Compare Equipment Go Back

R2900G Underground Mining Loader
R1700 Underground Mining Loader
R1300G Underground Mining Loader

Engine

Engine Model Cat® C15 Cat® C13 Cat® 3306B DITA
Engine Power - Tier 3 Engine - ISO 14396:2002 401 HP 361 HP -
Engine Power - VR Engine - ISO 14396:2002 401 HP 361 HP -
Bore 5.4 in - 4.75 in
Stroke 6.8 in - 6 in
Displacement 927.9 in³ - 640.75 in³
Note (1) Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard.
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3) No engine derating required up to 591 m (1,938 ft) altitude. All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications Engine derate will commence at an altitude of 4500 m (14,763.7 ft).
Note (4) Optional Ventilation Reduction Package available. No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. -
Note (5) Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. Optional Ventilation Reduction package available. -
Engine Power - Stage V Engine - ISO 14396:2002 - 345 HP -
Note (6) - Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. -
Note (7) - Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. -
Engine Power - ISO 14396:2002 - - 157 HP

Operating Specifications

Nominal Payload Capacity 37920 lb 33069 lb 14991 lb
Gross Machine Mass 155095 lb - 65482 lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 88015 lb 83218 lb 45360 lb
Static Tipping Load - Full Turn - Lift Arms Horizontal 75109 lb 69635 lb 39397 lb
Breakout Force - SAE 60298 lb - 26504 lb
Gross Machine Mass - Loaded - 138316 lb -
Breakout Force - Lift and Tilt - 53330 lb -

Bucket Capacities

Bucket Capacity 6.3-8.9 m³ (8.2-11.6 yd³) - -
Dump Bucket - 1 8.2 yd³ - 3.2 yd³
Dump Bucket - 2 9.4 yd³ 8 yd³ 3.7 yd³
Dump Bucket - 3 10.9 yd³ 8.6 yd³ -
Dump Bucket - 4 11.6 yd³ 9.4 yd³ 4.4 yd³
Bucket Capacities - 5.7-8.6 m³ (7.5-11.2 yd³) -
Dump Bucket - 1 - Standard Bucket - 7.5 yd³ -
Dump Bucket - 5 - 9.8 yd³ -
Dump Bucket - 6 - 10.5 yd³ -
Light Material Bucket - 11.2 yd³ -
Ejector Bucket - 7.6 yd³ 3.1 yd³
Bolt Together Bucket (1) - 8.9 yd³ -
Bolt Together Bucket (2) - 9.8 yd³ -
Dump Bucket - 3 - Standard Bucket - - 4.1 yd³

Service Refill Capacities

Engine Crankcase 9 gal (US) 9.8 gal (US) -
Transmission 16.4 gal (US) - 11.9 gal (US)
Hydraulic Tank 37 gal (US) 35.7 gal (US) 23.2 gal (US)
Cooling System 19.8 gal (US) 19.8 gal (US) 17.7 gal (US)
Front Differential and Final Drives 31.4 gal (US) - 10 gal (US)
Rear Differential and Final Drives 33.5 gal (US) - 11.1 gal (US)
Front Differential and Final Drives - With Axle Oil Cooling System 42 gal (US) - -
Rear Differential and Final Drives - With Axle Oil Cooling System 44.1 gal (US) - -
Fuel Tank - Dual 376.4 gal (US) - -
Engine Crankcase - With Filter - - 6.6 gal (US)
Fuel Tank - - 77.9 gal (US)

Standards

Brakes ISO 3450, AS2958.1, CAN-CSA424.30-M90 - -
Cab - FOPS ISO 3449, SAE J231, AS2294.3, EN13627 - -
Cab - ROPS ISO 3471, SAE J1040, AS2294.2, EN13510 - -
Standards - - ROPS/FOPS Certified Cab

Weights

Operating Mass* 110692 lb 95189 lb 45691 lb
Operating Mass* - Front Axle 50832 lb 38358 lb 16810 lb
Operating Mass* - Rear Axle 59860 lb 56831 lb 28881 lb
Operating Mass + Rated Payload* 148611 lb 128258 lb 60682 lb
Operating Mass + Rated Payload* - Front Axle 110716 lb 91412 lb 41105 lb
Operating Mass + Rated Payload* - Rear Axle 37895 lb 36846 lb 19577 lb
Note *Calculated Weight. *Calculated weights. *Calculated weights.

Hydraulic Cycle Times

Raise 9.2 s 6.8 s 5 s
Dump 3.4 s 3.3 s 2 s
Lower, Empty, Float Down 3.1 s 2.9 s 2.3 s
Total Cycle Time 15.7 s 13.2 s 9.3 s

Turning Dimensions

Outside Clearance Radius 288.3 in 272 in 225.1 in
Inner Clearance Radius 133.2 in 123.5 in 111.2 in
Axle Oscillation 10°
Articulation Angle 42.5° 44° 42.5°

Transmission

Forward - 1 3.4 mile/h 3 mile/h 2.8 mile/h
Forward - 2 6 mile/h 5.7 mile/h 4.8 mile/h
Forward - 3 10.7 mile/h 10.2 mile/h 9.3 mile/h
Forward - 4 18.5 mile/h 17.9 mile/h 16.3 mile/h
Reverse - 1 4.1 mile/h 3.7 mile/h 2.8 mile/h
Reverse - 2 7.3 mile/h 6.5 mile/h 4.8 mile/h
Reverse - 3 13 mile/h 11.6 mile/h 9.2 mile/h
Reverse - 4 22 mile/h 20.2 mile/h 14.3 mile/h

Tires

Tire Size 29.5 × 29 26.5R25 17.5 × R25

Service Capacities - Not Refill

Fuel System - 128.4 gal (US) -
DEF Tank - 7.1 gal (US) -
Front Differential and Final Drive - 39 gal (US) -
Rear Differential and Final Drive - 37.2 gal (US) -
Transmission - 14.2 gal (US) -
Add a Similar Product:
  • R3000H Underground Mining Loader Add
  • R1600H Underground Mining Loader Add