Compare Equipment Go Back
AD30 Underground Mining Truck |
AD63 Underground Articulated Truck |
R1300G Underground Mining Loader |
R3000H Underground Mining Loader |
|
Engine |
||||
---|---|---|---|---|
Engine Model | Cat® C15 | Cat® C27 | Cat® 3306B DITA | Cat® C15 |
Engine Power - Tier 3 Engine - ISO 14396:2002 | 401 HP | - | - | 401 HP |
Engine Power - VR Engine - ISO 14396:2002 | 401 HP | - | - | 401 HP |
Bore | 5.4 in | 5.4 in | 4.75 in | 5.4 in |
Stroke | 6.8 in | 6 in | 6 in | 6.8 in |
Displacement | 928 in³ | 1650 in² | 640.75 in³ | 927.6 in³ |
Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | Meets EU Stage V emission standards and U.S. EPA Tier 4 Final. | Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica |
Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). | All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications | Engine derate will commence at an altitude of 4500 m (14,763.7 ft). | No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. |
Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
- | - | Optional Ventilation Reduction package available. |
Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. | - | - | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
Engine Power - EU Stage V Engine - ISO 14396:2002 | - | 795 HP | - | - |
Engine Power - ISO 14396:2002 | - | - | 157 HP | - |
Operating Specifications |
||||
Nominal Payload Capacity | 66139 lb | 138891 lb | 14991 lb | 44092 lb |
Gross Machine Mass | 132300 lb | - | 65482 lb | 180779 lb |
Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) | 26.9-38.3 m³ (35.2-50.1 yd³) | - | - |
Gross Machine Operating Mass | - | 262218 lb | - | - |
Static Tipping Load - Straight Ahead - Lift Arms Horizontal | - | - | 45360 lb | 104199 lb |
Static Tipping Load - Full Turn - Lift Arms Horizontal | - | - | 39397 lb | - |
Breakout Force - SAE | - | - | 26504 lb | 61773 lb |
Static Tipping Full Turn Ahead Lift Arms Horizontal | - | - | - | 88191 lb |
Body Capacities |
||||
Body 1 | 14.8 yd³ | - | - | - |
Body 2 - Standard Body | 18.8 yd³ | - | - | - |
Body 3 | 22.9 yd³ | - | - | - |
Wide Body | 21.9 yd³ | - | - | - |
Ejector Body (1) | 19.9 yd³ | - | - | - |
Ejector Body (2) | 21.9 yd³ | - | - | - |
Note | Heaped SAE 2:1. | Heaped SAE 2:1. | - | - |
Dump Body - 1 - Standard | - | 35.2 yd³ | - | - |
Dump Body - 2 | - | 42.6 yd³ | - | - |
Dump Body - 3 | - | 44.2 yd³ | - | - |
Dump Body - 4 | - | 47.9 yd³ | - | - |
Dump Body - 5 (Light Material) | - | 50.1 yd³ | - | - |
Weight Distribution |
||||
Empty - Front Axle | 67.50% | 70.7% | - | - |
Empty - Rear Axle | 32.50% | 29.3% | - | - |
Loaded - Front Axle | 44.20% | 49.8% | - | - |
Loaded - Rear Axle | 55.80% | 50.2% | - | - |
Weights |
||||
Empty | 63647 lb | 115577 lb | - | - |
Empty - Front Axle | 42944 lb | 81716 lb | - | - |
Empty - Rear Axle | 20704 lb | 33861 lb | - | - |
Loaded | 132277 lb | 254468 lb | - | - |
Loaded - Front Axle | 58451 lb | 126669 lb | - | - |
Loaded - Rear Axle | 73826 lb | 127800 lb | - | - |
Operating Mass* | - | - | 45691 lb | 128448 lb |
Operating Mass* - Front Axle | - | - | 16810 lb | 54558 lb |
Operating Mass* - Rear Axle | - | - | 28881 lb | 73853 lb |
Operating Mass + Rated Payload* | - | - | 60682 lb | 172540 lb |
Operating Mass + Rated Payload* - Front Axle | - | - | 41105 lb | 125187 lb |
Operating Mass + Rated Payload* - Rear Axle | - | - | 19577 lb | 47316 lb |
Note | - | - | *Calculated weights. | *Calculated weight. |
Body Hoist |
||||
Raise | 10.5 s | 13 s | - | - |
Lower | 11.2 s | 24 s | - | - |
Total Cycle Time | 21.7 s | 37 s | - | - |
Turning Dimensions |
||||
Outside Clearance Radius | 337.4 in | 393.9 in | 225.1 in | - |
Inner Clearance Radius | 198 in | - | 111.2 in | - |
Articulation Angle | 42.5 ° | 42.5 ° | 42.5° | 42.5 ° |
Frame Oscillation | 10 Degrees | 10° | - | - |
Inside Turn Radius | - | 218.1 in | - | - |
Axle Oscillation | - | - | 10° | 8 ° |
Outside Clearance Radius** | - | - | - | 296.7 in |
Inner Clearance Radius** | - | - | - | 127.8 in |
Note | - | - | - | **Clearance dimensions are for reference only. |
Transmission |
||||
Forward - 1 | 3.9 mile/h | 4.1 mile/h | 2.8 mile/h | 3 mile/h |
Forward - 2 | 7 mile/h | 5.7 mile/h | 4.8 mile/h | 5.7 mile/h |
Forward - 3 | 12.9 mile/h | 7.7 mile/h | 9.3 mile/h | 10.2 mile/h |
Forward - 4 | 22.8 mile/h | 10.3 mile/h | 16.3 mile/h | 17.5 mile/h |
Reverse - 1 | 4.4 mile/h | 5.3 mile/h | 2.8 mile/h | 4.1 mile/h |
Note | Maximum travel speeds with standard 26.5 × R25 tires. | Maximum travel speeds with standard 35 × 65 R33 tires. | - | - |
Forward - 5 | - | 14 mile/h | - | - |
Forward - 6 | - | 18.9 mile/h | - | - |
Forward - 7 | - | 25.5 mile/h | - | - |
Reverse - 2 | - | - | 4.8 mile/h | 7.1 mile/h |
Reverse - 3 | - | - | 9.2 mile/h | 12.7 mile/h |
Reverse - 4 | - | - | 14.3 mile/h | 19.4 mile/h |
Service Refill Capacities |
||||
Engine Crankcase - With Filter | 9 gal (US) | 25 gal (US) | 6.6 gal (US) | - |
Transmission | 18 gal (US) | 14 gal (US) | 11.9 gal (US) | 16.4 gal (US) |
Hydraulic Tank | 38 gal (US) | 100.6 gal (US) | 23.2 gal (US) | 37 gal (US) |
Cooling System | 20 gal (US) | 39.6 gal (US) | 17.7 gal (US) | 19.8 gal (US) |
Front Differential and Final Drives | 15 gal (US) | 36.5 gal (US) | 10 gal (US) | 31.4 gal (US) |
Rear Differential and Final Drives | 15 gal (US) | 36.5 gal (US) | 11.1 gal (US) | 33.5 gal (US) |
Fuel Tank | 108 gal (US) | 237.7 gal (US) | 77.9 gal (US) | 406.5 gal (US) |
Engine Crankcase | - | - | - | 9 gal (US) |
Front Differential and Final Drives - With Axle Oil Cooling System | - | - | - | 42 gal (US) |
Rear Differential and Final Drives - With Axle Oil Cooling System | - | - | - | 44.1 gal (US) |
Tires |
||||
Tire Size | 26.5 × R25 | 35 × 65 R33 | 17.5 × R25 | 35/65 R33 |
Final Drives |
||||
Differential Ratio | 3.38:1 | 3.46:1 | - | - |
Final Drive Ratio | 4.76:1 | 5.5:1 | - | - |
Total Reduction Ratio | 16.13:1 | 19.04:1 | - | - |
Note | Fully floating axles. | - | - | - |
Standards |
||||
Standards | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab | ROPS/FOPS Certified Cab | Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab |
Hydraulic Cycle Times |
||||
Raise | - | - | 5 s | 8.8 s |
Dump | - | - | 2 s | 1.85 s |
Lower, Empty, Float Down | - | - | 2.3 s | 3.54 s |
Total Cycle Time | - | - | 9.3 s | 14.2 s |
Bucket Capacities |
||||
Dump Bucket - 1 | - | - | 3.2 yd³ | - |
Dump Bucket - 2 | - | - | 3.7 yd³ | 12.4 yd³ |
Dump Bucket - 3 - Standard Bucket | - | - | 4.1 yd³ | - |
Dump Bucket - 4 | - | - | 4.4 yd³ | - |
Ejector Bucket | - | - | 3.1 yd³ | - |
Bucket Capacities | - | - | - | 8.9-11.6 m³ (11.6-15.2 yd³) |
Dump Bucket - 1 - Standard Bucket | - | - | - | 11.6 yd³ |
Dump Bucket - 3 | - | - | - | 13.7 yd³ |
Light Material Bucket | - | - | - | 15.2 yd³ |