Compare

Compare Equipment Go Back

Engine - U.S. EPA Tier 4 Final/EU Stage V
	D10 Dozer View Product	854 Wheel Dozer View Product Remove	D3 Track-Type Tractor View Product Remove
Engine Model	Cat® C27	-	-
Engine Power - Net SAE J1349/ISO 9249** - Forward	602 HP	-	-
Engine Power - Gross SAE J1995* - Forward	631 HP	-	-
Engine Power - Gross SAE J1995* - Reverse	766 HP	-	-
Engine Power - ISO 14396* - Forward	620 HP	-	-
Engine Power - ISO 14396* - Reverse	754 HP	-	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	722 HP	-	-
Displacement	1648 in³	-	-
Stroke	6 in	-	-
Bore	5.4 in	-	-
Emissions	U.S. EPA Tier 4 Final/EU Stage V	-	-
Note (1)	*Excludes all fan losses.	-	-
Note (2)	All Engine ratings apply at 1,800 rpm.	-	-
Note (3)	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	-	-
Note (4)	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-	-
Note (5)	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-	-
Weights
Operating Weight	154888 lb	224647 lb	20640 lb
Shipping Weight	111739 lb	-	-
Note (1)	D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	-	Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note (2)	D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.	-	For machine with ripper, add 554 kg (1,222 lb).
Operating Weight - LGP	-	-	21369 lb
Operating Weight - LGP, 762 mm/30 in	-	-	21810 lb
Undercarriage
Shoe Type	Extreme Service (ES)	-	-
Width - Shoe	24 in	-	-
Shoes/Side	44	-	-
Grouser Height	3.7 in	-	-
Pitch	10.2 in	-	-
Ground Clearance	28.5 in	-	-
Track Gauge	100.4 in	-	63 in
Length - Track on Ground	152.8 in	-	-
Ground Contact Area	7347 in²	-	-
Track Rollers/Side	8	-	-
Number of Carrier Rollers	1 per side (optional)	-	-
Ground Pressure - LGP	-	-	4.5 psi
Track Gauge - LGP	-	-	69 in
Length - Track on Ground - LGP	-	-	91 in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage	-	-	40
Ground Pressure - LGP, 762 mm (30 in)	-	-	3.9 psi
Length - Track on Ground - LGP, 762 mm (30 in)	-	-	91 in
Shoe Width - LGP	-	-	26 in
Shoe Width - LGP, 762 mm (30 in)	-	-	30 in
Number of Rollers - Each Side	-	-	7
Track Gauge - LGP, 762 mm (30 in)	-	-	73 in
Ground Pressure	-	-	5.7 psi
Length of Track on Ground	-	-	91 in
Number of Shoes - Each Side - Abrasion Undercarriage	-	-	36
Shoe Width - Standard	-	-	20 in
Standards
ROPS	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.	-	-
FOPS	Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.	-	-
Sound	Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)	-	-
Note	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and	-	-
Sound (1)	Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)	-	-
Note (1)	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.	-	-
Note (2)	The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.	-	-
Note (3)	The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).	-	-
Steering and Brakes
Steering Type	Hydraulically Applied Multiple-Disc Steering Clutch	-	-
Brake Type	Spring Applied Multiple- Disc Brake	-	-
Brake Diameter	15.4 in	-	-
Brake Count	10	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Transmission
1.0 Forward	2.5 mile/h	-	-
1.5 Forward	3.4 mile/h	-	-
2.0 Forward	4.5 mile/h	-	-
2.5 Forward	6 mile/h	-	-
3.0 Forward	7.8 mile/h	-	-
1.0 Reverse	3.2 mile/h	-	-
1.5 Reverse	4.2 mile/h	-	-
2.0 Reverse	5.6 mile/h	-	-
2.5 Reverse	7.5 mile/h	-	-
3.0 Reverse	9.8 mile/h	-	-
Transmission Clutch Diameter	17 in	-	-
Type	Planetary powershift	-	-
Transmission Type	-	Cat Planetary Power Shift	-
Converter Drive - Forward 1	-	4.4 mile/h	-
Converter Drive - Forward 2	-	7.7 mile/h	-
Converter Drive - Forward 3	-	13.2 mile/h	-
Converter Drive - Reverse 1	-	4.8 mile/h	-
Converter Drive - Reverse 2	-	8.4 mile/h	-
Converter Drive - Reverse 3	-	14.6 mile/h	-
Direct Drive - Forward 1	-	Lock-up disabled	-
Direct Drive - Forward 2	-	8.1 mile/h	-
Direct Drive - Forward 3	-	14.2 mile/h	-
Direct Drive - Reverse 1	-	5 mile/h	-
Direct Drive - Reverse 2	-	8.9 mile/h	-
Direct Drive - Reverse 3	-	15.6 mile/h	-
Note	-	Travel speeds based on 45/65-45 L-5 46 ply tires.	-
Drive Pumps	-	-	1
Maximum Travel Speed - Forward	-	-	5.6 mile/h
Maximum Travel Speed - Reverse	-	-	6.2 mile/h
Track Motors	-	-	2
Relief Valve Settings	-	-	7033 psi
Blades
10SU ABR - Capacity (SAE J1265)	24.2 yd³	-	-
10SU ABR - Width (over end bits)	194.5 in	-	-
10SU ABR - Height	83.5 in	-	-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	19.98 in	-	-
10SU ABR - Digging Depth - Blade Pitch: Nominal	25.23 in	-	-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	30.08 in³	-	-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	66.14 in	-	-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	53.86 in	-	-
10SU ABR - Ground Clearance - Maximum Tilt LH	56.3 in	-	-
10SU ABR - Ground Clearance - Maximum Tilt RH	56.3 in	-	-
10U ABR - Capacity (SAE J1265)	28.7 yd³	-	-
10U ABR - Width (over end bits)	207.1 in	-	-
10U ABR - Height	83.5 in	-	-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	19.98 in	-	-
10U ABR - Digging Depth - Blade Pitch: Nominal	60 in	-	-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	30.1 in	-	-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	66.1 in	-	-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	53.9 in	-	-
10U ABR - Ground Clearance - Maximum Tilt LH	60.8 in	-	-
10U ABR - Ground Clearance - Maximum Tilt RH	60.8 in	-	-
10U ABR - Weights - Blade Weight*	23585 lb	-	-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)	154888 lb	-	-
Note (1)	Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees	-	-
Note (2)	*Does not include hydraulic controls but includes blade cylinders, pusharms.	-	-
Note (3)	**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	-	-
Blade Capacities	-	30.5 to 44.8 m3 (40 to 58.6 yd3)	-
Ripper - Single Shank
Maximum penetration force * (shank vertical)	49233 lbf	-	-
Maximum penetration depth (standard tip)	59.2 in	-	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	36 in	-	-
Weight	14209 lb	-	-
Note	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	-	-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	53055 lbf	-	-
Maximum penetration depth (standard tip)	78.3 in	-	-
Weight	14548 lb	-	-
Note	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	-	-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	Cat® C27	-	-
Engine Power - Net SAE J1349/ISO 9249** - Forward	603 HP	-	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	722 HP	-	-
Engine Power - Gross SAE J1995* - Forward	631 HP	-	-
Engine Power - Gross SAE J1995* - Reverse	766 HP	-	-
Engine Power - ISO 14396* - Forward	622 HP	-	-
Engine Power - ISO 14396* - Reverse	756 HP	-	-
Displacement	1648 in³	-	-
Bore	5.4 in	-	-
Stroke	6 in	-	-
Emissions	U.S. EPA Tier 2 Equivalent	-	-
Note (1)	*Excludes all fan losses.	-	-
Note (2)	All Engine ratings apply at 1,800 rpm.	-	-
Note (3)	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	-	-
Note (4)	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-	-
Note (5)	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-	-
Fuel Tank Capacities
Fuel Tank - Usable Volume	323.3 gal (US)	-	-
Fuel Tank - Total Volume	335.2 gal (US)	-	-
Hydraulic Controls
Pump Type	Variable displacement piston	-	-
Pump Output - Implement	112 gal/min	-	-
Note (1)	Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).	-	-
Fan Pump	21.7 gal/min	-	-
Note (2)	Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).	-	-
Tilt Cylinder Flow - Rod End Flow	112 gal/min	-	-
Tilt Cylinder Flow - Head End Flow	63.4 gal/min	-	-
Lift Cylinder Relief Valve Setting	4061.1 psi	-	-
Tilt Cylinder Relief Valve Setting	3872.5 psi	-	-
Ripper - Lift - Relief Valve Setting	4061.1 psi	-	-
Ripper - Pitch - Relief Valve Setting	4061.1 psi	-	-
Tank Capacity	32.2 gal (US)	-	-
Cylinder Sizing - Blade Lift - Bore	5.5 in	-	-
Cylinder Sizing - Blade Tilt - Bore	8.3 in	-	-
Cylinder Sizing - Ripper Shank Lift - Bore	8.3 in	-	-
Cylinder Sizing - Ripper Shank Angle - Bore	7.1 in	-	-
Cylinder Sizing - Blade Lift - Stroke	65.1 in	-	-
Cylinder Sizing - Blade Tilt - Stroke	9.5 in	-	-
Cylinder Sizing - Ripper Shank Lift - Stroke	21.1 in	-	-
Cylinder Sizing - Ripper Shank Angle - Stroke	26 in	-	-
Note (3)	Electro-hydraulic pilot valves assist operations of ripper and dozer controls.	-	-
Pump Output	-	-	17.2 gal/min
Relief Valve Settings	-	-	2988 psi
Dimensions (Approximate)
Ground Clearance*	28.5 in	-	-
Track Gauge	100.4 in	-	-
Width - Without Trunnions - 610 mm/24 in ES	130.4 in	-	-
Width - Over Trunnions	148 in	-	-
Height - FOPS Cab*	162.8 in	-	-
Height - Top of Stack*	171.5 in	-	-
Height - ROPS/Canopy*	173.5 in	-	-
Note (1)	*Includes grouser height for total dimensions on hard surfaces.	-	-
Length - Track on Ground	152.8 in	-	-
Overall Length - Basic Tractor	209.6 in	-	-
Length - With SU-Blade	292 in	-	-
Length - With U-Blade	305.1 in	-	-
Length - With Single-Shank Ripper	278.8 in	-	-
Length - With Multi-Shank Ripper	285.1 in	-	-
Overall Length - SU-Blade/SS Ripper	360.6 in	-	-
Height - Top of ROPS	-	18.25 ft	-
Height - Top of Exhaust Pipe	-	17.17 ft	-
Height - Top of Hood	-	13 ft	-
Ground Clearance	-	27 in	-
Centerline of Front Axle to Hitch	-	9.67 ft	-
Centerline of Rear Axle to Edge of Bumper	-	13.75 ft	-
Wheel Base	-	19.25 ft	-
Length - With Blade on Ground	-	44 ft	-
FLUID CAPACITIES
Cooling System Refill – Tier 4 Final Engine	46.2 gal (US)	-	-
Engine Crankcase Sump	27.2 gal (US)	-	-
Power Train - Total Volume	81.4 gal (US)	-	-
Power Train - Refill Volume	74.8 gal (US)	-	-
Final Drives (each)	12.2 gal (US)	-	-
Track Roller Frames (each)	16.9 gal (US)	-	-
Pivot Shaft Oil	9.5 gal (US)	-	-
Hydraulic System Tank	32.2 gal (US)	-	-
Engine
Engine Model	-	Cat C32B	Cat® C3.6
Gross Power	-	907 HP	-
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995	-	900 HP	-
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249	-	814 HP	-
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995	-	907 HP	-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249	-	823 HP	-
Rated Speed	-	1750 r/min	-
Bore	-	5.7 in	-
Stroke	-	6.4 in	-
Displacement	-	1958 in²	220 in³
Peak Torque - 1,200 rpm	-	3139 lb/ft	-
Torque Rise	-	30 %	-
Note (1)	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.	Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)	-	Net torque rise meets SAE J139.	All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Note (3)	-	No engine derating required up to 3050 m (10,000 ft) altitude.	-
Power - Net	-	-	104 HP
Net Power - 2,200 rpm - SAE J1349	-	-	104 HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269	-	-	104 HP
Power Train	-	-	Hydrostatic
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)	-	161 gal/min	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	177 mm × 1760 mm (0.58 ft × 5.8 ft)	-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke	-	267 mm × 286 mm (0.88 ft × 0.94 ft)	-
Service Refill Capacities
Fuel Tank - Standard	-	413 gal (US)	-
Cooling System	-	53 gal (US)	5 gal (US)
Crankcase	-	32 gal (US)	-
Transmission	-	45 gal (US)	-
Differential - Final Drives - Front	-	98 gal (US)	-
Differential - Final Drives - Rear	-	90 gal (US)	-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only	-	77 gal (US)	-
Note (1)	-	- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo	-
Final Drive - Each - LGP	-	-	2.6 gal (US)
Crankcase - With Filter	-	-	2.8 gal (US)
Transmission - Hydraulic Tank	-	-	23.8 gal (US)
Fuel Tank	-	-	51.5 gal (US)
Final Drives - Each Side	-	-	2.6 gal (US)
Diesel Exhaust Fluid (DEF) Tank	-	-	4.9 gal (US)
Axles
Front	-	Fixed	-
Rear	-	Trunnion	-
Brakes
Brakes	-	Meets ISO 3540:2011	-
Hydraulic System - Steering
Steering System - Pump	-	Piston, variable displacement	-
Minimum Turning Radius - Over Blade	-	31 ft	-
Steering System - Circuit	-	Pilot, load sensing	-
Total Steering Angle	-	86 degrees	-
Relief Valve Setting	-	5004 psi	-
Operating Specifications
Operating Weight	-	224647 lb	-
Sound Performance Levels
Sound Performance	-	• The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was	-
Cab
ROPS/FOPS	-	ISO 3471:2008 and ISO 3449:2005 Level II Standards	-
ROPS	-	-	ISO 3471:2008
FOPS	-	-	ISO 3449:2005 Level II
Ripper
Type	-	-	Parallelogram
Number of Shanks	-	-	3
Height	-	-	6.5 in
Weight	-	-	1222 lb
Maximum Digging Depth	-	-	13.3 in
Maximum Reach - Ground Line	-	-	30.2 in
Overall Width	-	-	67.3 in
Maximum Ground Clearance Under Tip	-	-	17.6 in
Dimensions
BLADE: Blade Width - LGP	-	-	126.7 in
Track Gauge - LGP, 762 mm (30 in)	-	-	73 in
BLADE: Digging Depth - LGP	-	-	23.2 in
Track Gauge - LGP	-	-	67.9 in
BLADE: Blade Capacity (SAE) - LGP	-	-	3.06 yd³
BLADE: Blade Width at Maximum Angle - LGP	-	-	115.8 in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP	-	-	52° to 58°
Ground Clearance - LGP, 762 mm (30 in)	-	-	13 in
BLADE: Blade Height - LGP	-	-	39.8 in
BLADE: Blade Lift Height - LGP	-	-	30.2 in
Ground Clearance - LGP	-	-	13 in
Overall Length - With Blade - LGP, 762 mm (30 in)	-	-	169.6 in
Overall Length - With Blade - LGP	-	-	169.6 in
Note	-	-	Abrasion Undercarriage
BLADE: Maximum Tilt - LGP	-	-	17.7 in
BLADE: Maximum Angle (either side) - LGP	-	-	25°
BLADE: Blade Capacity (SAE) - Standard	-	-	2.86 yd³
Track Gauge - Standard	-	-	63 in
BLADE: Digging Depth - Standard	-	-	23.8 in
BLADE: Blade Lift Height - Standard	-	-	30.2 in
Ground Clearance - Standard	-	-	13 in
Overall Length - With Blade - Standard	-	-	170.7 in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard	-	-	52° to 58°
BLADE: Blade Height - Standard	-	-	42.2 in
BLADE: Maximum Tilt - Standard	-	-	15.8 in
BLADE: Blade Width - Standard	-	-	109.5 in
BLADE: Blade Width at Maximum Angle - Standard	-	-	103.8 in
BLADE: Maximum Angle (either side) - Standard	-	-	25°
Length of Basic Dozer (without blade) - Standard	-	-	128.7 in
Dozer Height - Standard	-	-	109 in
Width of Dozer (standard shoes, no blade) - LGP	-	-	92.9 in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)	-	-	103.5 in
Length of Basic Dozer (without blade) - LGP	-	-	128.7 in
Dozer Height - LGP, 762 mm (30 in)	-	-	109 in
Width of Dozer (standard shoes, no blade) - Standard	-	-	83 in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)	-	-	128.7 in
Dozer Height - LGP	-	-	109 in
Retrieval Winch
Maximum Line Pull - Bare Drum	-	-	32150 lb
Control	-	-	Hydraulic
Rope Diameter - Optional	-	-	0.75 in
Drum Capacity - Optional Cable	-	-	195 ft
Maximum Line Speed - Full Drum	-	-	79 ft/min
Drum Capacity - Recommended Cable	-	-	277 ft
Winch Drive	-	-	Hydraulic
Weight	-	-	1747 lb
Maximum Line Pull - Full Drum	-	-	20350 lb
Rope Diameter - Recommended	-	-	0.63 in
Maximum Line Speed - Bare Drum	-	-	50 ft/min
Speed	-	-	Variable
Winch Length	-	-	35.63 in
Drum Diameter	-	-	8 in
Overall width	-	-	27.91 in
Drum Width	-	-	9.65 in
Throat Clearance	-	-	5.6 in
High Performance Winch
Winch length	-	-	27.76 in
Rope diameter – optional	-	-	0.75 in
Maximum line speed – bare drum	-	-	131 ft/min
Maximum line pull – bare drum	-	-	40000 lb
Weight	-	-	1345 lb
Drum capacity – optional	-	-	256 ft
Maximum line speed – full drum	-	-	207 ft/min
Rope diameter – recommended	-	-	0.63 in
Winch drive	-	-	Hydrostatic
Throat clearance	-	-	6.75 in
Drum diameter	-	-	10 in
Overall width	-	-	29.2 in
Drum width	-	-	10.8 in
Maximum line pull – full drum	-	-	25000 lb
Speed	-	-	Variable
Drum capacity – recommended cable	-	-	371 ft
Control	-	-	Hydraulic

Compare Equipment Go Back

D10 Dozer

854 Wheel Dozer

D3 Track-Type Tractor

Engine - U.S. EPA Tier 4 Final/EU Stage V

Weights

Undercarriage

Standards

Steering and Brakes

Air Conditioning System

Transmission

Blades

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Hydraulic Controls

Dimensions (Approximate)

FLUID CAPACITIES

Engine

Hydraulic System - Lift/Tilt

Service Refill Capacities

Axles

Brakes

Hydraulic System - Steering

Operating Specifications

Sound Performance Levels

Cab

Ripper

Dimensions

Retrieval Winch

High Performance Winch

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us