Compare Equipment Go Back
 926M Aggregate Handler Small Wheel Loader |
 972 XE |
|
|
Engine |
|||
|---|---|---|---|
| Maximum Gross Power | 168 HP | - | - |
| Bore | 4 in | - | - |
| Stroke | 5 in | - | - |
| Displacement | 427 in³ | 9.3 L | - |
| Emissions | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. | - | - |
| Maximum Rated Gross Power - ISO 14396 | 168 HP | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586 ft·lbf | - | - |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. | - |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | 168 HP | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573 ft·lbf | - | - |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h | - |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | 160 HP | - | - |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | 1600 r/min | - | - |
| Engine Model | Cat® C7.1 | Cat C9.3B | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf | - | - |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588 ft·lbf | - | - |
| Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | - |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | 170 HP | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 HP | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 HP | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 HP | - | - |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | 587 ft·lbf | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | 162 HP | - | - |
| Maximum Rated Gross Power - ISO 14396 (metric) | 170 HP | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Net Power (Standard Power Mode: Range 1-3*) | 1600 r/min | - | - |
| Net Power (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | 572 ft·lbf | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158 HP | - | - |
| Engine Power @ 1,600 rpm - ISO 14396:2002 | - | 339 HP | - |
| Gross Power @ 1,600 rpm - SAE J1995:2014 | - | 343 HP | - |
| Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 | - | 316 HP | - |
| Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 | - | 1287 ft-lb | - |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 | - | 1375 lb/ft | - |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 | - | 1388 lb/ft | - |
Weights |
|||
| Operating Weight | 28577 lb | 54858 lb | - |
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - | - |
| Operating Weight (2) | 12 963 kg (28,577 lb)~ | - | - |
| Operating Weight (1) | 12 891 kg (28,418 lb)** | - | - |
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. | - | - |
| Note | - | Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second | - |
Buckets |
|||
| Bucket Capacities | 2.5-5.0 m3 (3.3-6.5 yd3) | - | - |
Cab |
|||
| ROPS | ISO 3471:2008 | - | - |
| Note (1) | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. | - | - |
| Declared Sound Levels | Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
- | - |
| FOPS | ISO 3449:2005 LEVEL II | - | - |
Loader Hydraulic System |
|||
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 40 gal/min | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061 psi | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771 psi | - | - |
| Lift Cylinder, Double Acting - Stroke | 28.7 in | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.5/6.2 seconds | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | - | - |
| Note (3) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.6/2.6 seconds | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 40 gal/min | - | - |
| Relief Pressure - Tilt Cylinder | 4061 psi | - | - |
| Tilt Cylinder, Double Acting - Stroke | 20.3 in | - | - |
| Maximum Flow - Implement Pump | 40 gal/min | - | - |
| Maximum Working Pressure - Implement Pump | 3771 psi | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.6/10.5 seconds | - | - |
| Tilt Cylinder, Double Acting - Bore Diameter | 5.5 in | - | - |
| Tilt Cylinder, Double Acting - Rod Diameter | 3 in | - | - |
| Lift Cylinder, Double Acting - Rod Diameter | 2.4 in | - | - |
| Lift Cylinder, Double Acting - Bore Diameter | 4.3 in | - | - |
Service Refill Capacities |
|||
| Cooling System | 7.9 gal (US) | 17.4 gal (US) | - |
| Fuel Tank | 51.5 gal (US) | 80.1 gal (US) | - |
| Rear Axles | 6.6 gal (US) | - | - |
| Front Axles | 6.9 gal (US) | - | - |
| Transmission - Gear Box | 2.2 gal (US) | - | - |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Engine Crankcase | 5.3 gal (US) | - | - |
| Hydraulic Tank | 23.8 gal (US) | 30.1 gal (US) | - |
| Hydraulic System - Including Tank | 42.3 gal (US) | - | - |
| Crankcase | - | 6.1 gal (US) | - |
| DEF Tank | - | 6.9 gal (US) | - |
| Differential - Final Drives - Front | - | 15.1 gal (US) | - |
| Differential - Final Drives - Rear | - | 15.1 gal (US) | - |
| Transmission | - | 15.5 gal (US) | - |
Steering |
|||
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 2.8 s | - | - |
| Steering Cylinder, Double Acting - Stroke | 17.2 in | - | - |
| Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - | - |
| Maximum Working Pressure - Steering Pump | 3500 psi | - | - |
| Maximum Flow - Steering Pump | 34 gal/min | - | - |
| Steering Cylinder, Double Acting - Bore Diameter | 2.8 in | - | - |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.4 s | - | - |
| Steering Cylinder, Double Acting - Rod Diameter | 1.6 in | - | - |
Power Train |
|||
| Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - | - |
| Brakes - Service | Inboard wet disc | - | - |
| Rear Axle | Oscillating | - | - |
| Brakes - Parking | Spring applied hydraulically released | - | - |
| Rear Axle - Traction Aid - Optional | Limited slip differential | - | - |
| Note (3) | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M. | - | - |
| Front Axle | Fixed | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 | ± 13.5 degrees | - | - |
| Note (2) | Offset rims available to meet European roading requirements. | - | - |
| Front Axle - Traction Aid* | Locking differential (standard) | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees | - | - |
Transmission |
|||
| Forward and Reverse - Range 4 | 25 mile/h | - | - |
| Note | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. | - |
| Forward and Reverse - Range 2 | 8 mile/h | - | - |
| Forward and Reverse - Range 3 | 17 mile/h | - | - |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) | - | - |
| Forward - 1 | - | 4.1 mile/h | - |
| Forward - 2 | - | 8.4 mile/h | - |
| Forward - 3 | - | 15 mile/h | - |
| Forward - 4 | - | 24.5 mile/h | - |
| Reverse - 1 | - | 4.5 mile/h | - |
| Reverse - 2 | - | 9.2 mile/h | - |
| Reverse - 3 | - | 16.5 mile/h | - |
| Reverse - 4 | - | 24.5 mile/h | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). | - |
Operating Specifications |
|||
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. | For a machine configuration as defined under Weight. | - |
| Full Turn Tip Load (2) | 8148 kg (17,962 lb)~ | - | - |
| Full Turn Tip Load (1) | 8047 kg (17,740 lb)** | - | - |
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. | - |
| Breakout Force | - | 44072 lb | - |
| Static Tipping Load - Full 40° Turn - No Tire Deflection | - | 17505 kg | - |
| Static Tipping Load - Full 40° Turn - With Tire Deflection | - | 35919 lb | - |
Sustainability |
|||
| Recyclability | 94% | - | - |
Bucket Capacities |
|||
| Bucket Range | - | 2.8-14.0 m³ 3.75-18.25 yd³ | - |
Sound |
|||
| Note (1) | - | ** For machines in European Union countries and in countries that adopt the EU Directives. | - |
| Note (2) | - | ***European Union Directive 2000/14/EC as amended by 2005/88/EC. | - |
| With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* | - | 108 | - |
| With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) | - | 69 dB(A) | - |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) | - | 109 dB(A) | - |
| With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) | - | 76 | - |
| With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) | - | 70 dB(A) | - |
| With Cooling Fan Speed at Maximum Value - Note | - | Distance of 15 m (49.2 ft), moving forward in second gear ratio. | - |
Hydraulic System |
|||
| Implement System - Maximum Operating Pressure | - | 4496 psi | - |
| Implement System - Maximum Pump Output at 2,250 rpm | - | 99 gal/min | - |
| Hydraulic Cycle Time - Total | - | 10.7 seconds | - |
Dimensions |
|||
| Note | - | All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. | - |
Dimensions - High Lift |
|||
| Centerline of Rear Axle to Edge of Counterweight | - | 8.1 ft | - |
| Centerline of Rear Axle to Hitch | - | 5.1 ft | - |
| Ground Clearance | - | 1.4 ft | - |
| Height - Top of Exhaust Pipe | - | 11.8 ft | - |
| Height - Top of Hood | - | 9.5 ft | - |
| Height - Top of ROPS | - | 11.1 ft | - |
| Hinge Pin Height at Carry | - | 2.6 ft | - |
| Hinge Pin Height at Maximum Lift | - | 15.9 ft | - |
| Lift Arm Clearance at Maximum Lift | - | 13.8 ft | - |
| Overall Length - Without Bucket | - | 26.6 ft | - |
| Tread Width | - | 7.3 ft | - |
| Wheel Base | - | 11.8 ft | - |
| Width over Tires (Loaded) | - | 9.11 ft | - |
| Rack Back at Ground | - | 37 degrees | - |
| Rack Back - Maximum Lift | - | 71 degrees | - |
| Rack Back - Carry Height | - | 49 degrees | - |
Dimensions - Standard Lift |
|||
| Centerline of Rear Axle to Hitch | - | 5.1 ft | - |
| Ground Clearance | - | 420 mm | - |
| Height - Top of Exhaust Pipe | - | 3527 mm | - |
| Height - Top of Hood | - | 2846 mm | - |
| Height - Top of ROPS | - | 3589 mm | - |
| Hinge Pin Height at Carry | - | 2.2 ft | - |
| Hinge Pin Height at Maximum Lift | - | 4464 mm | - |
| Lift Arm Clearance at Maximum Lift | - | 3843 mm | - |
| Overall Length - Without Bucket | - | 7731 mm | - |
| Tread Width | - | 7.3 ft | - |
| Wheel Base | - | 3550 mm | - |
| Width over Tires (Loaded) | - | 9.11 ft | - |
| Rack Back - Carry Height | - | 49 degrees | - |
| Rack Back at Ground | - | 39 degrees | - |
| Centerline of Rear Axle to Edge of Counterweight | - | 8 ft | - |
| Rack Back - Maximum Lift | - | 56 degrees | - |
