Compare

Compare Equipment Go Back

Engine - U.S. EPA Tier 4 Final/EU Stage V
	D10 Dozer View Product	834 Wheel Dozer View Product Remove	D9 Dozer View Product Remove
Engine Model	Cat® C27	-	Cat® C18
Engine Power - Net SAE J1349/ISO 9249** - Forward	602 HP	-	-
Engine Power - Gross SAE J1995* - Forward	631 HP	-	-
Engine Power - Gross SAE J1995* - Reverse	766 HP	-	-
Engine Power - ISO 14396* - Forward	620 HP	-	-
Engine Power - ISO 14396* - Reverse	754 HP	-	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	722 HP	-	-
Displacement	1648 in³	-	1106 in³
Stroke	6 in	-	7.2 in³
Bore	5.4 in	-	5.7 in³
Emissions	U.S. EPA Tier 4 Final/EU Stage V	-	U.S. EPA Tier 4 / EU Stage V
Note (1)	*Excludes all fan losses.	-	All Engine ratings apply at 1,750 rpm.
Note (2)	All Engine ratings apply at 1,800 rpm.	-	No derating required up to 2499 m (8,200 ft).
Note (3)	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	-	-
Note (4)	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-	-
Note (5)	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-	-
Engine Power - Gross SAE J1995	-	-	477 HP
Engine Power - ISO 14396	-	-	468 HP
Engine Power - Net SAE J1349/ISO 9249	-	-	440 HP
Weights
Operating Weight	154888 lb	-	110225 lb
Shipping Weight	111739 lb	-	84373 lb
Note (1)	D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	-	D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Note (2)	D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.	-	D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
Undercarriage
Shoe Type	Extreme Service (ES)	-	Extreme Service
Width - Shoe	24 in	-	24 in
Shoes/Side	44	-	43
Grouser Height	3.7 in	-	3.3 in
Pitch	10.2 in	-	9.4 in
Ground Clearance	28.5 in	-	18.1 in
Track Gauge	100.4 in	-	88.6 in
Length - Track on Ground	152.8 in	-	136.6 in
Ground Contact Area	7347 in²	-	45.6 ft²
Track Rollers/Side	8	-	8
Number of Carrier Rollers	1 per side (optional)	-	1 per side (optional)
Standards
ROPS	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.	-	Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS	Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.	-	Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Sound	Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)	-	The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
Note	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and	-	-
Sound (1)	Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)	-	The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
Note (1)	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.	-	-
Note (2)	The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.	-	-
Note (3)	The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).	-	-
Sound (2)	-	-	Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
Steering and Brakes
Steering Type	Hydraulically Applied Multiple-Disc Steering Clutch	-	Differential
Brake Type	Spring Applied Multiple- Disc Brake	-	Spring Applied Wet Disc
Brake Diameter	15.4 in	-	15.5 in
Brake Count	10	-	8
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
Transmission
1.0 Forward	2.5 mile/h	-	2.2 mile/h
1.5 Forward	3.4 mile/h	-	-
2.0 Forward	4.5 mile/h	-	3.9 mile/h
2.5 Forward	6 mile/h	-	-
3.0 Forward	7.8 mile/h	-	6.8 mile/h
1.0 Reverse	3.2 mile/h	-	2.7 mile/h
1.5 Reverse	4.2 mile/h	-	-
2.0 Reverse	5.6 mile/h	-	4.8 mile/h
2.5 Reverse	7.5 mile/h	-	-
3.0 Reverse	9.8 mile/h	-	8.4 mile/h
Transmission Clutch Diameter	17 in	-	-
Type	Planetary powershift	-	Planetary powershift
Transmission Type	-	Cat planetary power shift	-
Forward - 1	-	4.2 mile/h	-
Forward - 2	-	7.2 mile/h	-
Forward - 3	-	12.6 mile/h	-
Forward - 4	-	22 mile/h	-
Reverse - 1	-	4.2 mile/h	-
Reverse - 2	-	7.6 mile/h	-
Reverse - 3	-	13.3 mile/h	-
Direct Drive - Forward 1	-	Lock-up disabled	-
Direct Drive - Forward 2	-	7.7 mile/h	-
Direct Drive - Forward 3	-	13.7 mile/h	-
Direct Drive - Forward 4	-	23.9 mile/h	-
Direct Drive - Reverse 1	-	4.5 mile/h	-
Direct Drive - Reverse 2	-	8.1 mile/h	-
Direct Drive - Reverse 3	-	14.3 mile/h	-
Blades
10SU ABR - Capacity (SAE J1265)	24.2 yd³	-	-
10SU ABR - Width (over end bits)	194.5 in	-	-
10SU ABR - Height	83.5 in	-	-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	19.98 in	-	-
10SU ABR - Digging Depth - Blade Pitch: Nominal	25.23 in	-	-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	30.08 in³	-	-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	66.14 in	-	-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	53.86 in	-	-
10SU ABR - Ground Clearance - Maximum Tilt LH	56.3 in	-	-
10SU ABR - Ground Clearance - Maximum Tilt RH	56.3 in	-	-
10U ABR - Capacity (SAE J1265)	28.7 yd³	-	-
10U ABR - Width (over end bits)	207.1 in	-	-
10U ABR - Height	83.5 in	-	-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	19.98 in	-	-
10U ABR - Digging Depth - Blade Pitch: Nominal	60 in	-	-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	30.1 in	-	-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	66.1 in	-	-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	53.9 in	-	-
10U ABR - Ground Clearance - Maximum Tilt LH	60.8 in	-	-
10U ABR - Ground Clearance - Maximum Tilt RH	60.8 in	-	-
10U ABR - Weights - Blade Weight*	23585 lb	-	-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)	154888 lb	-	-
Note (1)	Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees	-	-
Note (2)	*Does not include hydraulic controls but includes blade cylinders, pusharms.	-	-
Note (3)	**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	-	-
Ripper - Single Shank
Maximum penetration force * (shank vertical)	49233 lbf	-	35520 lbf
Maximum penetration depth (standard tip)	59.2 in	-	48.5 in
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	36 in	-	34.7 in
Weight	14209 lb	-	10701 lb
Note	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Pryout Force	-	-	74637 lbf
Number of Pockets	-	-	1
Total Operating Weight* (with SU Blade and noted ripper)	-	-	110205 lb
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	53055 lbf	-	38667 lbf
Maximum penetration depth (standard tip)	78.3 in	-	68 in
Weight	14548 lb	-	10981 lb
Note	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Pryout Force	-	-	74412 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	32.2 in
Number of Pockets	-	-	1
Total Operating Weight* (with SU Blade and noted ripper)	-	-	110485 lb
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	Cat® C27	-	-
Engine Power - Net SAE J1349/ISO 9249** - Forward	603 HP	-	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	722 HP	-	-
Engine Power - Gross SAE J1995* - Forward	631 HP	-	-
Engine Power - Gross SAE J1995* - Reverse	766 HP	-	-
Engine Power - ISO 14396* - Forward	622 HP	-	-
Engine Power - ISO 14396* - Reverse	756 HP	-	-
Displacement	1648 in³	-	-
Bore	5.4 in	-	-
Stroke	6 in	-	-
Emissions	U.S. EPA Tier 2 Equivalent	-	-
Note (1)	*Excludes all fan losses.	-	-
Note (2)	All Engine ratings apply at 1,800 rpm.	-	-
Note (3)	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	-	-
Note (4)	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-	-
Note (5)	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-	-
Fuel Tank Capacities
Fuel Tank - Usable Volume	323.3 gal (US)	-	-
Fuel Tank - Total Volume	335.2 gal (US)	-	-
Hydraulic Controls
Pump Type	Variable displacement piston	-	Piston-type geared to flywheel
Pump Output - Implement	112 gal/min	-	-
Note (1)	Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).	-	Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Fan Pump	21.7 gal/min	-	21 gal/min
Note (2)	Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).	-	Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Tilt Cylinder Flow - Rod End Flow	112 gal/min	-	53 gal/min
Tilt Cylinder Flow - Head End Flow	63.4 gal/min	-	53 gal/min
Lift Cylinder Relief Valve Setting	4061.1 psi	-	3800 lbf/in
Tilt Cylinder Relief Valve Setting	3872.5 psi	-	2799 psi
Ripper - Lift - Relief Valve Setting	4061.1 psi	-	3800 psi
Ripper - Pitch - Relief Valve Setting	4061.1 psi	-	3800 psi
Tank Capacity	32.2 gal (US)	-	24 gal/min
Cylinder Sizing - Blade Lift - Bore	5.5 in	-	-
Cylinder Sizing - Blade Tilt - Bore	8.3 in	-	-
Cylinder Sizing - Ripper Shank Lift - Bore	8.3 in	-	-
Cylinder Sizing - Ripper Shank Angle - Bore	7.1 in	-	-
Cylinder Sizing - Blade Lift - Stroke	65.1 in	-	-
Cylinder Sizing - Blade Tilt - Stroke	9.5 in	-	-
Cylinder Sizing - Ripper Shank Lift - Stroke	21.1 in	-	-
Cylinder Sizing - Ripper Shank Angle - Stroke	26 in	-	-
Note (3)	Electro-hydraulic pilot valves assist operations of ripper and dozer controls.	-	Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Pump Output - Steering	-	-	96 gal/min
Steering System - Pressure	-	-	5874 psi
Dimensions (Approximate)
Ground Clearance*	28.5 in	-	18.1 in
Track Gauge	100.4 in	-	88.6 in
Width - Without Trunnions - 610 mm/24 in ES	130.4 in	-	-
Width - Over Trunnions	148 in	-	130.3 in
Height - FOPS Cab*	162.8 in	-	150.4 in
Height - Top of Stack*	171.5 in	-	152.6 in
Height - ROPS/Canopy*	173.5 in	-	157.5 in
Note (1)	*Includes grouser height for total dimensions on hard surfaces.	-	*Includes grouser height for total dimensions on hard surfaces.
Length - Track on Ground	152.8 in	-	136.6 in
Overall Length - Basic Tractor	209.6 in	-	193.3 in
Length - With SU-Blade	292 in	-	-
Length - With U-Blade	305.1 in	-	274.3 in
Length - With Single-Shank Ripper	278.8 in	-	257 in
Length - With Multi-Shank Ripper	285.1 in	-	257.4 in
Overall Length - SU-Blade/SS Ripper	360.6 in	-	323.6 in
Width - Without Trunnions - Standard Shoe	-	-	113 in
Drawbar Height (Center of Clevis)*	-	-	30 in
Length - Basic Tractor - With Drawbar	-	-	206.4 in
Length - Basic Tractor - With Winch	-	-	218.3 in
Length - With SU-Blade**	-	-	259.9 in
FLUID CAPACITIES
Cooling System Refill – Tier 4 Final Engine	46.2 gal (US)	-	-
Engine Crankcase Sump	27.2 gal (US)	-	-
Power Train - Total Volume	81.4 gal (US)	-	-
Power Train - Refill Volume	74.8 gal (US)	-	-
Final Drives (each)	12.2 gal (US)	-	4 gal (US)
Track Roller Frames (each)	16.9 gal (US)	-	-
Pivot Shaft Oil	9.5 gal (US)	-	8 gal (US)
Hydraulic System Tank	32.2 gal (US)	-	24 gal (US)
Fuel Tank (Splash Fill)	-	-	254 gal (US)
DEF Tank (Tier 4 only)	-	-	9.5 gal (US)
Fuel Tank (Fast Fill)	-	-	248 gal (US)
Cooling System	-	-	21 gal (US)
Engine Crankcase*	-	-	10 gal (US)
Powertrain	-	-	40 gal (US)
Roller Frames (each)	-	-	12 gal (US)
Note	-	-	*With oil filters.
Note 2	-	-	Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
Note 3	-	-	All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
Note 4	-	-	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Engine
Engine Model	-	Cat® C18	-
Rated Speed	-	1900 r/min	-
Peak Power Speed	-	1500 r/min	-
Gross Power - SAE J1995	-	562 HP	-
Net Power - SAE J1349	-	496 HP	-
Bore	-	5.7 in	-
Stroke	-	7.2 in	-
Displacement	-	1105 in³	-
Peak Torque - 1,300 rpm	-	2092 lb/ft	-
Torque Rise	-	52 %	-
Emissions	-	U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2.	-
Operating Specifications
Operating Weight	-	105271 lb	-
Blade Capacities	-	7.9 – 22.2 m3 (10.3 – 29.0 yd3)	-
Coal Scoop Operating Weight	-	112428 lb	-
Chip Scoop Operating Weight	-	112838 lb	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	-	Pilot operated LS valve with EH	-
Lift/Tilt System	-	Variable displacement piston	-
Maximum Flow at 1,900 rpm	-	153 gal/min	-
Relief Valve Setting - Lift/Tilt	-	4641 psi	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	139.75 mm × 1021 mm (5.5 in × 40.2 in)	-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke	-	140 mm × 230 mm (5.5 in × 9.1 in)	-
Pilot System	-	Variable displacement piston	-
Pilot Maximum Flow	-	13.7 gal/min	-
Pilot Relief Valve Setting	-	580 psi	-
Hydraulic System - Steering
Steering System - Circuit	-	Pilot, load sensing	-
Steering System - Pump	-	Piston, variable displacement	-
Maximum Flow	-	65.8 gal/min	-
Relief Valve Setting - Steering	-	3495 psi	-
Total Steering Angle	-	86 °	-
Steering Cycle Times - High Idle	-	3.1 s	-
Steering Cycle Times - Low Idle	-	5.7 s	-
Service Refill Capacities
Fuel Tank	-	209.5 gal (US)	-
Cooling System	-	31.7 gal (US)	-
Crankcase	-	15.9 gal (US)	-
Diesel Exhaust Fluid Tank	-	8.7 gal (US)	-
Transmission	-	31.7 gal (US)	-
Hydraulic System Factory Fill	-	63.4 gal (US)	-
Differential - Final Drives - Front	-	49.1 gal (US)	-
Differential - Final Drives - Rear	-	49.1 gal (US)	-
Hydraulic System - Tank Only	-	37 gal (US)	-
Axles
Front	-	Fixed	-
Rear	-	Trunnion	-
Oscillation Angle	-	±13°	-
Brakes
Brakes	-	ISO 3450: 2011	-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)	-	72 dB(A)	-
Machine Sound Level (ISO 6395)	-	113 dB(A)	-
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)	-	72 dB(A)	-
Machine Sound Level (ISO 6395)	-	109 dB(A)	-
Dimensions
Height - Top of Exhaust Stack	-	15.9 ft	-
Height - Top of Air Cleaner	-	12.8 ft	-
Height - Top of Hood	-	10.9 ft	-
Ground Clearance - Bumper	-	3.1 ft	-
Centerline of Rear Axle to Edge of Bumper	-	10.5 ft	-
Wheel Base	-	14.9 ft	-
Length - Front of Tire	-	28.4 ft	-
Length - Straight Blade on Ground	-	32.6 ft	-
Centerline of Front Axle to Hitch	-	7.5 ft	-
Length - Universal Blade on Ground	-	34.4 ft	-
Ground Clearance	-	1.7 ft	-
Height - Top of Cab	-	13.7 ft	-
Scoops
Chip Scoop Carry Capacity	-	35 yd³	-
Chip Scoop Doze Capacity	-	70 yd³	-
Coal Scoop Carry Capacity	-	30 yd³	-
Coal Scoop Doze Capacity	-	60 yd³	-
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model	-	-	Cat® C18
Engine Power - Net SAE J1349/ISO 9249	-	-	452 HP
Bore	-	-	5.7 in³
Stroke	-	-	7.2 in
Displacement	-	-	1106 in³
Engine Power - Gross SAE J1995	-	-	487 HP
Engine Power - ISO 14396	-	-	479 HP
Emissions	-	-	U.S. EPA Tier 2 or Tier 3 equivalent
Note (1)	-	-	All engine ratings apply at 1,750 rpm.
Note (2)	-	-	No derating required up to 4267 m (14,000 ft) altitude.
Blade - Semi-Universal
Blade Capacity (SAE J1265)	-	-	17.8 yd³
Blade Width (over end bits)	-	-	171.3 in
Blade Height	-	-	76.1 in
Maximum Digging Depth	-	-	23.9 in
Ground Clearance at Full Lift	-	-	56 in
Maximum Tilt	-	-	37 in
Blade Weight	-	-	10587 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	110205 lb
Note	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Blade - Universal
Blade Capacity (SAE J1265)	-	-	21.7 yd³
Blade Width (over end bits)	-	-	184.3 in
Blade Height	-	-	76.1 in
Maximum Digging Depth	-	-	23.9 in
Ground Clearance at Full Lift	-	-	56 in
Maximum Tilt	-	-	39.9 in
Blade Weight	-	-	12016 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	111362 lb
Note	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical	-	-	34621 lbf
Maximum Penetration - Standard Tip	-	-	31.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth	-	-	81156 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	34.6 in
Number of Pockets	-	-	3
Weight	-	-	12136 lb
Total Operating Weight* - With SU-Blade and Ripper	-	-	111739 lb
Note	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Winches
Winch Model	-	-	PA 140VS
Weight*	-	-	3950 lb
Oil Capacity	-	-	4 gal (US)
Drum Width	-	-	12.6 in
Wire Cable Diameter - Recommended	-	-	1.13 in
Wire Cable Diameter - Optional	-	-	1.25 ft
Maximum Drum Capacity - Recommended Cable Length	-	-	257 in
Maximum Drum Capacity - Optional Cable Length	-	-	204 ft
Wire Cable Ferrule Size - Outside Diameter	-	-	2.4 in
Wire Cable Ferrule Size - Length	-	-	2.8 in
Note	-	-	*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2)	-	-	Variable speed, hydraulically driven, dual braking system, three-roller fairlead.

Compare Equipment Go Back

D10 Dozer

834 Wheel Dozer

D9 Dozer

Engine - U.S. EPA Tier 4 Final/EU Stage V

Weights

Undercarriage

Standards

Steering and Brakes

Air Conditioning System

Transmission

Blades

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Hydraulic Controls

Dimensions (Approximate)

FLUID CAPACITIES

Engine

Operating Specifications

Hydraulic System - Lift/Tilt

Hydraulic System - Steering

Service Refill Capacities

Axles

Brakes

Sound Performance - Tier 4 Final/EU Stage V - Standard

Sound Performance - Tier 4 Final/EU Stage V - Suppression

Dimensions

Scoops

Engine - U.S. EPA Tier 2/3 Equivalent

Blade - Semi-Universal

Blade - Universal

Ripper - Multi-Shank, Adjustable Parallelogram

Winches

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us