Compare Equipment Go Back
AD30 Underground Mining Truck |
R2900G Underground Mining Loader |
R1700 Underground Mining Loader |
AD63 Underground Articulated Truck |
|
Engine |
||||
---|---|---|---|---|
Engine Model | Cat® C15 | Cat® C15 | Cat® C13 | Cat® C27 |
Engine Power - Tier 3 Engine - ISO 14396:2002 | 401 HP | 401 HP | 361 HP | - |
Engine Power - VR Engine - ISO 14396:2002 | 401 HP | 401 HP | 361 HP | - |
Bore | 5.4 in | 5.4 in | - | 5.4 in |
Stroke | 6.8 in | 6.8 in | - | 6 in |
Displacement | 928 in³ | 927.9 in³ | - | 1650 in² |
Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. | Meets EU Stage V emission standards and U.S. EPA Tier 4 Final. |
Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). | No engine derating required up to 591 m (1,938 ft) altitude. | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications |
Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
Optional Ventilation Reduction Package available. | No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. | - |
Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. | Optional Ventilation Reduction package available. | - |
Engine Power - Stage V Engine - ISO 14396:2002 | - | - | 345 HP | - |
Note (6) | - | - | Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. | - |
Note (7) | - | - | Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. | - |
Engine Power - EU Stage V Engine - ISO 14396:2002 | - | - | - | 795 HP |
Operating Specifications |
||||
Nominal Payload Capacity | 66139 lb | 37920 lb | 33069 lb | 138891 lb |
Gross Machine Mass | 132300 lb | 155095 lb | - | - |
Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) | - | - | 26.9-38.3 m³ (35.2-50.1 yd³) |
Static Tipping Load - Straight Ahead - Lift Arms Horizontal | - | 88015 lb | 83218 lb | - |
Static Tipping Load - Full Turn - Lift Arms Horizontal | - | 75109 lb | 69635 lb | - |
Breakout Force - SAE | - | 60298 lb | - | - |
Gross Machine Mass - Loaded | - | - | 138316 lb | - |
Breakout Force - Lift and Tilt | - | - | 53330 lb | - |
Gross Machine Operating Mass | - | - | - | 262218 lb |
Body Capacities |
||||
Body 1 | 14.8 yd³ | - | - | - |
Body 2 - Standard Body | 18.8 yd³ | - | - | - |
Body 3 | 22.9 yd³ | - | - | - |
Wide Body | 21.9 yd³ | - | - | - |
Ejector Body (1) | 19.9 yd³ | - | - | - |
Ejector Body (2) | 21.9 yd³ | - | - | - |
Note | Heaped SAE 2:1. | - | - | Heaped SAE 2:1. |
Dump Body - 1 - Standard | - | - | - | 35.2 yd³ |
Dump Body - 2 | - | - | - | 42.6 yd³ |
Dump Body - 3 | - | - | - | 44.2 yd³ |
Dump Body - 4 | - | - | - | 47.9 yd³ |
Dump Body - 5 (Light Material) | - | - | - | 50.1 yd³ |
Weight Distribution |
||||
Empty - Front Axle | 67.50% | - | - | 70.7% |
Empty - Rear Axle | 32.50% | - | - | 29.3% |
Loaded - Front Axle | 44.20% | - | - | 49.8% |
Loaded - Rear Axle | 55.80% | - | - | 50.2% |
Weights |
||||
Empty | 63647 lb | - | - | 115577 lb |
Empty - Front Axle | 42944 lb | - | - | 81716 lb |
Empty - Rear Axle | 20704 lb | - | - | 33861 lb |
Loaded | 132277 lb | - | - | 254468 lb |
Loaded - Front Axle | 58451 lb | - | - | 126669 lb |
Loaded - Rear Axle | 73826 lb | - | - | 127800 lb |
Operating Mass* | - | 110692 lb | 95189 lb | - |
Operating Mass* - Front Axle | - | 50832 lb | 38358 lb | - |
Operating Mass* - Rear Axle | - | 59860 lb | 56831 lb | - |
Operating Mass + Rated Payload* | - | 148611 lb | 128258 lb | - |
Operating Mass + Rated Payload* - Front Axle | - | 110716 lb | 91412 lb | - |
Operating Mass + Rated Payload* - Rear Axle | - | 37895 lb | 36846 lb | - |
Note | - | *Calculated Weight. | *Calculated weights. | - |
Body Hoist |
||||
Raise | 10.5 s | - | - | 13 s |
Lower | 11.2 s | - | - | 24 s |
Total Cycle Time | 21.7 s | - | - | 37 s |
Turning Dimensions |
||||
Outside Clearance Radius | 337.4 in | 288.3 in | 272 in | 393.9 in |
Inner Clearance Radius | 198 in | 133.2 in | 123.5 in | - |
Articulation Angle | 42.5 ° | 42.5° | 44° | 42.5 ° |
Frame Oscillation | 10 Degrees | - | - | 10° |
Axle Oscillation | - | 8° | 8° | - |
Inside Turn Radius | - | - | - | 218.1 in |
Transmission |
||||
Forward - 1 | 3.9 mile/h | 3.4 mile/h | 3 mile/h | 4.1 mile/h |
Forward - 2 | 7 mile/h | 6 mile/h | 5.7 mile/h | 5.7 mile/h |
Forward - 3 | 12.9 mile/h | 10.7 mile/h | 10.2 mile/h | 7.7 mile/h |
Forward - 4 | 22.8 mile/h | 18.5 mile/h | 17.9 mile/h | 10.3 mile/h |
Reverse - 1 | 4.4 mile/h | 4.1 mile/h | 3.7 mile/h | 5.3 mile/h |
Note | Maximum travel speeds with standard 26.5 × R25 tires. | - | - | Maximum travel speeds with standard 35 × 65 R33 tires. |
Reverse - 2 | - | 7.3 mile/h | 6.5 mile/h | - |
Reverse - 3 | - | 13 mile/h | 11.6 mile/h | - |
Reverse - 4 | - | 22 mile/h | 20.2 mile/h | - |
Forward - 5 | - | - | - | 14 mile/h |
Forward - 6 | - | - | - | 18.9 mile/h |
Forward - 7 | - | - | - | 25.5 mile/h |
Service Refill Capacities |
||||
Engine Crankcase - With Filter | 9 gal (US) | - | - | 25 gal (US) |
Transmission | 18 gal (US) | 16.4 gal (US) | - | 14 gal (US) |
Hydraulic Tank | 38 gal (US) | 37 gal (US) | 35.7 gal (US) | 100.6 gal (US) |
Cooling System | 20 gal (US) | 19.8 gal (US) | 19.8 gal (US) | 39.6 gal (US) |
Front Differential and Final Drives | 15 gal (US) | 31.4 gal (US) | - | 36.5 gal (US) |
Rear Differential and Final Drives | 15 gal (US) | 33.5 gal (US) | - | 36.5 gal (US) |
Fuel Tank | 108 gal (US) | - | - | 237.7 gal (US) |
Engine Crankcase | - | 9 gal (US) | 9.8 gal (US) | - |
Front Differential and Final Drives - With Axle Oil Cooling System | - | 42 gal (US) | - | - |
Rear Differential and Final Drives - With Axle Oil Cooling System | - | 44.1 gal (US) | - | - |
Fuel Tank - Dual | - | 376.4 gal (US) | - | - |
Tires |
||||
Tire Size | 26.5 × R25 | 29.5 × 29 | 26.5R25 | 35 × 65 R33 |
Final Drives |
||||
Differential Ratio | 3.38:1 | - | - | 3.46:1 |
Final Drive Ratio | 4.76:1 | - | - | 5.5:1 |
Total Reduction Ratio | 16.13:1 | - | - | 19.04:1 |
Note | Fully floating axles. | - | - | - |
Standards |
||||
Standards | ROPS/FOPS Certified Cab | - | - | ROPS/FOPS Certified Cab |
Brakes | - | ISO 3450, AS2958.1, CAN-CSA424.30-M90 | - | - |
Cab - FOPS | - | ISO 3449, SAE J231, AS2294.3, EN13627 | - | - |
Cab - ROPS | - | ISO 3471, SAE J1040, AS2294.2, EN13510 | - | - |
Bucket Capacities |
||||
Bucket Capacity | - | 6.3-8.9 m³ (8.2-11.6 yd³) | - | - |
Dump Bucket - 1 | - | 8.2 yd³ | - | - |
Dump Bucket - 2 | - | 9.4 yd³ | 8 yd³ | - |
Dump Bucket - 3 | - | 10.9 yd³ | 8.6 yd³ | - |
Dump Bucket - 4 | - | 11.6 yd³ | 9.4 yd³ | - |
Bucket Capacities | - | - | 5.7-8.6 m³ (7.5-11.2 yd³) | - |
Dump Bucket - 1 - Standard Bucket | - | - | 7.5 yd³ | - |
Dump Bucket - 5 | - | - | 9.8 yd³ | - |
Dump Bucket - 6 | - | - | 10.5 yd³ | - |
Light Material Bucket | - | - | 11.2 yd³ | - |
Ejector Bucket | - | - | 7.6 yd³ | - |
Bolt Together Bucket (1) | - | - | 8.9 yd³ | - |
Bolt Together Bucket (2) | - | - | 9.8 yd³ | - |
Hydraulic Cycle Times |
||||
Raise | - | 9.2 s | 6.8 s | - |
Dump | - | 3.4 s | 3.3 s | - |
Lower, Empty, Float Down | - | 3.1 s | 2.9 s | - |
Total Cycle Time | - | 15.7 s | 13.2 s | - |
Service Capacities - Not Refill |
||||
Fuel System | - | - | 128.4 gal (US) | - |
DEF Tank | - | - | 7.1 gal (US) | - |
Front Differential and Final Drive | - | - | 39 gal (US) | - |
Rear Differential and Final Drive | - | - | 37.2 gal (US) | - |
Transmission | - | - | 14.2 gal (US) | - |