Compare Equipment Go Back
 AD30 Underground Mining Truck |
 R1700 Underground Mining Loader |
 R3000H Underground Mining Loader |
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® C15 | Cat® C13 | Cat® C15 |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 401 HP | 361 HP | 401 HP |
| Engine Power - VR Engine - ISO 14396:2002 | 401 HP | 361 HP | 401 HP |
| Bore | 5.4 in | - | 5.4 in |
| Stroke | 6.8 in | - | 6.8 in |
| Displacement | 928 in³ | - | 927.6 in³ |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. | All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica |
| Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications | No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. |
| Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. | Optional Ventilation Reduction package available. |
| Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | Optional Ventilation Reduction package available. | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
| Engine Power - Stage V Engine - ISO 14396:2002 | - | 345 HP | - |
| Note (6) | - | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. | - |
| Note (7) | - | Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. | - |
Operating Specifications |
|||
| Nominal Payload Capacity | 66139 lb | 33069 lb | 44092 lb |
| Gross Machine Mass | 132300 lb | - | 180779 lb |
| Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) | - | - |
| Gross Machine Mass - Loaded | - | 138316 lb | - |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | - | 83218 lb | 104199 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | - | 69635 lb | - |
| Breakout Force - Lift and Tilt | - | 53330 lb | - |
| Static Tipping Full Turn Ahead Lift Arms Horizontal | - | - | 88191 lb |
| Breakout Force - SAE | - | - | 61773 lb |
Body Capacities |
|||
| Body 1 | 14.8 yd³ | - | - |
| Body 2 - Standard Body | 18.8 yd³ | - | - |
| Body 3 | 22.9 yd³ | - | - |
| Wide Body | 21.9 yd³ | - | - |
| Ejector Body (1) | 19.9 yd³ | - | - |
| Ejector Body (2) | 21.9 yd³ | - | - |
| Note | Heaped SAE 2:1. | - | - |
Weight Distribution |
|||
| Empty - Front Axle | 67.50% | - | - |
| Empty - Rear Axle | 32.50% | - | - |
| Loaded - Front Axle | 44.20% | - | - |
| Loaded - Rear Axle | 55.80% | - | - |
Weights |
|||
| Empty | 63647 lb | - | - |
| Empty - Front Axle | 42944 lb | - | - |
| Empty - Rear Axle | 20704 lb | - | - |
| Loaded | 132277 lb | - | - |
| Loaded - Front Axle | 58451 lb | - | - |
| Loaded - Rear Axle | 73826 lb | - | - |
| Operating Mass* | - | 95189 lb | 128448 lb |
| Operating Mass* - Front Axle | - | 38358 lb | 54558 lb |
| Operating Mass* - Rear Axle | - | 56831 lb | 73853 lb |
| Operating Mass + Rated Payload* | - | 128258 lb | 172540 lb |
| Operating Mass + Rated Payload* - Front Axle | - | 91412 lb | 125187 lb |
| Operating Mass + Rated Payload* - Rear Axle | - | 36846 lb | 47316 lb |
| Note | - | *Calculated weights. | *Calculated weight. |
Body Hoist |
|||
| Raise | 10.5 s | - | - |
| Lower | 11.2 s | - | - |
| Total Cycle Time | 21.7 s | - | - |
Turning Dimensions |
|||
| Outside Clearance Radius | 337.4 in | 272 in | - |
| Inner Clearance Radius | 198 in | 123.5 in | - |
| Articulation Angle | 42.5 ° | 44° | 42.5 ° |
| Frame Oscillation | 10 Degrees | - | - |
| Axle Oscillation | - | 8° | 8 ° |
| Outside Clearance Radius** | - | - | 296.7 in |
| Inner Clearance Radius** | - | - | 127.8 in |
| Note | - | - | **Clearance dimensions are for reference only. |
Transmission |
|||
| Forward - 1 | 3.9 mile/h | 3 mile/h | 3 mile/h |
| Forward - 2 | 7 mile/h | 5.7 mile/h | 5.7 mile/h |
| Forward - 3 | 12.9 mile/h | 10.2 mile/h | 10.2 mile/h |
| Forward - 4 | 22.8 mile/h | 17.9 mile/h | 17.5 mile/h |
| Reverse - 1 | 4.4 mile/h | 3.7 mile/h | 4.1 mile/h |
| Note | Maximum travel speeds with standard 26.5 × R25 tires. | - | - |
| Reverse - 2 | - | 6.5 mile/h | 7.1 mile/h |
| Reverse - 3 | - | 11.6 mile/h | 12.7 mile/h |
| Reverse - 4 | - | 20.2 mile/h | 19.4 mile/h |
Service Refill Capacities |
|||
| Engine Crankcase - With Filter | 9 gal (US) | - | - |
| Transmission | 18 gal (US) | - | 16.4 gal (US) |
| Hydraulic Tank | 38 gal (US) | 35.7 gal (US) | 37 gal (US) |
| Cooling System | 20 gal (US) | 19.8 gal (US) | 19.8 gal (US) |
| Front Differential and Final Drives | 15 gal (US) | - | 31.4 gal (US) |
| Rear Differential and Final Drives | 15 gal (US) | - | 33.5 gal (US) |
| Fuel Tank | 108 gal (US) | - | 406.5 gal (US) |
| Engine Crankcase | - | 9.8 gal (US) | 9 gal (US) |
| Front Differential and Final Drives - With Axle Oil Cooling System | - | - | 42 gal (US) |
| Rear Differential and Final Drives - With Axle Oil Cooling System | - | - | 44.1 gal (US) |
Tires |
|||
| Tire Size | 26.5 × R25 | 26.5R25 | 35/65 R33 |
Final Drives |
|||
| Differential Ratio | 3.38:1 | - | - |
| Final Drive Ratio | 4.76:1 | - | - |
| Total Reduction Ratio | 16.13:1 | - | - |
| Note | Fully floating axles. | - | - |
Standards |
|||
| Standards | ROPS/FOPS Certified Cab | - | Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab |
Hydraulic Cycle Times |
|||
| Raise | - | 6.8 s | 8.8 s |
| Dump | - | 3.3 s | 1.85 s |
| Lower, Empty, Float Down | - | 2.9 s | 3.54 s |
| Total Cycle Time | - | 13.2 s | 14.2 s |
Bucket Capacities |
|||
| Bucket Capacities | - | 5.7-8.6 m³ (7.5-11.2 yd³) | 8.9-11.6 m³ (11.6-15.2 yd³) |
| Dump Bucket - 1 - Standard Bucket | - | 7.5 yd³ | 11.6 yd³ |
| Dump Bucket - 2 | - | 8 yd³ | 12.4 yd³ |
| Dump Bucket - 3 | - | 8.6 yd³ | 13.7 yd³ |
| Dump Bucket - 4 | - | 9.4 yd³ | - |
| Dump Bucket - 5 | - | 9.8 yd³ | - |
| Dump Bucket - 6 | - | 10.5 yd³ | - |
| Light Material Bucket | - | 11.2 yd³ | 15.2 yd³ |
| Ejector Bucket | - | 7.6 yd³ | - |
| Bolt Together Bucket (1) | - | 8.9 yd³ | - |
| Bolt Together Bucket (2) | - | 9.8 yd³ | - |
Service Capacities - Not Refill |
|||
| Fuel System | - | 128.4 gal (US) | - |
| DEF Tank | - | 7.1 gal (US) | - |
| Front Differential and Final Drive | - | 39 gal (US) | - |
| Rear Differential and Final Drive | - | 37.2 gal (US) | - |
| Transmission | - | 14.2 gal (US) | - |
