Compare Equipment Go Back

R1300G Underground Mining Loader
R1600H Underground Mining Loader

Engine

Engine Model Cat® 3306B DITA Cat® C11 -
Engine Power - ISO 14396:2002 157 HP - -
Bore 4.75 in 5.1 in -
Stroke 6 in 5.5 in -
Displacement 640.75 in³ 680.4 in³ -
Note (1) Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. -
Note (2) All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat -
Note (3) Engine derate will commence at an altitude of 4500 m (14,763.7 ft). No engine derating required up to 3048 m (10,000 ft) for Tier 3 Engine and 1828 m (6,000 ft) for VR Engine. -
Engine Power - Tier 3 Engine - ISO 14396:2002 - 271 HP -
Engine Power - VR Engine - ISO 14396:2002 - 271 HP -
Note (4) - Optional Ventilation Reduction package available. -
Note (5) - Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA is also available. -

Operating Specifications

Nominal Payload Capacity 14991 lb 22487 lb -
Gross Machine Mass 65482 lb 97453 lb -
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 45360 lb 57110 lb -
Static Tipping Load - Full Turn - Lift Arms Horizontal 39397 lb 46067 lb -
Breakout Force - SAE 26504 lb - -
Breakout Force - Tilt (ISO) - 39524 lb -
Breakout Force - Lift (ISO) - 42333 lb -

Weights

Operating Mass* 45691 lb 66469 lb -
Operating Mass* - Front Axle 16810 lb 28404 lb -
Operating Mass* - Rear Axle 28881 lb 38065 lb -
Operating Mass + Rated Payload* 60682 lb 88956 lb -
Operating Mass + Rated Payload* - Front Axle 41105 lb 62011 lb -
Operating Mass + Rated Payload* - Rear Axle 19577 lb 26944 lb -
Note *Calculated weights. *Calculated weights. -

Transmission

Forward - 1 2.8 mile/h 2.8 mile/h -
Forward - 2 4.8 mile/h 5.6 mile/h -
Forward - 3 9.3 mile/h 10.4 mile/h -
Forward - 4 16.3 mile/h 17.1 mile/h -
Reverse - 1 2.8 mile/h 3.1 mile/h -
Reverse - 2 4.8 mile/h 6.8 mile/h -
Reverse - 3 9.2 mile/h 11.8 mile/h -
Reverse - 4 14.3 mile/h 18.2 mile/h -

Hydraulic Cycle Times

Raise 5 s 7.6 s -
Dump 2 s 1.6 s -
Lower, Empty, Float Down 2.3 s 2 s -
Total Cycle Time 9.3 s 11.2 s -

Bucket Capacities

Dump Bucket - 1 3.2 yd³ 5.5 yd³ -
Dump Bucket - 2 3.7 yd³ - -
Dump Bucket - 3 - Standard Bucket 4.1 yd³ - -
Dump Bucket - 4 4.4 yd³ 7.7 yd³ -
Ejector Bucket 3.1 yd³ 6.3 yd³ -
Bucket Capacities - 4.2-5.9 m³ (5.5-7.7 yd³) -
Dump Bucket - 2 - Standard Bucket - 6.3 yd³ -
Dump Bucket - 3 - 7.3 yd³ -
Bolt Together Bucket - 6.9 yd³ -

Turning Dimensions

Outside Clearance Radius 225.1 in - -
Inner Clearance Radius 111.2 in - -
Axle Oscillation 10° 10° -
Articulation Angle 42.5° 42.5° -
Outside Clearance Radius* - 261.3 in -
Inner Clearance Radius* - 129.6 in -
Note - *Clearance dimensions are for reference only. -

Tires

Tire Size 17.5 × R25 18 × R25 -

Service Refill Capacities

Engine Crankcase - With Filter 6.6 gal (US) 8.98 gal (US) -
Transmission 11.9 gal (US) 12.4 gal (US) -
Hydraulic Tank 23.2 gal (US) 33 gal (US) -
Cooling System 17.7 gal (US) 16.1 gal (US) -
Front Differential and Final Drives 10 gal (US) 21.1 gal (US) -
Rear Differential and Final Drives 11.1 gal (US) 21.1 gal (US) -
Fuel Tank 77.9 gal (US) 105.7 gal (US) -
Secondary Fuel Tank - If Equipped - 87.2 gal (US) -

Standards

Standards ROPS/FOPS Certified Cab ROPS/FOPS Certified Cab -
Add a Similar Product:
  • R3000H Underground Mining Loader Add
  • R2900G Underground Mining Loader Add
  • R1700 Underground Mining Loader Add