|
|
|
|
|
Engine |
Maximum Gross Power |
110 HP |
- |
- |
- |
Rated Net Power - Rated Engine Speed |
2200 r/min |
- |
- |
- |
Maximum Gross Power - Rated Engine Speed |
1800 r/min |
- |
- |
- |
Rated Net Power - SAE J1349 |
99 HP |
- |
- |
- |
Maximum Gross Power - ISO 14396 (metric) |
112 HP |
- |
- |
- |
Rated Net Power - ISO 9249 |
98 HP |
- |
- |
- |
Maximum Gross Torque - SAE J1995 |
335 ft·lbf |
- |
- |
- |
Maximum Gross Torque - ISO 14396 |
332 ft·lbf |
- |
- |
- |
Maximum Net Torque - SAE J1349 |
329 ft·lbf |
- |
- |
- |
Maximum Net Torque - ISO 9249 |
327 ft·lbf |
- |
- |
- |
Displacement |
220 in³ |
4766 in³ |
1649.5 in³ |
12.5 L |
Bore |
3.85 in |
6.7 in |
5.4 in |
- |
Stroke |
4.72 in |
8.5 in |
6 in |
- |
Engine Model |
Cat C3.6 |
Cat® 3516E |
C27 Cat® |
Cat C13 |
Emissions |
Engine meets Tier 4 Final/Stage V emission standards. |
U.S. EPA Tier 4 Final/EU Stage V or
U.S. EPA Tier 1 equivalent |
U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent |
- |
Note |
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
- |
- |
- |
Maximum Gross Power - ISO 14396 |
110 HP |
- |
- |
- |
Engine Power - ISO 14396 |
- |
1847 HP |
752 HP |
- |
Gross Power - SAE J1995 |
- |
1870 HP |
766 HP |
- |
Net Power - SAE J1349 - Standard Ambient |
- |
1739 HP |
699 HP |
- |
Net Power - SAE J1349 - High Ambient |
- |
1696 HP |
648 HP |
- |
Peak Torque - 1,200 rpm - SAE J1995 |
- |
8549 lb/ft |
- |
- |
Torque Rise |
- |
39% |
18 % |
- |
Note (1) |
- |
The power ratings apply when tested under the reference conditions for the specified standard. |
- |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
Note (2) |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
Note (3) |
- |
The gross power advertised is with the fan at maximum speed. |
- |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
Rated Speed |
- |
- |
1,800/min |
- |
Peak Torque - 1,200 rpm |
- |
- |
2624 lb/ft |
- |
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
- |
- |
393 HP |
Gross Torque @ 1,200 rpm – SAE J1995:2014 |
- |
- |
- |
1627 lb/ft |
Engine Torque @ 1,200 rpm – ISO 14396:2002 |
- |
- |
- |
1612 lb/ft |
Gross Power @ 1,700 rpm – SAE J1995:2014 |
- |
- |
- |
425 HP |
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
- |
- |
1539 lb/ft |
Engine Power @ 1,700 rpm – ISO 14396:2002 |
- |
- |
- |
429 HP |
Weights |
Operating Weight |
19103 lb |
- |
- |
66877 lb |
Note |
- |
- |
- |
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s |
Buckets |
Bucket Capacities |
1.3-3.5 m3 (1.7-4.6 yd3) |
- |
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
- |
Bucket Capacities - General Purpose |
1.3-1.9 m³ (1.7-2.5 yd³) |
- |
- |
- |
Bucket Capacities - Light Material |
2.5-3.5 m³ (3.3-4.6 yd³) |
- |
- |
- |
Sustainability |
Recyclability |
95% |
- |
- |
- |
Cab |
ROPS |
ISO 3471:2008 |
- |
- |
- |
FOPS |
ISO 3449:2005 |
- |
- |
- |
Note (4) |
*The measurements were conducted with the cab doors and windows closed. |
- |
- |
- |
Note (2) |
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). |
- |
- |
- |
Note (3) |
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). |
- |
- |
- |
Note (1) |
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
- |
- |
- |
Service Refill Capacities |
Cooling System |
5.7 gal (US) |
- |
54.9 gal (US) |
13.7 gal (US) |
Fuel Tank |
43.6 gal (US) |
- |
294.3 gal (US) |
112.5 gal (US) |
Note |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
- |
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l |
- |
Axles - Rear Center Differential |
2 gal (US) |
- |
- |
- |
Hydraulic System - Including Tank |
25.9 gal (US) |
- |
- |
- |
Diesel Exhaust Fluid (DEF) Tank |
4.8 gal (US) |
- |
- |
- |
Engine Crankcase |
2.6 gal (US) |
- |
20 gal (US) |
- |
Hydraulic Tank |
14.5 gal (US) |
- |
- |
40.4 gal (US) |
Transmission |
0.8 gal (US) |
- |
29.1 gal (US) |
20.3 gal (US) |
Axles - Front Center Differential |
2 gal (US) |
- |
- |
- |
Differential - Final Drives - Front |
- |
- |
71.6 gal (US) |
22.2 gal (US) |
Differential - Final Drives - Rear |
- |
- |
68.9 gal (US) |
22.4 gal (US) |
Hydraulic System Factory Fill |
- |
- |
210 gal (US) |
- |
Hydraulic Tank - Implement and Hydraulic Fan |
- |
- |
68.9 gal (US) |
- |
Hydraulic Tank - Steering and Braking |
- |
- |
34.9 gal (US) |
- |
Crankcase |
- |
- |
- |
9.8 gal (US) |
DEF Tank |
- |
- |
- |
5.5 gal (US) |
Steering |
Maximum Flow - Steering Pump |
22 gal/min |
- |
- |
- |
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left |
3.75 turns |
- |
- |
- |
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed |
2.8 s |
- |
- |
- |
Maximum Working Pressure - Steering Pump |
3263 psi |
- |
- |
- |
Steering Articulation Angle - Each Direction |
40 ° |
- |
- |
- |
Loader Hydraulic System |
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure |
3046 psi |
- |
- |
- |
Maximum Flow - Implement Pump |
39 gal/min |
- |
- |
- |
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard |
24 gal/min |
- |
- |
- |
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure |
3046 psi |
- |
- |
- |
Hydraulic Cycle Time - Total Cycle Time |
12.5 s |
- |
- |
- |
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift |
5.2 s |
- |
- |
- |
Maximum Flow - Implement Pump - 4th Function, Maximum Flow |
24 gal/min |
- |
- |
- |
Hydraulic Cycle Time - Dump, at Maximum Reach |
1.4 s |
- |
- |
- |
Relief Pressure - Tilt Cylinder |
4931 psi |
- |
- |
- |
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High |
32 gal/min |
- |
- |
- |
Maximum Working Pressure - Implement Pump |
4061 psi |
- |
- |
- |
Hydraulic Cycle Time - Rackback |
2.2 s |
- |
- |
- |
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level |
3.7 s |
- |
- |
- |
Transmission |
Note |
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
Travel speeds based on 58/85-57 tires. |
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. |
Forward and Reverse - Speed Range 3 |
25 mile/h |
- |
- |
- |
Forward and Reverse - Speed Range 1* |
6.3 mile/h |
- |
- |
- |
Forward and Reverse - Speed Range 2* |
12.5 mile/h |
- |
- |
- |
Transmission Type |
- |
Cat Planetary Power Shift |
Cat planetary power shift |
- |
Forward - 1 |
- |
4.6 mile/h |
4.5 mile/h |
4.3 mile/h |
Forward - 2 |
- |
8 mile/h |
8.3 mile/h |
8.3 mile/h |
Forward - 3 |
- |
13.6 mile/h |
14.2 mile/h |
14.6 mile/h |
Reverse - 1 |
- |
5 mile/h |
4.9 mile/h |
4.8 mile/h |
Reverse - 2 |
- |
8.8 mile/h |
9.1 mile/h |
9.4 mile/h |
Reverse - 3 |
- |
14.9 mile/h |
15.5 mile/h |
16.7 mile/h |
Direct Drive - Forward 1 |
- |
Lock-up disables |
Lock-up disabled |
- |
Direct Drive - Forward 2 |
- |
8.7 mile/h |
8.5 mile/h |
- |
Direct Drive - Forward 3 |
- |
15.2 mile/h |
15.2 mile/h |
- |
Direct Drive - Reverse 1 |
- |
Lock-up disables |
5.4 mile/h |
- |
Direct Drive - Reverse 2 |
- |
9.6 mile/h |
9.6 mile/h |
- |
Direct Drive - Reverse 3 |
- |
16.8 mile/h |
16.4 mile/h |
- |
Forward - 4 |
- |
- |
- |
24.5 mile/h |
Reverse - 4 |
- |
- |
- |
24.5 mile/h |
Tires |
Other Choices Include |
17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid |
- |
- |
- |
Note (1) |
Other tire choices are available. Contact your Cat dealer for details. |
- |
- |
- |
Standard Size |
17.5 R25 L2 XTLA |
- |
- |
- |
Note (3) |
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
- |
- |
- |
Note (2) |
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
- |
- |
- |
Axles |
Rear |
Oscillating ±11 degrees; Locking differential (Standard) |
Trunnion |
Trunnion |
- |
Front |
Fixed; Locking differential (standard) |
Fixed |
Fixed |
- |
Oscillation Angle |
- |
9° |
8.5° |
- |
Operating Specifications |
Operating Weight - Standard |
- |
543772 lb |
- |
- |
Bucket Capacity Range |
- |
17.2-43.6 m3 (22.3-57 yd3) |
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
- |
Operating Weight - High Lift |
- |
547675 lb |
- |
- |
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) |
- |
60 ton (US) |
- |
- |
Rated Payload - Standard Lift (Moderate to High Digging Resistance) |
- |
50 ton (US) |
- |
- |
Rated Payload - High Lift (Low to Moderate Digging Resistance) |
- |
55 ton (US) |
- |
- |
Rated Payload - High Lift (Moderate to High Digging Resistance) |
- |
50 ton (US) |
- |
- |
Note |
- |
*Please contact your local dealer to determine if your application is suitable for this increased rated payload. |
- |
- |
Cat Truck Match - Standard |
- |
785/789 |
773-775 |
- |
Cat Truck Match - High Lift |
- |
789/793/794 |
775-777 |
- |
Operating Weight |
- |
- |
178517 lb |
- |
Rated Payload - Standard |
- |
- |
17.5 ton (US) |
- |
Rated Payload - High Lift |
- |
- |
17.5 ton (US) |
- |
Breakout Force |
- |
- |
- |
51008 lb |
Note (1) |
- |
- |
- |
For a machine configuration as defined under �Weight.� |
Note (2) |
- |
- |
- |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Static Tipping Load - Full 40° Turn - No Tire Deflection |
- |
- |
- |
20965 kg |
Static Tipping Load - Full 40° Turn - With Tire Deflection |
- |
- |
- |
43432 lb |
Complete System Fill |
Fuel Tank - Standard |
- |
856 gal (US) |
- |
- |
Fuel Tank - With 24 hr Attachment |
- |
1414 gal (US) |
- |
- |
Cooling System |
- |
138 gal (US) |
- |
- |
Engine Crankcase |
- |
76 gal (US) |
- |
- |
Transmission |
- |
110 gal (US) |
- |
- |
Differential - Final Drives - Front |
- |
220 gal (US) |
- |
- |
Differential - Final Drives - Rear |
- |
200 gal (US) |
- |
- |
Hydraulic Tank - Implement and Hydraulic Fan |
- |
270 gal (US) |
- |
- |
Hydraulic Tank - Steering and Braking |
- |
100 gal (US) |
- |
- |
Oil Renewal System (ORS)* |
- |
20 gal (US) |
- |
- |
Note |
- |
*Not available on Tier 4 Final/Stage V machines. Not available in all regions. |
- |
- |
Cooling System |
Ambient Capability Hydraulically Driven Demand Fan - Standard |
- |
109.4 °F |
- |
- |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) |
- |
131 °F |
- |
- |
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) |
- |
127.4 °F |
- |
- |
Sound Performance - Standard |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
- |
74 dB(A) |
- |
- |
Machine Sound Level (ISO 6395:2008) |
- |
119 dB(A) |
115 dB(A) |
- |
Note |
- |
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
- |
- |
Operator Sound Level (ISO 6396:2008) |
- |
- |
65.5 dB(A) |
- |
Sound Performance - Suppression |
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent |
- |
73 dB(A) |
- |
- |
Machine Sound Level (ISO 6395:2008) |
- |
117 dB(A) |
113 dB(A) |
- |
Note |
- |
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c |
- |
- |
Operator Sound Level (ISO 6396:2008) |
- |
- |
65.5 dB(A) |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
Pilot, Load Sensing |
Pilot, load sensing |
- |
Steering System - Pump |
- |
Piston, Variable Displacement |
Piston, variable displacement |
- |
Total Steering Angle |
- |
80 degrees |
70° |
- |
Steering Cycle Times - Low Idle |
- |
7.6 s |
- |
- |
Steering Cycle Times - High Idle |
- |
4.3 s |
- |
- |
Maximum Flow at 1,400 rpm |
- |
- |
96.2 gal/min |
- |
Relief Valve Setting - Steering |
- |
- |
5004 psi |
- |
Dimensions - Standard Lift - Approximate |
B-Pin Height - Maximum Lift |
- |
28.8 ft |
- |
- |
Clearance at Maximum Lift |
- |
19.8 ft |
- |
- |
Dump Angle at Maximum Lift |
- |
–50.0 degrees |
- |
- |
Front Axle Centerline to Bucket Tip |
- |
21.9 ft |
- |
- |
Ground to Bumper Clearance |
- |
4.4 ft |
- |
- |
Ground to Center of Axles |
- |
6 ft |
- |
- |
Ground to Lower Hitch Clearance |
- |
2.9 ft |
- |
- |
Ground to Top of Exhaust Stacks |
- |
23.2 ft |
- |
- |
Ground to Top of Hood |
- |
18.6 ft |
- |
- |
Ground to Top of ROPS |
- |
23.4 ft |
- |
- |
Maximum Overall Height - Bucket Raised |
- |
39.3 ft |
- |
- |
Maximum Overall Length |
- |
64.6 ft |
- |
- |
Note |
- |
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
- |
- |
Rack Angle at Maximum Lift |
- |
59.5 degrees |
- |
- |
Rack Back Angle - Carry |
- |
47.7 degrees |
- |
- |
Rack Back Angle - Ground Level |
- |
39.7 degrees |
- |
- |
Reach - Maximum Lift |
- |
9.6 ft |
- |
- |
Rear Axle - Centerline to Bumper |
- |
20.4 ft |
- |
- |
Tread Width |
- |
14.1 ft |
- |
- |
Wheel Base |
- |
22.3 ft |
- |
- |
Width - Over Tires - With Bulge |
- |
18.8 ft |
- |
- |
Dimensions - High Lift - Approximate |
B-Pin Height - Maximum Lift |
- |
31.6 ft |
- |
- |
Clearance at Maximum Lift |
- |
22.6 ft |
- |
- |
Dump Angle at Maximum Lift |
- |
–50.0 degrees |
- |
- |
Front Axle Centerline to Bucket Tip |
- |
24.2 ft |
- |
- |
Ground to Bumper Clearance |
- |
4.4 ft |
- |
- |
Ground to Center of Axles |
- |
6 ft |
- |
- |
Ground to Lower Hitch Clearance |
- |
2.9 ft |
- |
- |
Ground to Top of Exhaust Stacks |
- |
23.2 ft |
- |
- |
Ground to Top of Hood |
- |
18.6 ft |
- |
- |
Ground to Top of ROPS |
- |
23.4 ft |
- |
- |
Maximum Overall Height - Bucket Raised |
- |
42.1 ft |
- |
- |
Maximum Overall Length |
- |
66.9 ft |
- |
- |
Note |
- |
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. |
- |
- |
Rack Angle at Maximum Lift |
- |
59.4 degrees |
- |
- |
Rack Back Angle - Carry |
- |
53.5 degrees |
- |
- |
Rack Back Angle - Ground Level |
- |
45 degrees |
- |
- |
Reach - Maximum Lift |
- |
9.4 ft |
- |
- |
Rear Axle - Centerline to Bumper |
- |
20.4 ft |
- |
- |
Tread Width |
- |
14.1 ft |
- |
- |
Wheel Base |
- |
22.3 ft |
- |
- |
Width - Over Tires - With Bulge |
- |
18.8 ft |
- |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
Positive Flow Control |
Positive flow control |
- |
Lift/Tilt System - Pump |
- |
Variable Displacement Piston |
- |
- |
Maximum Flow at 1,700 rpm Engine Speed |
- |
541 gal/min |
- |
- |
Relief Valve Setting - Lift/Tilt |
- |
5004 psi |
4786 psi |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
370 × 1713 mm (14.6 × 67.4 in) |
235 mm × 1287 mm (9.3 in × 50.7 in) |
- |
Cylinders, Double Acting - Tilt, Bore and Stroke |
- |
310 × 1086 mm (12.2 × 42.8 in) |
292.1 mm × 820 mm (11.5 in × 32.3 in) |
- |
Pilot System |
- |
Open Loop and Pressure Reducing |
Open loop and pressure reducing |
- |
Lift/Tilt System |
- |
- |
Variable displacement piston |
- |
Maximum Flow at 1,800 rpm (1) |
- |
- |
240 gal/min |
- |
Relief Valve Setting - Main |
- |
- |
507 psi |
- |
Hydraulic Cycle Times |
Rack Back |
- |
4.9 s |
4.3 s |
- |
Raise |
- |
12.6 s |
8.2 s |
- |
Dump |
- |
3.1 s |
2.9 s |
- |
Lower Float Down |
- |
4.2 s |
3.6 s |
- |
Lower |
- |
- |
3.7 s |
- |
Total Hydraulic Cycle Time - Empty Bucket |
- |
- |
13.8 s |
- |
Brakes |
Brakes |
- |
ISO 3450:2011 |
ISO 3450: 2011 |
- |
Air Conditioning System |
Air Conditioning |
- |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
Bucket Capacities |
Bucket Range |
- |
- |
- |
4.0-14.5 m³ 5.25-19 yd³ |
Sound |
Note (1) |
- |
- |
- |
** For machines in European Union countries and in countries that adopt the �EU Directives.� |
Note (2) |
- |
- |
- |
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
- |
- |
- |
109 |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
- |
- |
- |
72 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
- |
- |
- |
112 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
- |
- |
- |
78 |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
- |
- |
- |
72 dB(A) |
Hydraulic System |
Implement System - Maximum Operating Pressure |
- |
- |
- |
4975 psi |
Implement System - Maximum Pump Output at 2,250 rpm |
- |
- |
- |
119 gal/min |
Dimensions |
Note |
- |
- |
- |
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
Dimensions - High Lift |
Centerline of Rear Axle to Edge of Counterweight |
- |
- |
- |
8.9 ft |
Centerline of Rear Axle to Hitch |
- |
- |
- |
6.3 ft |
Ground Clearance |
- |
- |
- |
1.5 ft |
Height - Top of Exhaust Pipe |
- |
- |
- |
12.5 ft |
Height - Top of Hood |
- |
- |
- |
10.1 ft |
Height - Top of ROPS |
- |
- |
- |
12.7 ft |
Hinge Pin Height at Carry |
- |
- |
- |
2.2 ft |
Hinge Pin Height at Maximum Lift |
- |
- |
- |
15.7 ft |
Lift Arm Clearance at Maximum Lift |
- |
- |
- |
13.6 ft |
Overall Length - Without Bucket |
- |
- |
- |
27.5 ft |
Tread Width |
- |
- |
- |
8 ft |
Wheel Base |
- |
- |
- |
12.6 ft |
Rack Back at Ground |
- |
- |
- |
40 degrees |
Width over Tires (Loaded) |
- |
- |
- |
10.9 ft |
Rack Back - Carry Height |
- |
- |
- |
50 degrees |
Rack Back - Maximum Lift |
- |
- |
- |
61 degrees |
Dimensions - Standard Lift |
Centerline of Rear Axle to Hitch |
- |
- |
- |
6.3 ft |
Ground Clearance |
- |
- |
- |
456 mm |
Height - Top of Exhaust Pipe |
- |
- |
- |
3764 mm |
Height - Top of Hood |
- |
- |
- |
3064 mm |
Height - Top of ROPS |
- |
- |
- |
3829 mm |
Hinge Pin Height at Carry |
- |
- |
- |
2.2 ft |
Hinge Pin Height at Maximum Lift |
- |
- |
- |
4554 mm |
Lift Arm Clearance at Maximum Lift |
- |
- |
- |
3881 mm |
Overall Length - Without Bucket |
- |
- |
- |
8155 mm |
Tread Width |
- |
- |
- |
8 ft |
Wheel Base |
- |
- |
- |
3800 mm |
Rack Back at Ground |
- |
- |
- |
40 degrees |
Centerline of Rear Axle to Edge of Counterweight |
- |
- |
- |
2661 mm |
Width over Tires (Loaded) |
- |
- |
- |
10.9 ft |
Rack Back - Carry Height |
- |
- |
- |
50 degrees |
Rack Back - Maximum Lift |
- |
- |
- |
61 degrees |