Compare Equipment Go Back
 926M Aggregate Handler Small Wheel Loader |
 995 Wheel Loader |
|
|
Engine |
|||
|---|---|---|---|
| Maximum Gross Power | 168 HP | - | - |
| Bore | 4 in | 6.7 in | - |
| Stroke | 5 in | 8.5 in | - |
| Displacement | 427 in³ | 4766 in³ | - |
| Emissions | The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards. | U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent | - |
| Maximum Rated Gross Power - ISO 14396 | 168 HP | - | - |
| Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) | 586 ft·lbf | - | - |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed. | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. | - |
| Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) | 168 HP | - | - |
| Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) | 573 ft·lbf | - | - |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. | The gross power advertised is with the fan at maximum speed. | - |
| Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) | 160 HP | - | - |
| Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) | 1600 r/min | - | - |
| Engine Model | Cat® C7.1 | Cat® 3516E | - |
| Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) | 601 ft·lbf | - | - |
| Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) | 588 ft·lbf | - | - |
| Note (1) | *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. | The power ratings apply when tested under the reference conditions for the specified standard. | - |
| Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) | 170 HP | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 166 HP | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 164 HP | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) | 163 HP | - | - |
| Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) | 587 ft·lbf | - | - |
| Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) | 162 HP | - | - |
| Maximum Rated Gross Power - ISO 14396 (metric) | 170 HP | - | - |
| Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Net Power (Standard Power Mode: Range 1-3*) | 1600 r/min | - | - |
| Net Power (Performance Power Mode: Range 1-4) | 1800 r/min | - | - |
| Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 156 HP | - | - |
| Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) | 572 ft·lbf | - | - |
| Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) | 158 HP | - | - |
| Engine Power - ISO 14396 | - | 1847 HP | - |
| Gross Power - SAE J1995 | - | 1870 HP | - |
| Net Power - SAE J1349 - Standard Ambient | - | 1739 HP | - |
| Net Power - SAE J1349 - High Ambient | - | 1696 HP | - |
| Peak Torque - 1,200 rpm - SAE J1995 | - | 8549 lb/ft | - |
| Torque Rise | - | 39% | - |
Weights |
|||
| Operating Weight | 28577 lb | - | - |
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - | - |
| Operating Weight (2) | 12 963 kg (28,577 lb)~ | - | - |
| Operating Weight (1) | 12 891 kg (28,418 lb)** | - | - |
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. | - | - |
Buckets |
|||
| Bucket Capacities | 2.5-5.0 m3 (3.3-6.5 yd3) | - | - |
Cab |
|||
| ROPS | ISO 3471:2008 | - | - |
| Note (1) | * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. | - | - |
| Declared Sound Levels | Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)* |
- | - |
| FOPS | ISO 3449:2005 LEVEL II | - | - |
Loader Hydraulic System |
|||
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 40 gal/min | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061 psi | - | - |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771 psi | - | - |
| Lift Cylinder, Double Acting - Stroke | 28.7 in | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) | 1.5/1.7 seconds | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) | 5.5/6.2 seconds | - | - |
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Note (1) | Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder. | - | - |
| Note (3) | * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) | 2.6/2.6 seconds | - | - |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 40 gal/min | - | - |
| Relief Pressure - Tilt Cylinder | 4061 psi | - | - |
| Tilt Cylinder, Double Acting - Stroke | 20.3 in | - | - |
| Maximum Flow - Implement Pump | 40 gal/min | - | - |
| Maximum Working Pressure - Implement Pump | 3771 psi | - | - |
| Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time | 9.6/10.5 seconds | - | - |
| Tilt Cylinder, Double Acting - Bore Diameter | 5.5 in | - | - |
| Tilt Cylinder, Double Acting - Rod Diameter | 3 in | - | - |
| Lift Cylinder, Double Acting - Rod Diameter | 2.4 in | - | - |
| Lift Cylinder, Double Acting - Bore Diameter | 4.3 in | - | - |
Service Refill Capacities |
|||
| Cooling System | 7.9 gal (US) | - | - |
| Fuel Tank | 51.5 gal (US) | - | - |
| Rear Axles | 6.6 gal (US) | - | - |
| Front Axles | 6.9 gal (US) | - | - |
| Transmission - Gear Box | 2.2 gal (US) | - | - |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) | - | - |
| Engine Crankcase | 5.3 gal (US) | - | - |
| Hydraulic Tank | 23.8 gal (US) | - | - |
| Hydraulic System - Including Tank | 42.3 gal (US) | - | - |
Steering |
|||
| Note (2) | Flow values listed are for a machine running in Performance Power Mode (1,800 rpm). | - | - |
| Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited | 2.8 s | - | - |
| Steering Cylinder, Double Acting - Stroke | 17.2 in | - | - |
| Note (1) | Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders. | - | - |
| Maximum Working Pressure - Steering Pump | 3500 psi | - | - |
| Maximum Flow - Steering Pump | 34 gal/min | - | - |
| Steering Cylinder, Double Acting - Bore Diameter | 2.8 in | - | - |
| Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed | 2.4 s | - | - |
| Steering Cylinder, Double Acting - Rod Diameter | 1.6 in | - | - |
Power Train |
|||
| Note (1) | Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency. | - | - |
| Brakes - Service | Inboard wet disc | - | - |
| Rear Axle | Oscillating | - | - |
| Brakes - Parking | Spring applied hydraulically released | - | - |
| Rear Axle - Traction Aid - Optional | Limited slip differential | - | - |
| Note (3) | *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M. | - | - |
| Front Axle | Fixed | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 | ± 13.5 degrees | - | - |
| Note (2) | Offset rims available to meet European roading requirements. | - | - |
| Front Axle - Traction Aid* | Locking differential (standard) | - | - |
| Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 | ± 10.5 degrees | - | - |
Transmission |
|||
| Forward and Reverse - Range 4 | 25 mile/h | - | - |
| Note | * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). | Travel speeds based on 58/85-57 tires. | - |
| Forward and Reverse - Range 2 | 8 mile/h | - | - |
| Forward and Reverse - Range 3 | 17 mile/h | - | - |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) | - | - |
| Transmission Type | - | Cat Planetary Power Shift | - |
| Forward - 1 | - | 4.6 mile/h | - |
| Forward - 2 | - | 8 mile/h | - |
| Forward - 3 | - | 13.6 mile/h | - |
| Reverse - 1 | - | 5 mile/h | - |
| Reverse - 2 | - | 8.8 mile/h | - |
| Reverse - 3 | - | 14.9 mile/h | - |
| Direct Drive - Forward 1 | - | Lock-up disables | - |
| Direct Drive - Forward 2 | - | 8.7 mile/h | - |
| Direct Drive - Forward 3 | - | 15.2 mile/h | - |
| Direct Drive - Reverse 1 | - | Lock-up disables | - |
| Direct Drive - Reverse 2 | - | 9.6 mile/h | - |
| Direct Drive - Reverse 3 | - | 16.8 mile/h | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes. | - | - |
Operating Specifications |
|||
| Note (1) | **Aggregate Handler machine equipped with full counterweight and optional guards. | - | - |
| Full Turn Tip Load (2) | 8148 kg (17,962 lb)~ | - | - |
| Full Turn Tip Load (1) | 8047 kg (17,740 lb)** | - | - |
| Note (2) | ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package. | - | - |
| Operating Weight - Standard | - | 543772 lb | - |
| Bucket Capacity Range | - | 17.2-43.6 m3 (22.3-57 yd3) | - |
| Operating Weight - High Lift | - | 547675 lb | - |
| Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | - | 60 ton (US) | - |
| Rated Payload - Standard Lift (Moderate to High Digging Resistance) | - | 50 ton (US) | - |
| Rated Payload - High Lift (Low to Moderate Digging Resistance) | - | 55 ton (US) | - |
| Rated Payload - High Lift (Moderate to High Digging Resistance) | - | 50 ton (US) | - |
| Note | - | *Please contact your local dealer to determine if your application is suitable for this increased rated payload. | - |
| Cat Truck Match - Standard | - | 785/789 | - |
| Cat Truck Match - High Lift | - | 789/793/794 | - |
Sustainability |
|||
| Recyclability | 94% | - | - |
Complete System Fill |
|||
| Fuel Tank - Standard | - | 856 gal (US) | - |
| Fuel Tank - With 24 hr Attachment | - | 1414 gal (US) | - |
| Cooling System | - | 138 gal (US) | - |
| Engine Crankcase | - | 76 gal (US) | - |
| Transmission | - | 110 gal (US) | - |
| Differential - Final Drives - Front | - | 220 gal (US) | - |
| Differential - Final Drives - Rear | - | 200 gal (US) | - |
| Hydraulic Tank - Implement and Hydraulic Fan | - | 270 gal (US) | - |
| Hydraulic Tank - Steering and Braking | - | 100 gal (US) | - |
| Oil Renewal System (ORS)* | - | 20 gal (US) | - |
| Note | - | *Not available on Tier 4 Final/Stage V machines. Not available in all regions. | - |
Axles |
|||
| Front | - | Fixed | - |
| Rear | - | Trunnion | - |
| Oscillation Angle | - | 9° | - |
Cooling System |
|||
| Ambient Capability Hydraulically Driven Demand Fan - Standard | - | 109.4 °F | - |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | - | 131 °F | - |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | - | 127.4 °F | - |
Sound Performance - Standard |
|||
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | - | 74 dB(A) | - |
| Machine Sound Level (ISO 6395:2008) | - | 119 dB(A) | - |
| Note | - | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c | - |
Sound Performance - Suppression |
|||
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | - | 73 dB(A) | - |
| Machine Sound Level (ISO 6395:2008) | - | 117 dB(A) | - |
| Note | - | The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c | - |
Hydraulic System - Steering |
|||
| Steering System - Circuit | - | Pilot, Load Sensing | - |
| Steering System - Pump | - | Piston, Variable Displacement | - |
| Total Steering Angle | - | 80 degrees | - |
| Steering Cycle Times - Low Idle | - | 7.6 s | - |
| Steering Cycle Times - High Idle | - | 4.3 s | - |
Dimensions - Standard Lift - Approximate |
|||
| B-Pin Height - Maximum Lift | - | 28.8 ft | - |
| Clearance at Maximum Lift | - | 19.8 ft | - |
| Dump Angle at Maximum Lift | - | –50.0 degrees | - |
| Front Axle Centerline to Bucket Tip | - | 21.9 ft | - |
| Ground to Bumper Clearance | - | 4.4 ft | - |
| Ground to Center of Axles | - | 6 ft | - |
| Ground to Lower Hitch Clearance | - | 2.9 ft | - |
| Ground to Top of Exhaust Stacks | - | 23.2 ft | - |
| Ground to Top of Hood | - | 18.6 ft | - |
| Ground to Top of ROPS | - | 23.4 ft | - |
| Maximum Overall Height - Bucket Raised | - | 39.3 ft | - |
| Maximum Overall Length | - | 64.6 ft | - |
| Note | - | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. | - |
| Rack Angle at Maximum Lift | - | 59.5 degrees | - |
| Rack Back Angle - Carry | - | 47.7 degrees | - |
| Rack Back Angle - Ground Level | - | 39.7 degrees | - |
| Reach - Maximum Lift | - | 9.6 ft | - |
| Rear Axle - Centerline to Bumper | - | 20.4 ft | - |
| Tread Width | - | 14.1 ft | - |
| Wheel Base | - | 22.3 ft | - |
| Width - Over Tires - With Bulge | - | 18.8 ft | - |
Dimensions - High Lift - Approximate |
|||
| B-Pin Height - Maximum Lift | - | 31.6 ft | - |
| Clearance at Maximum Lift | - | 22.6 ft | - |
| Dump Angle at Maximum Lift | - | –50.0 degrees | - |
| Front Axle Centerline to Bucket Tip | - | 24.2 ft | - |
| Ground to Bumper Clearance | - | 4.4 ft | - |
| Ground to Center of Axles | - | 6 ft | - |
| Ground to Lower Hitch Clearance | - | 2.9 ft | - |
| Ground to Top of Exhaust Stacks | - | 23.2 ft | - |
| Ground to Top of Hood | - | 18.6 ft | - |
| Ground to Top of ROPS | - | 23.4 ft | - |
| Maximum Overall Height - Bucket Raised | - | 42.1 ft | - |
| Maximum Overall Length | - | 66.9 ft | - |
| Note | - | Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. | - |
| Rack Angle at Maximum Lift | - | 59.4 degrees | - |
| Rack Back Angle - Carry | - | 53.5 degrees | - |
| Rack Back Angle - Ground Level | - | 45 degrees | - |
| Reach - Maximum Lift | - | 9.4 ft | - |
| Rear Axle - Centerline to Bumper | - | 20.4 ft | - |
| Tread Width | - | 14.1 ft | - |
| Wheel Base | - | 22.3 ft | - |
| Width - Over Tires - With Bulge | - | 18.8 ft | - |
Hydraulic System - Lift/Tilt |
|||
| Lift/Tilt System - Circuit | - | Positive Flow Control | - |
| Lift/Tilt System - Pump | - | Variable Displacement Piston | - |
| Maximum Flow at 1,700 rpm Engine Speed | - | 541 gal/min | - |
| Relief Valve Setting - Lift/Tilt | - | 5004 psi | - |
| Cylinders, Double Acting - Lift, Bore and Stroke | - | 370 × 1713 mm (14.6 × 67.4 in) | - |
| Cylinders, Double Acting - Tilt, Bore and Stroke | - | 310 × 1086 mm (12.2 × 42.8 in) | - |
| Pilot System | - | Open Loop and Pressure Reducing | - |
Hydraulic Cycle Times |
|||
| Rack Back | - | 4.9 s | - |
| Raise | - | 12.6 s | - |
| Dump | - | 3.1 s | - |
| Lower Float Down | - | 4.2 s | - |
Brakes |
|||
| Brakes | - | ISO 3450:2011 | - |
