Compare Equipment Go Back
 AD30 Underground Mining Truck |
 R1600H Underground Mining Loader |
 R1300G Underground Mining Loader |
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® C15 | Cat® C11 | Cat® 3306B DITA |
| Engine Power - Tier 3 Engine - ISO 14396:2002 | 401 HP | 271 HP | - |
| Engine Power - VR Engine - ISO 14396:2002 | 401 HP | 271 HP | - |
| Bore | 5.4 in | 5.1 in | 4.75 in |
| Stroke | 6.8 in | 5.5 in | 6 in |
| Displacement | 928 in³ | 680.4 in³ | 640.75 in³ |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). | No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. | Engine derate will commence at an altitude of 4500 m (14,763.7 ft). |
| Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
Optional Ventilation Reduction package available. | - |
| Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. | - |
| Engine Power - ISO 14396:2002 | - | - | 157 HP |
Operating Specifications |
|||
| Nominal Payload Capacity | 66139 lb | 22487 lb | 14991 lb |
| Gross Machine Mass | 132300 lb | 97453 lb | 65482 lb |
| Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) | - | - |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | - | 57110 lb | 45360 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | - | 46067 lb | 39397 lb |
| Breakout Force - Tilt (ISO) | - | 39524 lb | - |
| Breakout Force - Lift (ISO) | - | 42333 lb | - |
| Breakout Force - SAE | - | - | 26504 lb |
Body Capacities |
|||
| Body 1 | 14.8 yd³ | - | - |
| Body 2 - Standard Body | 18.8 yd³ | - | - |
| Body 3 | 22.9 yd³ | - | - |
| Wide Body | 21.9 yd³ | - | - |
| Ejector Body (1) | 19.9 yd³ | - | - |
| Ejector Body (2) | 21.9 yd³ | - | - |
| Note | Heaped SAE 2:1. | - | - |
Weight Distribution |
|||
| Empty - Front Axle | 67.50% | - | - |
| Empty - Rear Axle | 32.50% | - | - |
| Loaded - Front Axle | 44.20% | - | - |
| Loaded - Rear Axle | 55.80% | - | - |
Weights |
|||
| Empty | 63647 lb | - | - |
| Empty - Front Axle | 42944 lb | - | - |
| Empty - Rear Axle | 20704 lb | - | - |
| Loaded | 132277 lb | - | - |
| Loaded - Front Axle | 58451 lb | - | - |
| Loaded - Rear Axle | 73826 lb | - | - |
| Operating Mass* | - | 66469 lb | 45691 lb |
| Operating Mass* - Front Axle | - | 28404 lb | 16810 lb |
| Operating Mass* - Rear Axle | - | 38065 lb | 28881 lb |
| Operating Mass + Rated Payload* | - | 88956 lb | 60682 lb |
| Operating Mass + Rated Payload* - Front Axle | - | 62011 lb | 41105 lb |
| Operating Mass + Rated Payload* - Rear Axle | - | 26944 lb | 19577 lb |
| Note | - | *Calculated weights. | *Calculated weights. |
Body Hoist |
|||
| Raise | 10.5 s | - | - |
| Lower | 11.2 s | - | - |
| Total Cycle Time | 21.7 s | - | - |
Turning Dimensions |
|||
| Outside Clearance Radius | 337.4 in | - | 225.1 in |
| Inner Clearance Radius | 198 in | - | 111.2 in |
| Articulation Angle | 42.5 ° | 42.5° | 42.5° |
| Frame Oscillation | 10 Degrees | - | - |
| Outside Clearance Radius* | - | 261.3 in | - |
| Inner Clearance Radius* | - | 129.6 in | - |
| Axle Oscillation | - | 10° | 10° |
| Note | - | *Clearance dimensions are for reference only. | - |
Transmission |
|||
| Forward - 1 | 3.9 mile/h | 2.8 mile/h | 2.8 mile/h |
| Forward - 2 | 7 mile/h | 5.6 mile/h | 4.8 mile/h |
| Forward - 3 | 12.9 mile/h | 10.4 mile/h | 9.3 mile/h |
| Forward - 4 | 22.8 mile/h | 17.1 mile/h | 16.3 mile/h |
| Reverse - 1 | 4.4 mile/h | 3.1 mile/h | 2.8 mile/h |
| Note | Maximum travel speeds with standard 26.5 × R25 tires. | - | - |
| Reverse - 2 | - | 6.8 mile/h | 4.8 mile/h |
| Reverse - 3 | - | 11.8 mile/h | 9.2 mile/h |
| Reverse - 4 | - | 18.2 mile/h | 14.3 mile/h |
Service Refill Capacities |
|||
| Engine Crankcase - With Filter | 9 gal (US) | 8.98 gal (US) | 6.6 gal (US) |
| Transmission | 18 gal (US) | 12.4 gal (US) | 11.9 gal (US) |
| Hydraulic Tank | 38 gal (US) | 33 gal (US) | 23.2 gal (US) |
| Cooling System | 20 gal (US) | 16.1 gal (US) | 17.7 gal (US) |
| Front Differential and Final Drives | 15 gal (US) | 21.1 gal (US) | 10 gal (US) |
| Rear Differential and Final Drives | 15 gal (US) | 21.1 gal (US) | 11.1 gal (US) |
| Fuel Tank | 108 gal (US) | 105.7 gal (US) | 77.9 gal (US) |
| Secondary Fuel Tank - If Equipped | - | 87.2 gal (US) | - |
Tires |
|||
| Tire Size | 26.5 × R25 | 18 × R25 | 17.5 × R25 |
Final Drives |
|||
| Differential Ratio | 3.38:1 | - | - |
| Final Drive Ratio | 4.76:1 | - | - |
| Total Reduction Ratio | 16.13:1 | - | - |
| Note | Fully floating axles. | - | - |
Standards |
|||
| Standards | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab |
Hydraulic Cycle Times |
|||
| Raise | - | 7.6 s | 5 s |
| Dump | - | 1.6 s | 2 s |
| Lower, Empty, Float Down | - | 2 s | 2.3 s |
| Total Cycle Time | - | 11.2 s | 9.3 s |
Bucket Capacities |
|||
| Bucket Capacities | - | 4.2-5.9 m³ (5.5-7.7 yd³) | - |
| Dump Bucket - 1 | - | 5.5 yd³ | 3.2 yd³ |
| Dump Bucket - 2 - Standard Bucket | - | 6.3 yd³ | - |
| Dump Bucket - 3 | - | 7.3 yd³ | - |
| Dump Bucket - 4 | - | 7.7 yd³ | 4.4 yd³ |
| Ejector Bucket | - | 6.3 yd³ | 3.1 yd³ |
| Bolt Together Bucket | - | 6.9 yd³ | - |
| Dump Bucket - 2 | - | - | 3.7 yd³ |
| Dump Bucket - 3 - Standard Bucket | - | - | 4.1 yd³ |
