Compare Equipment Go Back
 AD30 Underground Mining Truck |
 R2900G Underground Mining Loader |
 R1300G Underground Mining Loader |
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® C15 | Cat® C15 | Cat® 3306B DITA |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 401 HP | 401 HP | - |
| Engine Power - VR Engine - ISO 14396:2002 | 401 HP | 401 HP | - |
| Bore | 5.4 in | 5.4 in | 4.75 in |
| Stroke | 6.8 in | 6.8 in | 6 in |
| Displacement | 928 in³ | 927.9 in³ | 640.75 in³ |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). | No engine derating required up to 591 m (1,938 ft) altitude. | Engine derate will commence at an altitude of 4500 m (14,763.7 ft). |
| Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
Optional Ventilation Reduction Package available. | - |
| Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. | - |
| Engine Power - ISO 14396:2002 | - | - | 157 HP |
Operating Specifications |
|||
| Nominal Payload Capacity | 66139 lb | 37920 lb | 14991 lb |
| Gross Machine Mass | 132300 lb | 155095 lb | 65482 lb |
| Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) | - | - |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | - | 88015 lb | 45360 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | - | 75109 lb | 39397 lb |
| Breakout Force - SAE | - | 60298 lb | 26504 lb |
Body Capacities |
|||
| Body 1 | 14.8 yd³ | - | - |
| Body 2 - Standard Body | 18.8 yd³ | - | - |
| Body 3 | 22.9 yd³ | - | - |
| Wide Body | 21.9 yd³ | - | - |
| Ejector Body (1) | 19.9 yd³ | - | - |
| Ejector Body (2) | 21.9 yd³ | - | - |
| Note | Heaped SAE 2:1. | - | - |
Weight Distribution |
|||
| Empty - Front Axle | 67.50% | - | - |
| Empty - Rear Axle | 32.50% | - | - |
| Loaded - Front Axle | 44.20% | - | - |
| Loaded - Rear Axle | 55.80% | - | - |
Weights |
|||
| Empty | 63647 lb | - | - |
| Empty - Front Axle | 42944 lb | - | - |
| Empty - Rear Axle | 20704 lb | - | - |
| Loaded | 132277 lb | - | - |
| Loaded - Front Axle | 58451 lb | - | - |
| Loaded - Rear Axle | 73826 lb | - | - |
| Operating Mass* | - | 110692 lb | 45691 lb |
| Operating Mass* - Front Axle | - | 50832 lb | 16810 lb |
| Operating Mass* - Rear Axle | - | 59860 lb | 28881 lb |
| Operating Mass + Rated Payload* | - | 148611 lb | 60682 lb |
| Operating Mass + Rated Payload* - Front Axle | - | 110716 lb | 41105 lb |
| Operating Mass + Rated Payload* - Rear Axle | - | 37895 lb | 19577 lb |
| Note | - | *Calculated Weight. | *Calculated weights. |
Body Hoist |
|||
| Raise | 10.5 s | - | - |
| Lower | 11.2 s | - | - |
| Total Cycle Time | 21.7 s | - | - |
Turning Dimensions |
|||
| Outside Clearance Radius | 337.4 in | 288.3 in | 225.1 in |
| Inner Clearance Radius | 198 in | 133.2 in | 111.2 in |
| Articulation Angle | 42.5 ° | 42.5° | 42.5° |
| Frame Oscillation | 10 Degrees | - | - |
| Axle Oscillation | - | 8° | 10° |
Transmission |
|||
| Forward - 1 | 3.9 mile/h | 3.4 mile/h | 2.8 mile/h |
| Forward - 2 | 7 mile/h | 6 mile/h | 4.8 mile/h |
| Forward - 3 | 12.9 mile/h | 10.7 mile/h | 9.3 mile/h |
| Forward - 4 | 22.8 mile/h | 18.5 mile/h | 16.3 mile/h |
| Reverse - 1 | 4.4 mile/h | 4.1 mile/h | 2.8 mile/h |
| Note | Maximum travel speeds with standard 26.5 × R25 tires. | - | - |
| Reverse - 2 | - | 7.3 mile/h | 4.8 mile/h |
| Reverse - 3 | - | 13 mile/h | 9.2 mile/h |
| Reverse - 4 | - | 22 mile/h | 14.3 mile/h |
Service Refill Capacities |
|||
| Engine Crankcase - With Filter | 9 gal (US) | - | 6.6 gal (US) |
| Transmission | 18 gal (US) | 16.4 gal (US) | 11.9 gal (US) |
| Hydraulic Tank | 38 gal (US) | 37 gal (US) | 23.2 gal (US) |
| Cooling System | 20 gal (US) | 19.8 gal (US) | 17.7 gal (US) |
| Front Differential and Final Drives | 15 gal (US) | 31.4 gal (US) | 10 gal (US) |
| Rear Differential and Final Drives | 15 gal (US) | 33.5 gal (US) | 11.1 gal (US) |
| Fuel Tank | 108 gal (US) | - | 77.9 gal (US) |
| Engine Crankcase | - | 9 gal (US) | - |
| Front Differential and Final Drives - With Axle Oil Cooling System | - | 42 gal (US) | - |
| Rear Differential and Final Drives - With Axle Oil Cooling System | - | 44.1 gal (US) | - |
| Fuel Tank - Dual | - | 376.4 gal (US) | - |
Tires |
|||
| Tire Size | 26.5 × R25 | 29.5 × 29 | 17.5 × R25 |
Final Drives |
|||
| Differential Ratio | 3.38:1 | - | - |
| Final Drive Ratio | 4.76:1 | - | - |
| Total Reduction Ratio | 16.13:1 | - | - |
| Note | Fully floating axles. | - | - |
Standards |
|||
| Standards | ROPS/FOPS Certified Cab | - | ROPS/FOPS Certified Cab |
| Brakes | - | ISO 3450, AS2958.1, CAN-CSA424.30-M90 | - |
| Cab - FOPS | - | ISO 3449, SAE J231, AS2294.3, EN13627 | - |
| Cab - ROPS | - | ISO 3471, SAE J1040, AS2294.2, EN13510 | - |
Bucket Capacities |
|||
| Bucket Capacity | - | 6.3-8.9 m³ (8.2-11.6 yd³) | - |
| Dump Bucket - 1 | - | 8.2 yd³ | 3.2 yd³ |
| Dump Bucket - 2 | - | 9.4 yd³ | 3.7 yd³ |
| Dump Bucket - 3 | - | 10.9 yd³ | - |
| Dump Bucket - 4 | - | 11.6 yd³ | 4.4 yd³ |
| Dump Bucket - 3 - Standard Bucket | - | - | 4.1 yd³ |
| Ejector Bucket | - | - | 3.1 yd³ |
Hydraulic Cycle Times |
|||
| Raise | - | 9.2 s | 5 s |
| Dump | - | 3.4 s | 2 s |
| Lower, Empty, Float Down | - | 3.1 s | 2.3 s |
| Total Cycle Time | - | 15.7 s | 9.3 s |
