Compare Equipment Go Back
 R1300G Underground Mining Loader |
|
|
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® 3306B DITA | - | - |
| Engine Power - ISO 14396:2002 | 157 HP | - | - |
| Bore | 4.75 in | - | - |
| Stroke | 6 in | - | - |
| Displacement | 640.75 in³ | - | - |
| Note (1) | Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. | - | - |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat | - | - |
| Note (3) | Engine derate will commence at an altitude of 4500 m (14,763.7 ft). | - | - |
Operating Specifications |
|||
| Nominal Payload Capacity | 14991 lb | - | - |
| Gross Machine Mass | 65482 lb | - | - |
| Static Tipping Load - Straight Ahead - Lift Arms Horizontal | 45360 lb | - | - |
| Static Tipping Load - Full Turn - Lift Arms Horizontal | 39397 lb | - | - |
| Breakout Force - SAE | 26504 lb | - | - |
Weights |
|||
| Operating Mass* | 45691 lb | - | - |
| Operating Mass* - Front Axle | 16810 lb | - | - |
| Operating Mass* - Rear Axle | 28881 lb | - | - |
| Operating Mass + Rated Payload* | 60682 lb | - | - |
| Operating Mass + Rated Payload* - Front Axle | 41105 lb | - | - |
| Operating Mass + Rated Payload* - Rear Axle | 19577 lb | - | - |
| Note | *Calculated weights. | - | - |
Transmission |
|||
| Forward - 1 | 2.8 mile/h | - | - |
| Forward - 2 | 4.8 mile/h | - | - |
| Forward - 3 | 9.3 mile/h | - | - |
| Forward - 4 | 16.3 mile/h | - | - |
| Reverse - 1 | 2.8 mile/h | - | - |
| Reverse - 2 | 4.8 mile/h | - | - |
| Reverse - 3 | 9.2 mile/h | - | - |
| Reverse - 4 | 14.3 mile/h | - | - |
Hydraulic Cycle Times |
|||
| Raise | 5 s | - | - |
| Dump | 2 s | - | - |
| Lower, Empty, Float Down | 2.3 s | - | - |
| Total Cycle Time | 9.3 s | - | - |
Bucket Capacities |
|||
| Dump Bucket - 1 | 3.2 yd³ | - | - |
| Dump Bucket - 2 | 3.7 yd³ | - | - |
| Dump Bucket - 3 - Standard Bucket | 4.1 yd³ | - | - |
| Dump Bucket - 4 | 4.4 yd³ | - | - |
| Ejector Bucket | 3.1 yd³ | - | - |
Turning Dimensions |
|||
| Outside Clearance Radius | 225.1 in | - | - |
| Inner Clearance Radius | 111.2 in | - | - |
| Axle Oscillation | 10° | - | - |
| Articulation Angle | 42.5° | - | - |
Tires |
|||
| Tire Size | 17.5 × R25 | - | - |
Service Refill Capacities |
|||
| Engine Crankcase - With Filter | 6.6 gal (US) | - | - |
| Transmission | 11.9 gal (US) | - | - |
| Hydraulic Tank | 23.2 gal (US) | - | - |
| Cooling System | 17.7 gal (US) | - | - |
| Front Differential and Final Drives | 10 gal (US) | - | - |
| Rear Differential and Final Drives | 11.1 gal (US) | - | - |
| Fuel Tank | 77.9 gal (US) | - | - |
Standards |
|||
| Standards | ROPS/FOPS Certified Cab | - | - |
