Engine meets Tier 4 Final/Stage V emission standards.
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
-
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
-
-
Maximum Gross Power - ISO 14396
121 HP
-
-
Net Power - SAE J1349:2011
-
541 HP
-
Engine Power - ISO 14396:2002
-
580 HP
-
Gross Power - SAE J1995:2014
-
588 HP
-
Rated Speed
-
1700/min
-
Peak Power Speed
-
1500/rpm
-
Peak Torque - 1,200 rpm
-
2230 lb/ft
-
Torque Rise
-
58 %
-
Weights
Operating Weight
21742 lb
-
-
Buckets
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
4.7-13 m3 (6.2-17 yd3)
-
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
-
-
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
-
-
Sustainability
Recyclability
95%
-
-
Service Refill Capacities
Transmission
0.8 gal (US)
31.7 gal (US)
-
Engine Crankcase
2.6 gal (US)
-
-
Axles - Rear
4.5 gal (US)
-
-
Hydraulic System - Including Tank
25.9 gal (US)
-
-
Cooling System
5.7 gal (US)
31.7 gal (US)
-
Fuel Tank
43.6 gal (US)
188 gal (US)
-
Hydraulic Tank
14.5 gal (US)
-
-
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
-
-
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US)
-
-
Axles - Front
4.5 gal (US)
-
-
Coolant (Validated by Test Cell Fill Quantities)
-
33 gal (US)
-
Crankcase
-
15.9 gal (US)
-
Diesel Exhaust Fluid Tank
-
8.7 gal (US)
-
Transmission - Validated by Test Cell Fill Quantities
-
29 gal (US)
-
Differential - Final Drives - Front
-
49.1 gal (US)
-
Differential - Final Drives - Rear
-
49.1 gal (US)
-
Hydraulic System Factory Fill
-
125.5 gal (US)
-
Hydraulic System - Tank Only
-
63.4 gal (US)
-
Cab
ROPS
ISO 3471:2008
-
-
FOPS
ISO 3449:2005
-
-
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
-
-
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
-
-
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
-
-
Note (4)
*The measurements were conducted with the cab doors and windows closed.
-
-
Loader Hydraulic System
Maximum Flow - Implement Pump
43.6 gal/min
-
-
Relief Pressure - Tilt Cylinder
4641 psi
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
25 gal/min
-
-
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
4641 psi
-
-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7 s
-
-
Note
All cycle times listed are with cylinder snubbing turned off.
-
-
Maximum Working Pressure - Implement Pump
4061 psi
-
-
Hydraulic Cycle Time - Total Cycle Time
11.5 s
-
-
Hydraulic Cycle Time - Rackback
2.2 s
-
-
Hydraulic Cycle Time - Dump, at Maximum Reach
1.8 s
-
-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
4.8 s
-
-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
40 gal/min
-
-
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
25 gal/min
-
-
Steering
Maximum Working Pressure - Steering Pump
3190 psi
-
-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.3 s
-
-
Steering Articulation Angle - Each Direction
40 °
-
-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.4 turns
-
-
Maximum Flow - Steering Pump
21.7 gal/min
-
-
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Other tire choices are available. Contact your Cat dealer for details.
-
-
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
-
-
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
-
-
Operating Specifications
Operating Weight
-
112574 lb
-
Rated Payload - Quarry Face
-
12.5 t
-
Rated Payload - Loose Material
-
16 t
-
Bucket Capacity Range
-
4.7-13 m3 (6.2-17 yd3)
-
Cat Truck Match - Standard
-
770～772
-
Cat Truck Match - High Lift
-
773～775
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
EH- Positive Flow Control, Flow Sharing
-
Lift/Tilt System
-
Variable displacement piston
-
Maximum Flow at 1,400-1,860 rpm
-
153 gal/min
-
Relief Valve Setting - Lift/Tilt
-
4757 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
210 mm × 1050 mm (8.7 in × 41.3 in)
-
Cylinders, Double Acting - Tilt, Bore and Stroke
-
269 mm × 685 mm (8.7 in × 27 in)
-
Pilot System
-
Variable displacement piston
-
Relief Valve Setting - Main
-
551 psi
-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back
-
4.5 s
-
Raise
-
8 s
-
Dump
-
2.2 s
-
Lower Float Down
-
3.5 s
-
Total Hydraulic Cycle Time - Empty Bucket
-
18.2 s
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, load sensing
-
Steering System - Pump
-
Piston, variable displacement
-
Maximum Flow
-
71.3 gal/min
-
Relief Valve Setting - Steering
-
4351 psi
-
Total Steering Angle
-
86 °
-
Steering Cycle Times - High Idle
-
3.4 s
-
Steering Cycle Times - Low Idle
-
5.6 s
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Brakes
Brakes
-
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
Sound Performance - Tier 4 Final / Stage V - Standard
