CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D6 XE Dozer
    View Product
    844 Wheel Dozer
    View Product Remove
    854 Wheel Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove

    Engine
    Engine Model Cat C9.3B C27 Cat® Cat C32B Cat® C3.6
    Power - Net 215 HP - - 104 HP
    Net Power - Rated - ISO 9249/SAE J1349 215 HP - - -
    Net Power (Rated) - ISO 9249 (DIN) 219 mhp - - -
    Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2 - -
    Note (1) Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - Net torque rise meets SAE J139. All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - No engine derating required up to 3050 m (10,000 ft) altitude. -
    Note (4) Machine Build Number 20B - - -
    Rated Speed - 1800 r/min 1750 r/min -
    Gross Power - ISO 14396 - 752 HP - -
    Gross Power - SAE J1995 - 766 HP - -
    Net Power - SAE J1349 - Standard Ambient - 699 HP - -
    Net Power - SAE J1349 - High Ambient - 648 HP - -
    Bore - 5.4 in 5.7 in -
    Stroke - 6 in 6.4 in -
    Displacement - 1649.5 in³ 1958 in² 220 in³
    Peak Torque - Speed - 2624 lb/ft - -
    Torque Rise - 18 % 30 % -
    Gross Power - - 907 HP -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - - 900 HP -
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - - 814 HP -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - - 907 HP -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - - 823 HP -
    Peak Torque - 1,200 rpm - - 3139 lb/ft -
    Net Power - 2,200 rpm - SAE J1349 - - - 104 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - - 104 HP
    Power Train - - - Hydrostatic

    Weights
    Operating Weight 51333 lb - 224647 lb 20640 lb
    Operating Weight - LGP - - - 21369 lb
    Operating Weight - LGP, 762 mm/30 in - - - 21810 lb
    Note (2) - - - For machine with ripper, add 554 kg (1,222 lb).
    Note (1) - - - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

    Transmission
    Power Train Electric Drive - - -
    Transmission Type - Cat Planetary Power Shift Cat Planetary Power Shift -
    Converter Drive - Forward 1 - 4.5 mile/h 4.4 mile/h -
    Converter Drive - Forward 2 - 8.3 mile/h 7.7 mile/h -
    Converter Drive - Forward 3 - 14.2 mile/h 13.2 mile/h -
    Converter Drive - Reverse 1 - 4.9 mile/h 4.8 mile/h -
    Converter Drive - Reverse 2 - 9.1 mile/h 8.4 mile/h -
    Converter Drive - Reverse 3 - 15.5 mile/h 14.6 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disabled -
    Direct Drive - Forward 2 - 8.5 mile/h 8.1 mile/h -
    Direct Drive - Forward 3 - 15.2 mile/h 14.2 mile/h -
    Direct Drive - Reverse 1 - 5.4 mile/h 5 mile/h -
    Direct Drive - Reverse 2 - 9.6 mile/h 8.9 mile/h -
    Direct Drive - Reverse 3 - 16.4 mile/h 15.6 mile/h -
    Note - - Travel speeds based on 45/65-45 L-5 46 ply tires. -
    Drive Pumps - - - 1
    Maximum Travel Speed - Forward - - - 5.6 mile/h
    Maximum Travel Speed - Reverse - - - 6.2 mile/h
    Track Motors - - - 2
    Relief Valve Settings - - - 7033 psi

    Service Refill Capacities
    Fuel Tank 90 gal (US) - - 51.5 gal (US)
    DEF Tank 7.4 gal (US) - - -
    Fuel Tank - Standard - 286.6 gal (US) 413 gal (US) -
    Cooling System - 54.9 gal (US) 53 gal (US) 5 gal (US)
    Crankcase - 20 gal (US) 32 gal (US) -
    Transmission - 29.1 gal (US) 45 gal (US) -
    Differential - Final Drives - Front - 71.6 gal (US) 98 gal (US) -
    Differential - Final Drives - Rear - 68.9 gal (US) 90 gal (US) -
    Hydraulic System - Implement and Hydraulic Fan - 68.9 gal (US) - -
    Hydraulic System - Steering and Braking - 34.9 gal (US) - -
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - - 77 gal (US) -
    Note (1) - - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo -
    Final Drive - Each - LGP - - - 2.6 gal (US)
    Crankcase - With Filter - - - 2.8 gal (US)
    Transmission - Hydraulic Tank - - - 23.8 gal (US)
    Final Drives - Each Side - - - 2.6 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.9 gal (US)

    D6 XE Push Arm
    Operating Weight 49388 lb - - -
    Ground Pressure 8 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 7.5 yd³ - - -

    D6 XE LGP (30-in) Push Arm
    Operating Weight 51020 lb - - -
    Ground Pressure 6.6 psi - - -
    Width of Standard Shoe 30 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 7.6 yd³ - - -

    D6 XE LGP (36-in) Push Arm
    Operating Weight 53315 lb - - -
    Ground Pressure 5.3 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade Straight - - -
    Blade Capacity 5 yd³ - - -

    D6 XE VPAT
    Operating Weight 49708 lb - - -
    Ground Pressure 7.2 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade VPAT - - -
    Blade Capacity 5.4 yd³ - - -

    D6 XE LGP (30-in) VPAT
    Operating Weight 51333 lb - - -
    Ground Pressure 5.9 psi - - -
    Width of Standard Shoe 30 in - - -
    Blade VPAT - - -
    Blade Capacity 5.9 yd³ - - -

    D6 XE LGP (36-in) VPAT
    Operating Weight 52512 lb - - -
    Ground Pressure 5.1 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade VPAT - - -
    Blade Capacity 6.5 yd³ - - -

    Sustainability
    Recyclability 98% - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operating Specifications
    Operating Weight - 165089 lb 224647 lb -
    Blade Capacities - 15.9 - 30.7 m3 (20.7 - 40.2 yd3) - -

    Hydraulic System - Lift/Tilt
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - 82 gal/min - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 133 mm × 1535 mm (5.25 in × 60.4 in) 177 mm × 1760 mm (0.58 ft × 5.8 ft) -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 210 mm × 188 mm (8.25 in × 7.4 in) 267 mm × 286 mm (0.88 ft × 0.94 ft) -
    Relief Valve Setting - Bulldozer (Large Pump) - 2700 psi - -
    Relief Valve Setting - Tilt Cylinders (Small Pump) - 2920 psi - -
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - - 161 gal/min -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing -
    Steering System - Pump - Piston, variable displacement Piston, variable displacement -
    Minimum Turning Radius - Over Blade - 34 ft 31 ft -
    Total Steering Angle - 35 ° 86 degrees -
    Maximum Flow - 94.3 gal/min - -
    Relief Valve Setting - 4500 psi 5004 psi -

    Axles
    Front - Fixed Fixed -
    Rear - Trunnion Trunnion -
    Oscillation Angle - 8.5 ° - -

    Brakes
    Brakes - Meets ISO 3540:2011 Meets ISO 3540:2011 -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 115 dB(A) - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 113 dB(A) - -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards ISO 3471:2008 and ISO 3449:2005 Level II Standards -
    ROPS - - - ISO 3471:2008
    FOPS - - - ISO 3449:2005 Level II

    Dimensions (Approximate)
    Height - Top of ROPS - 17.2 ft 18.25 ft -
    Height - Top of Exhaust Pipe - 16.6 ft 17.17 ft -
    Height - Top of Hood - 12.7 ft 13 ft -
    Ground Clearance - 2 ft 27 in -
    Centerline of Front Axle to Hitch - 7.5 ft 9.67 ft -
    Centerline of Rear Axle to Edge of Bumper - 12.5 ft 13.75 ft -
    Wheel Base - 15.1 ft 19.25 ft -
    Length - With Blade on Ground - 36.5 ft 44 ft -

    Blades
    Blade Capacities - - 30.5 to 44.8 m3 (40 to 58.6 yd3) -

    Sound Performance Levels
    Sound Performance - - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was -

    Hydraulic Controls
    Pump Output - - - 17.2 gal/min
    Relief Valve Settings - - - 2988 psi

    Ripper
    Type - - - Parallelogram
    Number of Shanks - - - 3
    Height - - - 6.5 in
    Weight - - - 1222 lb
    Maximum Digging Depth - - - 13.3 in
    Maximum Reach - Ground Line - - - 30.2 in
    Overall Width - - - 67.3 in
    Maximum Ground Clearance Under Tip - - - 17.6 in

    Undercarriage
    Ground Pressure - LGP - - - 4.5 psi
    Track Gauge - LGP - - - 69 in
    Length - Track on Ground - LGP - - - 91 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - - 40
    Ground Pressure - LGP, 762 mm (30 in) - - - 3.9 psi
    Length - Track on Ground - LGP, 762 mm (30 in) - - - 91 in
    Shoe Width - LGP - - - 26 in
    Shoe Width - LGP, 762 mm (30 in) - - - 30 in
    Track Gauge - - - 63 in
    Number of Rollers - Each Side - - - 7
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    Ground Pressure - - - 5.7 psi
    Length of Track on Ground - - - 91 in
    Number of Shoes - Each Side - Abrasion Undercarriage - - - 36
    Shoe Width - Standard - - - 20 in

    Dimensions
    BLADE: Blade Width - LGP - - - 126.7 in
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    BLADE: Digging Depth - LGP - - - 23.2 in
    Track Gauge - LGP - - - 67.9 in
    BLADE: Blade Capacity (SAE) - LGP - - - 3.06 yd³
    BLADE: Blade Width at Maximum Angle - LGP - - - 115.8 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - - 52° to 58°
    Ground Clearance - LGP, 762 mm (30 in) - - - 13 in
    BLADE: Blade Height - LGP - - - 39.8 in
    BLADE: Blade Lift Height - LGP - - - 30.2 in
    Ground Clearance - LGP - - - 13 in
    Overall Length - With Blade - LGP, 762 mm (30 in) - - - 169.6 in
    Overall Length - With Blade - LGP - - - 169.6 in
    Note - - - Abrasion Undercarriage
    BLADE: Maximum Tilt - LGP - - - 17.7 in
    BLADE: Maximum Angle (either side) - LGP - - - 25°
    BLADE: Blade Capacity (SAE) - Standard - - - 2.86 yd³
    Track Gauge - Standard - - - 63 in
    BLADE: Digging Depth - Standard - - - 23.8 in
    BLADE: Blade Lift Height - Standard - - - 30.2 in
    Ground Clearance - Standard - - - 13 in
    Overall Length - With Blade - Standard - - - 170.7 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - - 52° to 58°
    BLADE: Blade Height - Standard - - - 42.2 in
    BLADE: Maximum Tilt - Standard - - - 15.8 in
    BLADE: Blade Width - Standard - - - 109.5 in
    BLADE: Blade Width at Maximum Angle - Standard - - - 103.8 in
    BLADE: Maximum Angle (either side) - Standard - - - 25°
    Length of Basic Dozer (without blade) - Standard - - - 128.7 in
    Dozer Height - Standard - - - 109 in
    Width of Dozer (standard shoes, no blade) - LGP - - - 92.9 in
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - - 103.5 in
    Length of Basic Dozer (without blade) - LGP - - - 128.7 in
    Dozer Height - LGP, 762 mm (30 in) - - - 109 in
    Width of Dozer (standard shoes, no blade) - Standard - - - 83 in
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - - 128.7 in
    Dozer Height - LGP - - - 109 in

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - - 32150 lb
    Control - - - Hydraulic
    Rope Diameter - Optional - - - 0.75 in
    Drum Capacity - Optional Cable - - - 195 ft
    Maximum Line Speed - Full Drum - - - 79 ft/min
    Drum Capacity - Recommended Cable - - - 277 ft
    Winch Drive - - - Hydraulic
    Weight - - - 1747 lb
    Maximum Line Pull - Full Drum - - - 20350 lb
    Rope Diameter - Recommended - - - 0.63 in
    Maximum Line Speed - Bare Drum - - - 50 ft/min
    Speed - - - Variable
    Winch Length - - - 35.63 in
    Drum Diameter - - - 8 in
    Overall width - - - 27.91 in
    Drum Width - - - 9.65 in
    Throat Clearance - - - 5.6 in

    High Performance Winch
    Winch length - - - 27.76 in
    Rope diameter – optional - - - 0.75 in
    Maximum line speed – bare drum - - - 131 ft/min
    Maximum line pull – bare drum - - - 40000 lb
    Weight - - - 1345 lb
    Drum capacity – optional - - - 256 ft
    Maximum line speed – full drum - - - 207 ft/min
    Rope diameter – recommended - - - 0.63 in
    Winch drive - - - Hydrostatic
    Throat clearance - - - 6.75 in
    Drum diameter - - - 10 in
    Overall width - - - 29.2 in
    Drum width - - - 10.8 in
    Maximum line pull – full drum - - - 25000 lb
    Speed - - - Variable
    Drum capacity – recommended cable - - - 371 ft
    Control - - - Hydraulic
    Add a Similar Product: