CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    R2900G Underground Mining Loader
    View Product
    R1300G Underground Mining Loader
    View Product Remove

    Engine
    Engine Model Cat® C15 Cat® 3306B DITA -
    Engine Power - Tier 3 Engine - ISO 14396:2002 401 HP - -
    Engine Power - VR Engine - ISO 14396:2002 401 HP - -
    Bore 5.4 in 4.75 in -
    Stroke 6.8 in 6 in -
    Displacement 927.9 in³ 640.75 in³ -
    Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. -
    Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
    Note (3) No engine derating required up to 591 m (1,938 ft) altitude. Engine derate will commence at an altitude of 4500 m (14,763.7 ft). -
    Note (4) Optional Ventilation Reduction Package available. - -
    Note (5) Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. - -
    Engine Power - ISO 14396:2002 - 157 HP -

    Operating Specifications
    Nominal Payload Capacity 37920 lb 14991 lb -
    Gross Machine Mass 155095 lb 65482 lb -
    Static Tipping Load - Straight Ahead - Lift Arms Horizontal 88015 lb 45360 lb -
    Static Tipping Load - Full Turn - Lift Arms Horizontal 75109 lb 39397 lb -
    Breakout Force - SAE 60298 lb 26504 lb -

    Bucket Capacities
    Bucket Capacity 6.3-8.9 m³ (8.2-11.6 yd³) - -
    Dump Bucket - 1 8.2 yd³ 3.2 yd³ -
    Dump Bucket - 2 9.4 yd³ 3.7 yd³ -
    Dump Bucket - 3 10.9 yd³ - -
    Dump Bucket - 4 11.6 yd³ 4.4 yd³ -
    Dump Bucket - 3 - Standard Bucket - 4.1 yd³ -
    Ejector Bucket - 3.1 yd³ -

    Service Refill Capacities
    Engine Crankcase 9 gal (US) - -
    Transmission 16.4 gal (US) 11.9 gal (US) -
    Hydraulic Tank 37 gal (US) 23.2 gal (US) -
    Cooling System 19.8 gal (US) 17.7 gal (US) -
    Front Differential and Final Drives 31.4 gal (US) 10 gal (US) -
    Rear Differential and Final Drives 33.5 gal (US) 11.1 gal (US) -
    Front Differential and Final Drives - With Axle Oil Cooling System 42 gal (US) - -
    Rear Differential and Final Drives - With Axle Oil Cooling System 44.1 gal (US) - -
    Fuel Tank - Dual 376.4 gal (US) - -
    Engine Crankcase - With Filter - 6.6 gal (US) -
    Fuel Tank - 77.9 gal (US) -

    Standards
    Brakes ISO 3450, AS2958.1, CAN-CSA424.30-M90 - -
    Cab - FOPS ISO 3449, SAE J231, AS2294.3, EN13627 - -
    Cab - ROPS ISO 3471, SAE J1040, AS2294.2, EN13510 - -
    Standards - ROPS/FOPS Certified Cab -

    Weights
    Operating Mass* 110692 lb 45691 lb -
    Operating Mass* - Front Axle 50832 lb 16810 lb -
    Operating Mass* - Rear Axle 59860 lb 28881 lb -
    Operating Mass + Rated Payload* 148611 lb 60682 lb -
    Operating Mass + Rated Payload* - Front Axle 110716 lb 41105 lb -
    Operating Mass + Rated Payload* - Rear Axle 37895 lb 19577 lb -
    Note *Calculated Weight. *Calculated weights. -

    Hydraulic Cycle Times
    Raise 9.2 s 5 s -
    Dump 3.4 s 2 s -
    Lower, Empty, Float Down 3.1 s 2.3 s -
    Total Cycle Time 15.7 s 9.3 s -

    Turning Dimensions
    Outside Clearance Radius 288.3 in 225.1 in -
    Inner Clearance Radius 133.2 in 111.2 in -
    Axle Oscillation 8° 10° -
    Articulation Angle 42.5° 42.5° -

    Transmission
    Forward - 1 3.4 mile/h 2.8 mile/h -
    Forward - 2 6 mile/h 4.8 mile/h -
    Forward - 3 10.7 mile/h 9.3 mile/h -
    Forward - 4 18.5 mile/h 16.3 mile/h -
    Reverse - 1 4.1 mile/h 2.8 mile/h -
    Reverse - 2 7.3 mile/h 4.8 mile/h -
    Reverse - 3 13 mile/h 9.2 mile/h -
    Reverse - 4 22 mile/h 14.3 mile/h -

    Tires
    Tire Size 29.5 × 29 17.5 × R25 -
    Add a Similar Product:
    • R3000H Underground Mining Loader Add
    • R1700 Underground Mining Loader Add
    • R1600H Underground Mining Loader Add