CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    910 Compact Wheel Loader
    View Product
    982
    View Product Remove
    982 XE
    View Product Remove
    972 XE
    View Product Remove

    Engine
    Maximum Gross Power 110 HP - - -
    Rated Net Power - Rated Engine Speed 2200 r/min - - -
    Maximum Gross Power - Rated Engine Speed 1800 r/min - - -
    Rated Net Power - SAE J1349 99 HP - - -
    Maximum Gross Power - ISO 14396 (metric) 112 HP - - -
    Rated Net Power - ISO 9249 98 HP - - -
    Maximum Gross Torque - SAE J1995 335 ft·lbf - - -
    Maximum Gross Torque - ISO 14396 332 ft·lbf - - -
    Maximum Net Torque - SAE J1349 329 ft·lbf - - -
    Maximum Net Torque - ISO 9249 327 ft·lbf - - -
    Displacement 220 in³ - 12.5L 9.3 L
    Bore 3.85 in - - -
    Stroke 4.72 in - - -
    Engine Model Cat C3.6 Cat C13 Cat C13 Cat C9.3B
    Emissions Engine meets Tier 4 Final/Stage V emission standards. - - -
    Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. - - -
    Maximum Gross Power - ISO 14396 110 HP - - -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - 404 HP 404 HP -
    Note (1) - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
    Note (2) - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Note (3) - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1636 lb/ft 1636 lb/ft 1388 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1620 lb/ft 1620 lb/ft 1375 lb/ft
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - 1515 lb/ft 1515 lb/ft -
    Engine Power @ 1,700 rpm – ISO 14396:2002 - 432 HP 432 HP -
    Gross Power @ 1,700 rpm – SAE J1995:2014 - 436 HP 436 HP -
    Engine Power @ 1,600 rpm - ISO 14396:2002 - - - 339 HP
    Gross Power @ 1,600 rpm - SAE J1995:2014 - - - 343 HP
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 - - - 316 HP
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 - - - 1287 ft-lb

    Weights
    Operating Weight 18102 lb 78264 lb 78264 lb 54858 lb
    Note - Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second

    Buckets
    Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3) - - -
    Bucket Capacities - General Purpose 1.3-1.9 m³ (1.7-2.5 yd³) - - -
    Bucket Capacities - Light Material 2.5-3.5 m³ (3.3-4.6 yd³) - - -

    Sustainability
    Recyclability 95% - - -

    Cab
    ROPS ISO 3471:2008 - - -
    FOPS ISO 3449:2005 - - -
    Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A). - - -
    Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A). - - -
    Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. - - -
    Note (4) *The measurements were conducted with the cab doors and windows closed. - - -

    Service Refill Capacities
    Cooling System 5.7 gal (US) 13.7 gal (US) 13.7 gal (US) 17.4 gal (US)
    Fuel Tank 43.6 gal (US) 112.5 gal (US) 112.5 gal (US) 80.1 gal (US)
    Hydraulic System - Including Tank 25.9 gal (US) - - -
    Engine Crankcase 2.6 gal (US) - - -
    Hydraulic Tank 14.5 gal (US) 40.4 gal (US) 40.4 gal (US) 30.1 gal (US)
    Transmission 0.8 gal (US) 20.3 gal (US) 20.3 gal (US) 15.5 gal (US)
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - - -
    Axles - Front Center Differential 2 gal (US) - - -
    Axles - Rear Center Differential 2 gal (US) - - -
    Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US) - - -
    Crankcase - 9.8 gal (US) 9.8 gal (US) 6.1 gal (US)
    DEF Tank - 5.5 gal (US) 5.5 gal (US) 6.9 gal (US)
    Differential - Final Drives - Front - 24.3 gal (US) 24.3 gal (US) 15.1 gal (US)
    Differential - Final Drives - Rear - 24.3 gal (US) 24.3 gal (US) 15.1 gal (US)

    Steering
    Maximum Working Pressure - Steering Pump 2683 psi - - -
    Steering Articulation Angle - Each Direction 40 ° - - -
    Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 3.2 s - - -
    Maximum Flow - Steering Pump 17 gal/min - - -
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns - - -

    Loader Hydraulic System
    Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s - - -
    Hydraulic Cycle Time - Total Cycle Time 12.5 s - - -
    Maximum Working Pressure - Implement Pump 3408 psi - - -
    Relief Pressure - Tilt Cylinder 4931 psi - - -
    Hydraulic Cycle Time - Rackback 2.2 s - - -
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi - - -
    Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s - - -
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi - - -
    Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min - - -
    Maximum Flow - Implement Pump - 3rd Function, Maximum Flow 24 gal/min - - -
    Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s - - -
    Maximum Flow - Implement Pump 32 gal/min - - -

    Transmission
    Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius.
    Forward and Reverse - Speed Range 3 25 mile/h - - -
    Forward and Reverse - Speed Range 2* 12.5 mile/h - - -
    Forward and Reverse - Speed Range 1* 6.3 mile/h - - -
    Forward - 1 - 3.9 mile/h 3.9 mile/h 4.1 mile/h
    Forward - 2 - 7.4 mile/h 7.3 mile/h 8.4 mile/h
    Forward - 3 - 13.1 mile/h 13 mile/h 15 mile/h
    Forward - 4 - 23.3 mile/h 24.5 mile/h 24.5 mile/h
    Reverse - 1 - 4.3 mile/h 4.4 mile/h 4.5 mile/h
    Reverse - 2 - 8.5 mile/h 8.4 mile/h 9.2 mile/h
    Reverse - 3 - 15 mile/h 17.4 mile/h 16.5 mile/h
    Reverse - 4 - 24.5 mile/h - 24.5 mile/h

    Tires
    Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. - - -
    Standard Size 15.5 R25 L2 XTLA - - -
    Other Choices Include 17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow - - -
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. - - -
    Note (1) Other tire choices are available. Contact your Cat dealer for details. - - -

    Axles
    Front Fixed; Locking differential (standard) - - -
    Rear Oscillating ±11 degrees; Locking differential (Standard) - - -

    Bucket Capacities
    Bucket Range - 4.8-17.2 m³ 6.25-22.5 yd³ 4.8-17.2 m³ 6.25-22.5 yd³ 2.8-14.0 m³ 3.75-18.25 yd³

    Sound
    Note (1) - ** For machines in European Union countries and in countries that adopt the �EU Directives.� * For machines in European Union countries and in countries that adopt the “EU Directives.” ** For machines in European Union countries and in countries that adopt the EU Directives.
    Note (2) - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� European Union Directive “2000/14/EC” as amended by “2005/88/EC.” ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 109 107 108
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) 70 dB(A) 69 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 112 dB(A) 110 dB(A) 109 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 78 75 76
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) 70 dB(A) 70 dB(A)
    With Cooling Fan Speed at Maximum Value - Note - - - Distance of 15 m (49.2 ft), moving forward in second gear ratio.

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).

    Operating Specifications
    Breakout Force - 59060 lbf 59060 lbf 44072 lb
    Note (1) - For a machine configuration as defined under �Weight.� For a machine configuration as defined under Weight. For a machine configuration as defined under Weight.
    Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - 22418 kg 22418 kg 17505 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - 46526 lb 46526 lb 35919 lb

    Hydraulic System
    Implement System - Maximum Operating Pressure - 4975 psi 4975 psi 4496 psi
    Implement System - Maximum Pump Output at 2,250 rpm - 119 gal/min 119 gal/min 99 gal/min
    Hydraulic Cycle Time - Total - - 10.1 seconds 10.7 seconds

    Dimensions
    Note - All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - 9.4 ft 9.4 ft 8.1 ft
    Centerline of Rear Axle to Hitch - 6.3 ft 6.3 ft 5.1 ft
    Ground Clearance - 1.4 ft 1.4 ft 1.4 ft
    Height - Top of Exhaust Pipe - 12.4 ft 12.4 ft 11.8 ft
    Height - Top of Hood - 10 ft 10 ft 9.5 ft
    Height - Top of ROPS - 12.6 ft 12.6 ft 11.1 ft
    Hinge Pin Height at Carry - 2.11 ft 2.11 ft 2.6 ft
    Hinge Pin Height at Maximum Lift - 16.1 ft 16.1 ft 15.9 ft
    Lift Arm Clearance at Maximum Lift - 13.4 ft 13.4 ft 13.8 ft
    Overall Length - Without Bucket - 29.11 ft 29.11 ft 26.6 ft
    Tread Width - 8.4 ft 8.4 ft 7.3 ft
    Wheel Base - 12.6 ft 12.6 ft 11.8 ft
    Width over Tires (Loaded) - 11.5 ft 11.5 ft 9.11 ft
    Rack Back at Ground - - - 37 degrees
    Rack Back - Maximum Lift - - - 71 degrees
    Rack Back - Carry Height - - - 49 degrees

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.9 ft 8.95 ft 8 ft
    Centerline of Rear Axle to Hitch - 6.3 ft 6.3 ft 5.1 ft
    Ground Clearance - 428 mm 428 mm 420 mm
    Height - Top of Exhaust Pipe - 3736 mm 3736 mm 3527 mm
    Height - Top of Hood - 3036 mm 3036 mm 2846 mm
    Height - Top of ROPS - 3801 mm 3801 mm 3589 mm
    Hinge Pin Height at Carry - 2.7 ft 2.7 ft 2.2 ft
    Hinge Pin Height at Maximum Lift - 4741 mm 4741 mm 4464 mm
    Lift Arm Clearance at Maximum Lift - 3902 mm 3902 mm 3843 mm
    Overall Length - Without Bucket - 8597 mm 8597 mm 7731 mm
    Tread Width - 8.4 ft 8.4 ft 7.3 ft
    Wheel Base - 3800 mm 3800 mm 3550 mm
    Width over Tires (Loaded) - 11.5 ft 11.5 ft 9.11 ft
    Rack Back - Carry Height - - - 49 degrees
    Rack Back at Ground - - - 39 degrees
    Rack Back - Maximum Lift - - - 56 degrees
    Add a Similar Product: