wheel Base | - | 14.9 ft | 12.5 ft |
| Maximum Overall Length | - | 40.7 ft | 38 ft |
| Ground to Lower Hitch Clearance | - | 1.9 ft | 1.5 ft |
| Clearance at Maximum Lift | - | 13.3 ft | 11.6 ft |
| B-Pin Height - Maximum Lift | - | 19.3 ft | 17.6 ft |
| Maximum Overall Height - Bucket Raised | - | 25.8 ft | 23.9 ft |
| Reach - Maximum Lift | - | 6.8 ft | 7.4 ft |
| Ground to Center of Front Axle | - | - | 3.2 ft |
| Ground to Fuel Tank Clearance | - | - | 2.3 ft |
| Note | - | - |
|
Hydraulic Cycle Times |
|||
| Rack Back | - | - | 4.5 s |
| Raise | - | - | 9 s |
| Dump | - | - | 3.5 s |
| Lower | - | - | 5.2 s |
| Lower Float Down | - | - | 4.3 s |
| Total Hydraulic Cycle Time | - | - | 21.3 s |
Sound Performance - Standard |
|||
| Operator Sound Level (ISO 6396) | - | - | 72 dB(A) |
| Machine Sound Level (ISO 6395) | - | - | 112 dB(A) |
| Note | - | - |
|
Sound Performance - Suppression |
|||
| Operator Sound Level (ISO 6396) | - | - | 72 dB(A) |
| Machine Sound Level (ISO 6395) | - | - | 110 dB(A) |
| Note | - | - |
|
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket |
|||
| Ground to Top of ROPS | - | - | 13.5 ft |
| Ground to Top of Exhaust Stacks | - | - | 13.3 ft |
| Ground to Top of Hood | - | - | 10.7 ft |
| Ground to Center of Rear Axle | - | - | 3.2 ft |
| Ground to Fuel Tank Clearance | - | - | 2.3 ft |
| Ground to Lower Hitch Clearance | - | - | 1.5 ft |
| Reach at Maximum Lift | - | - | 8 ft |
| Clearance at Maximum Lift | - | - | 10.7 ft |
| B-Pin Height at Maximum Lift | - | - | 15 ft |
| Maximum Overall Height, Bucket Raised | - | - | 20.9 ft |
| Rear Axle Center Line to Bumper | - | - | 10.3 ft |
| Wheel Base | - | - | 12.5 ft |
| Maximum Overall Length | - | - | 35 ft |
| Front Axle Centerline to Bucket Tip | - | - | 12.2 ft |
Dimensions (Approximate) - Quick Coupler and Fork |
|||
| Ground to Top of ROPS | - | - | 13.5 ft |
| Ground to Top of Exhaust Stacks | - | - | 13.3 ft |
| Ground to Top of Hood | - | - | 10.7 ft |
| Ground to Center of Rear Axle | - | - | 3.2 ft |
| Ground to Fuel Tank Clearance | - | - | 2.3 ft |
| Ground to Lower Hitch Clearance | - | - | 1.5 ft |
| B-Pin Height at Maximum Lift | - | - | 15 ft |
| Rear Axle Center Line to Bumper | - | - | 10.3 ft |
| Wheel Base | - | - | 12.5 ft |
| Maximum Overall Length | - | - | 35.4 ft |
| Front Axle Centerline to Bucket Tip | - | - | 12.6 ft |
Add a Similar Product:
-
995 Wheel Loader Add
-
992 Wheel Loader Add
-
990 Wheel Loader Add
-
988 GC Wheel Loader Add
-
988 XE Wheel Loader Add
-
938M Waste Handler Small Wheel Loader Add
-
950 GC Wheel Loader | Front Loader Add
-
938M Aggregate Handler Small Wheel Loader Add
-
938M Small Wheel Loader Add
-
930M Waste Handler Small Wheel Loader Add