|
R2900G Underground Mining Loader
|
R1300G Underground Mining Loader
|
R1600H Underground Mining Loader
|
Engine |
| Engine Model |
Cat® C15 |
Cat® 3306B DITA |
Cat® C11 |
| Engine Power - Tier 3 Engine - ISO 14396:2002 |
401 HP |
- |
271 HP |
| Engine Power - VR Engine - ISO 14396:2002 |
401 HP |
- |
271 HP |
| Bore |
5.4 in |
4.75 in |
5.1 in |
| Stroke |
6.8 in |
6 in |
5.5 in |
| Displacement |
927.9 in³ |
640.75 in³ |
680.4 in³ |
| Note (1) |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat |
| Note (3) |
No engine derating required up to 591 m (1,938 ft) altitude. |
Engine derate will commence at an altitude of 4500 m (14,763.7 ft). |
No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. |
| Note (4) |
Optional Ventilation Reduction Package available. |
- |
Optional Ventilation Reduction package available. |
| Note (5) |
Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
- |
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. |
| Engine Power - ISO 14396:2002 |
- |
157 HP |
- |
Operating Specifications |
| Nominal Payload Capacity |
37920 lb |
14991 lb |
22487 lb |
| Gross Machine Mass |
155095 lb |
65482 lb |
97453 lb |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal |
88015 lb |
45360 lb |
57110 lb |
| Static Tipping Load - Full Turn - Lift Arms Horizontal |
75109 lb |
39397 lb |
46067 lb |
| Breakout Force - SAE |
60298 lb |
26504 lb |
- |
| Breakout Force - Tilt (ISO) |
- |
- |
39524 lb |
| Breakout Force - Lift (ISO) |
- |
- |
42333 lb |
Bucket Capacities |
| Bucket Capacity |
6.3-8.9 m³ (8.2-11.6 yd³) |
- |
- |
| Dump Bucket - 1 |
8.2 yd³ |
3.2 yd³ |
5.5 yd³ |
| Dump Bucket - 2 |
9.4 yd³ |
3.7 yd³ |
- |
| Dump Bucket - 3 |
10.9 yd³ |
- |
7.3 yd³ |
| Dump Bucket - 4 |
11.6 yd³ |
4.4 yd³ |
7.7 yd³ |
| Dump Bucket - 3 - Standard Bucket |
- |
4.1 yd³ |
- |
| Ejector Bucket |
- |
3.1 yd³ |
6.3 yd³ |
| Bucket Capacities |
- |
- |
4.2-5.9 m³ (5.5-7.7 yd³) |
| Dump Bucket - 2 - Standard Bucket |
- |
- |
6.3 yd³ |
| Bolt Together Bucket |
- |
- |
6.9 yd³ |
Service Refill Capacities |
| Engine Crankcase |
9 gal (US) |
- |
- |
| Transmission |
16.4 gal (US) |
11.9 gal (US) |
12.4 gal (US) |
| Hydraulic Tank |
37 gal (US) |
23.2 gal (US) |
33 gal (US) |
| Cooling System |
19.8 gal (US) |
17.7 gal (US) |
16.1 gal (US) |
| Front Differential and Final Drives |
31.4 gal (US) |
10 gal (US) |
21.1 gal (US) |
| Rear Differential and Final Drives |
33.5 gal (US) |
11.1 gal (US) |
21.1 gal (US) |
| Front Differential and Final Drives - With Axle Oil Cooling System |
42 gal (US) |
- |
- |
| Rear Differential and Final Drives - With Axle Oil Cooling System |
44.1 gal (US) |
- |
- |
| Fuel Tank - Dual |
376.4 gal (US) |
- |
- |
| Engine Crankcase - With Filter |
- |
6.6 gal (US) |
8.98 gal (US) |
| Fuel Tank |
- |
77.9 gal (US) |
105.7 gal (US) |
| Secondary Fuel Tank - If Equipped |
- |
- |
87.2 gal (US) |
Standards |
| Brakes |
ISO 3450, AS2958.1, CAN-CSA424.30-M90 |
- |
- |
| Cab - FOPS |
ISO 3449, SAE J231, AS2294.3, EN13627 |
- |
- |
| Cab - ROPS |
ISO 3471, SAE J1040, AS2294.2, EN13510 |
- |
- |
| Standards |
- |
ROPS/FOPS Certified Cab |
ROPS/FOPS Certified Cab |
Weights |
| Operating Mass* |
110692 lb |
45691 lb |
66469 lb |
| Operating Mass* - Front Axle |
50832 lb |
16810 lb |
28404 lb |
| Operating Mass* - Rear Axle |
59860 lb |
28881 lb |
38065 lb |
| Operating Mass + Rated Payload* |
148611 lb |
60682 lb |
88956 lb |
| Operating Mass + Rated Payload* - Front Axle |
110716 lb |
41105 lb |
62011 lb |
| Operating Mass + Rated Payload* - Rear Axle |
37895 lb |
19577 lb |
26944 lb |
| Note |
*Calculated Weight. |
*Calculated weights. |
*Calculated weights. |
Hydraulic Cycle Times |
| Raise |
9.2 s |
5 s |
7.6 s |
| Dump |
3.4 s |
2 s |
1.6 s |
| Lower, Empty, Float Down |
3.1 s |
2.3 s |
2 s |
| Total Cycle Time |
15.7 s |
9.3 s |
11.2 s |
Turning Dimensions |
| Outside Clearance Radius |
288.3 in |
225.1 in |
- |
| Inner Clearance Radius |
133.2 in |
111.2 in |
- |
| Axle Oscillation |
8° |
10° |
10° |
| Articulation Angle |
42.5° |
42.5° |
42.5° |
| Outside Clearance Radius* |
- |
- |
261.3 in |
| Inner Clearance Radius* |
- |
- |
129.6 in |
| Note |
- |
- |
*Clearance dimensions are for reference only. |
Transmission |
| Forward - 1 |
3.4 mile/h |
2.8 mile/h |
2.8 mile/h |
| Forward - 2 |
6 mile/h |
4.8 mile/h |
5.6 mile/h |
| Forward - 3 |
10.7 mile/h |
9.3 mile/h |
10.4 mile/h |
| Forward - 4 |
18.5 mile/h |
16.3 mile/h |
17.1 mile/h |
| Reverse - 1 |
4.1 mile/h |
2.8 mile/h |
3.1 mile/h |
| Reverse - 2 |
7.3 mile/h |
4.8 mile/h |
6.8 mile/h |
| Reverse - 3 |
13 mile/h |
9.2 mile/h |
11.8 mile/h |
| Reverse - 4 |
22 mile/h |
14.3 mile/h |
18.2 mile/h |
Tires |
| Tire Size |
29.5 × 29 |
17.5 × R25 |
18 × R25 |
