Compare Equipment Go Back

R3000H Underground Mining Loader
R2900G Underground Mining Loader

Engine

Engine Model Cat® C15 Cat® C15 -
Engine Power - Tier 3 Engine - ISO 14396:2002 401 HP 401 HP -
Engine Power - VR Engine - ISO 14396:2002 401 HP 401 HP -
Bore 5.4 in 5.4 in -
Stroke 6.8 in 6.8 in -
Displacement 927.6 in³ 927.9 in³ -
Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. -
Note (2) All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
Note (3) No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. No engine derating required up to 591 m (1,938 ft) altitude. -
Note (4) Optional Ventilation Reduction package available. Optional Ventilation Reduction Package available. -
Note (5) Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. -

Operating Specifications

Nominal Payload Capacity 44092 lb 37920 lb -
Gross Machine Mass 180779 lb 155095 lb -
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 104199 lb 88015 lb -
Static Tipping Full Turn Ahead Lift Arms Horizontal 88191 lb - -
Breakout Force - SAE 61773 lb 60298 lb -
Static Tipping Load - Full Turn - Lift Arms Horizontal - 75109 lb -

Bucket Capacities

Bucket Capacities 8.9-11.6 m³ (11.6-15.2 yd³) - -
Dump Bucket - 1 - Standard Bucket 11.6 yd³ - -
Dump Bucket - 2 12.4 yd³ 9.4 yd³ -
Dump Bucket - 3 13.7 yd³ 10.9 yd³ -
Light Material Bucket 15.2 yd³ - -
Bucket Capacity - 6.3-8.9 m³ (8.2-11.6 yd³) -
Dump Bucket - 1 - 8.2 yd³ -
Dump Bucket - 4 - 11.6 yd³ -

Turning Dimensions

Outside Clearance Radius** 296.7 in - -
Inner Clearance Radius** 127.8 in - -
Axle Oscillation 8 ° -
Articulation Angle 42.5 ° 42.5° -
Note **Clearance dimensions are for reference only. - -
Outside Clearance Radius - 288.3 in -
Inner Clearance Radius - 133.2 in -

Service Refill Capacities

Engine Crankcase 9 gal (US) 9 gal (US) -
Transmission 16.4 gal (US) 16.4 gal (US) -
Hydraulic Tank 37 gal (US) 37 gal (US) -
Cooling System 19.8 gal (US) 19.8 gal (US) -
Front Differential and Final Drives 31.4 gal (US) 31.4 gal (US) -
Front Differential and Final Drives - With Axle Oil Cooling System 42 gal (US) 42 gal (US) -
Rear Differential and Final Drives - With Axle Oil Cooling System 44.1 gal (US) 44.1 gal (US) -
Fuel Tank 406.5 gal (US) - -
Rear Differential and Final Drives 33.5 gal (US) 33.5 gal (US) -
Fuel Tank - Dual - 376.4 gal (US) -

Weights

Operating Mass* 128448 lb 110692 lb -
Operating Mass* - Front Axle 54558 lb 50832 lb -
Operating Mass* - Rear Axle 73853 lb 59860 lb -
Operating Mass + Rated Payload* 172540 lb 148611 lb -
Operating Mass + Rated Payload* - Front Axle 125187 lb 110716 lb -
Operating Mass + Rated Payload* - Rear Axle 47316 lb 37895 lb -
Note *Calculated weight. *Calculated Weight. -

Hydraulic Cycle Times

Raise 8.8 s 9.2 s -
Dump 1.85 s 3.4 s -
Lower, Empty, Float Down 3.54 s 3.1 s -
Total Cycle Time 14.2 s 15.7 s -

Transmission

Forward - 1 3 mile/h 3.4 mile/h -
Forward - 2 5.7 mile/h 6 mile/h -
Forward - 3 10.2 mile/h 10.7 mile/h -
Forward - 4 17.5 mile/h 18.5 mile/h -
Reverse - 1 4.1 mile/h 4.1 mile/h -
Reverse - 2 7.1 mile/h 7.3 mile/h -
Reverse - 3 12.7 mile/h 13 mile/h -
Reverse - 4 19.4 mile/h 22 mile/h -

Tires

Tire Size 35/65 R33 29.5 × 29 -

Standards

Standards Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab - -
Brakes - ISO 3450, AS2958.1, CAN-CSA424.30-M90 -
Cab - FOPS - ISO 3449, SAE J231, AS2294.3, EN13627 -
Cab - ROPS - ISO 3471, SAE J1040, AS2294.2, EN13510 -
Add a Similar Product:
  • R1700 Underground Mining Loader Add
  • R1300G Underground Mining Loader Add
  • R1600H Underground Mining Loader Add