Compare Equipment Go Back

R3000H Underground Mining Loader

Engine

Engine Model Cat® C15 - -
Engine Power - Tier 3 Engine - ISO 14396:2002 401 HP - -
Engine Power - VR Engine - ISO 14396:2002 401 HP - -
Bore 5.4 in - -
Stroke 6.8 in - -
Displacement 927.6 in³ - -
Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. - -
Note (2) All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifica - -
Note (3) No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. - -
Note (4) Optional Ventilation Reduction package available. - -
Note (5) Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. - -

Operating Specifications

Nominal Payload Capacity 44092 lb - -
Gross Machine Mass 180779 lb - -
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 104199 lb - -
Static Tipping Full Turn Ahead Lift Arms Horizontal 88191 lb - -
Breakout Force - SAE 61773 lb - -

Bucket Capacities

Bucket Capacities 8.9-11.6 m³ (11.6-15.2 yd³) - -
Dump Bucket - 1 - Standard Bucket 11.6 yd³ - -
Dump Bucket - 2 12.4 yd³ - -
Dump Bucket - 3 13.7 yd³ - -
Light Material Bucket 15.2 yd³ - -

Turning Dimensions

Outside Clearance Radius** 296.7 in - -
Inner Clearance Radius** 127.8 in - -
Axle Oscillation 8 ° - -
Articulation Angle 42.5 ° - -
Note **Clearance dimensions are for reference only. - -

Service Refill Capacities

Engine Crankcase 9 gal (US) - -
Transmission 16.4 gal (US) - -
Hydraulic Tank 37 gal (US) - -
Cooling System 19.8 gal (US) - -
Front Differential and Final Drives 31.4 gal (US) - -
Front Differential and Final Drives - With Axle Oil Cooling System 42 gal (US) - -
Rear Differential and Final Drives - With Axle Oil Cooling System 44.1 gal (US) - -
Fuel Tank 406.5 gal (US) - -
Rear Differential and Final Drives 33.5 gal (US) - -

Weights

Operating Mass* 128448 lb - -
Operating Mass* - Front Axle 54558 lb - -
Operating Mass* - Rear Axle 73853 lb - -
Operating Mass + Rated Payload* 172540 lb - -
Operating Mass + Rated Payload* - Front Axle 125187 lb - -
Operating Mass + Rated Payload* - Rear Axle 47316 lb - -
Note *Calculated weight. - -

Hydraulic Cycle Times

Raise 8.8 s - -
Dump 1.85 s - -
Lower, Empty, Float Down 3.54 s - -
Total Cycle Time 14.2 s - -

Transmission

Forward - 1 3 mile/h - -
Forward - 2 5.7 mile/h - -
Forward - 3 10.2 mile/h - -
Forward - 4 17.5 mile/h - -
Reverse - 1 4.1 mile/h - -
Reverse - 2 7.1 mile/h - -
Reverse - 3 12.7 mile/h - -
Reverse - 4 19.4 mile/h - -

Tires

Tire Size 35/65 R33 - -

Standards

Standards Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab - -
Add a Similar Product:
  • R2900G Underground Mining Loader Add
  • R1300G Underground Mining Loader Add
  • R1600H Underground Mining Loader Add
  • R1700 Underground Mining Loader Add