926M Aggregate Handler Small Wheel Loader

360° View

Video

Product description

The Cat® 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

Engine

Maximum Gross Power - 168HP
Bore - 4in
Stroke - 5in
Displacement - 427in³
Emissions - The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
Maximum Rated Gross Power - ISO 14396 - 168HP
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) - 586ft·lbf
Note (2) - Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) - 1800r/min
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) - 168HP
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) - 573ft·lbf
Note (3) - No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) - 160HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) - 1600r/min
Engine Model - Cat® C7.1
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) - 601ft·lbf
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) - 588ft·lbf
Note (1) - *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) - 170HP
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 166HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 164HP
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) - 163HP
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) - 587ft·lbf
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) - 162HP
Maximum Rated Gross Power - ISO 14396 (metric) - 170HP
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - 156HP
Net Power (Standard Power Mode: Range 1-3*) - 1600r/min
Net Power (Performance Power Mode: Range 1-4) - 1800r/min
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - 156HP
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) - 572ft·lbf
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) - 158HP

Weights

Operating Weight - 28577lb
Note (2) - ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Operating Weight (2) - 12 963 kg (28,577 lb)~
Operating Weight (1) - 12 891 kg (28,418 lb)**
Note (1) - **Aggregate Handler machine equipped with full counterweight and optional guards.

Buckets

Bucket Capacities - 2.5-5.0 m3 (3.3-6.5 yd3)

Cab

ROPS - ISO 3471:2008
Note (1) - * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Declared Sound Levels - Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
FOPS - ISO 3449:2005 LEVEL II

Loader Hydraulic System

Maximum Flow - Implement Pump - 4th Function Maximum Flow* - 40gal/min
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure - 4061psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure - 3771psi
Lift Cylinder, Double Acting - Stroke - 28.7in
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) - 1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) - 5.5/6.2 seconds
Note (2) - Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (1) - Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (3) - * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) - 2.6/2.6 seconds
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* - 40gal/min
Relief Pressure - Tilt Cylinder - 4061psi
Tilt Cylinder, Double Acting - Stroke - 20.3in
Maximum Flow - Implement Pump - 40gal/min
Maximum Working Pressure - Implement Pump - 3771psi
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time - 9.6/10.5 seconds
Tilt Cylinder, Double Acting - Bore Diameter - 5.5in
Tilt Cylinder, Double Acting - Rod Diameter - 3in
Lift Cylinder, Double Acting - Rod Diameter - 2.4in
Lift Cylinder, Double Acting - Bore Diameter - 4.3in

Service Refill Capacities

Cooling System - 7.9gal (US)
Fuel Tank - 51.5gal (US)
Rear Axles - 6.6gal (US)
Front Axles - 6.9gal (US)
Transmission - Gear Box - 2.2gal (US)
Diesel Exhaust Fluid (DEF) Tank - 5gal (US)
Engine Crankcase - 5.3gal (US)
Hydraulic Tank - 23.8gal (US)
Hydraulic System - Including Tank - 42.3gal (US)

Steering

Note (2) - Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited - 2.8s
Steering Cylinder, Double Acting - Stroke - 17.2in
Note (1) - Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Maximum Working Pressure - Steering Pump - 3500psi
Maximum Flow - Steering Pump - 34gal/min
Steering Cylinder, Double Acting - Bore Diameter - 2.8in
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed - 2.4s
Steering Cylinder, Double Acting - Rod Diameter - 1.6in

Power Train

Note (1) - Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Brakes - Service - Inboard wet disc
Rear Axle - Oscillating
Brakes - Parking - Spring applied hydraulically released
Rear Axle - Traction Aid - Optional - Limited slip differential
Note (3) - *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Front Axle - Fixed
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 - ± 13.5 degrees
Note (2) - Offset rims available to meet European roading requirements.
Front Axle - Traction Aid* - Locking differential (standard)
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 - ± 10.5 degrees

Transmission

Forward and Reverse - Range 4 - 25mile/h
Note - * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 2 - 8mile/h
Forward and Reverse - Range 3 - 17mile/h
Forward and Reverse - Range 1* - 1-13 km/h (0.6-8 mph)

Air Conditioning System

Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Operating Specifications

Note (1) - **Aggregate Handler machine equipped with full counterweight and optional guards.
Full Turn Tip Load (2) - 8148 kg (17,962 lb)~
Full Turn Tip Load (1) - 8047 kg (17,740 lb)**
Note (2) - ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.

Sustainability

Recyclability - 94%

Standard Equipment:

Power Train
- Axle Duo-Cone^™ seal guards
- Auto idle shut down feature
- Cat C7.1 engine
  – Power modes (Standard and Performance)
  – Power by range (High Power in Range 4)
  – Turbocharged and aftercooled
  – Diesel particulate filter (Fit for Life)
- Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
  – Operator modes (Default, TC, Hystat, and Ice)
  – Directional Shift Aggressiveness (fast, medium, slow)
  – Rimpull control, adjust wheel torque
  – Creeper control, adjust ground speed
- Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Oil sampling ports
- Throttle lock and max speed limiter
Hydraulics
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
Electrical
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Product Link PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
Operator Environment
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview
- External heated mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Mirror, single
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Suspension seat, fabric
Other Standard Equipment
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures

Optional Equipment:

Optional Equipment
- Autolube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Differential, limited slip, rear
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
  – Camera, rearview integrated into advanced display
  – Electrically adjustable external heated mirrors (2)
  – Secondary display to enable features and adjust parameters
  – LED interior lighting
  – Sunscreen, front and rear
  – Touchscreen secondary display
  – Ride control adjustable speed activation
  – Preventative maintenance reminders
  – Integrated help function (26 languages)
- Camera, roof mounted, front view with separate display
- Cold start package
  – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Counterweight, additional options
- Coupler, (Fusion and ISO 23727)
- Debris packages (low, medium, high)
- Fenders (extended cover and full coverage)
- Guarding packages
- Linkage, high lift
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Payload Technology
  – Cat Production Measurement (CPM)
  – CPM Printer
- Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Rear Object Detection
- Ride Control System, adjustable through secondary display
- Seats
  – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
  – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Steering
  – Dual mode and secondary
- Tire Pressure Monitoring (TPM)