CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D6 XE Dozer
    View Product
    D9 Dozer
    View Product Remove
    D10 Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove

    Engine
    Engine Model Cat C9.3B - - Cat® C3.6
    Power - Net 215 HP - - 104 HP
    Net Power - Rated - ISO 9249/SAE J1349 215 HP - - -
    Net Power (Rated) - ISO 9249 (DIN) 219 mhp - - -
    Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V - - -
    Note (1) Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a - - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - - -
    Note (4) Machine Build Number 20B - - -
    Displacement - - - 220 in³
    Net Power - 2,200 rpm - SAE J1349 - - - 104 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - - 104 HP
    Power Train - - - Hydrostatic

    Weights
    Operating Weight 51333 lb 110225 lb 154888 lb 20640 lb
    Shipping Weight - 84373 lb 111739 lb -
    Note (1) - D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Note (2) - D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - LGP - - - 21369 lb
    Operating Weight - LGP, 762 mm/30 in - - - 21810 lb

    Transmission
    Power Train Electric Drive - - -
    1.0 Forward - 2.2 mile/h 2.5 mile/h -
    2.0 Forward - 3.9 mile/h 4.5 mile/h -
    3.0 Forward - 6.8 mile/h 7.8 mile/h -
    1.0 Reverse - 2.7 mile/h 3.2 mile/h -
    2.0 Reverse - 4.8 mile/h 5.6 mile/h -
    3.0 Reverse - 8.4 mile/h 9.8 mile/h -
    Type - Planetary powershift Planetary powershift -
    1.5 Forward - - 3.4 mile/h -
    2.5 Forward - - 6 mile/h -
    1.5 Reverse - - 4.2 mile/h -
    2.5 Reverse - - 7.5 mile/h -
    Transmission Clutch Diameter - - 17 in -
    Drive Pumps - - - 1
    Maximum Travel Speed - Forward - - - 5.6 mile/h
    Maximum Travel Speed - Reverse - - - 6.2 mile/h
    Track Motors - - - 2
    Relief Valve Settings - - - 7033 psi

    Service Refill Capacities
    Fuel Tank 90 gal (US) - - 51.5 gal (US)
    DEF Tank 7.4 gal (US) - - -
    Cooling System - - - 5 gal (US)
    Final Drive - Each - LGP - - - 2.6 gal (US)
    Crankcase - With Filter - - - 2.8 gal (US)
    Transmission - Hydraulic Tank - - - 23.8 gal (US)
    Final Drives - Each Side - - - 2.6 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.9 gal (US)

    D6 XE Push Arm
    Operating Weight 49388 lb - - -
    Ground Pressure 8 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 7.5 yd³ - - -

    D6 XE LGP (30-in) Push Arm
    Operating Weight 51020 lb - - -
    Ground Pressure 6.6 psi - - -
    Width of Standard Shoe 30 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 7.6 yd³ - - -

    D6 XE LGP (36-in) Push Arm
    Operating Weight 53315 lb - - -
    Ground Pressure 5.3 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade Straight - - -
    Blade Capacity 5 yd³ - - -

    D6 XE VPAT
    Operating Weight 49708 lb - - -
    Ground Pressure 7.2 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade VPAT - - -
    Blade Capacity 5.4 yd³ - - -

    D6 XE LGP (30-in) VPAT
    Operating Weight 51333 lb - - -
    Ground Pressure 5.9 psi - - -
    Width of Standard Shoe 30 in - - -
    Blade VPAT - - -
    Blade Capacity 5.9 yd³ - - -

    D6 XE LGP (36-in) VPAT
    Operating Weight 52512 lb - - -
    Ground Pressure 5.1 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade VPAT - - -
    Blade Capacity 6.5 yd³ - - -

    Sustainability
    Recyclability 98% - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - Cat® C18 - -
    Engine Power - Net SAE J1349/ISO 9249 - 452 HP - -
    Bore - 5.7 in³ - -
    Stroke - 7.2 in - -
    Displacement - 1106 in³ - -
    Engine Power - Gross SAE J1995 - 487 HP - -
    Engine Power - ISO 14396 - 479 HP - -
    Emissions - U.S. EPA Tier 2 or Tier 3 equivalent - -
    Note (1) - All engine ratings apply at 1,750 rpm. - -
    Note (2) - No derating required up to 4267 m (14,000 ft) altitude. - -

    Undercarriage
    Shoe Type - Extreme Service Extreme Service (ES) -
    Width - Shoe - 24 in 24 in -
    Shoes/Side - 43 44 -
    Grouser Height - 3.3 in 3.7 in -
    Pitch - 9.4 in 10.2 in -
    Ground Clearance - 18.1 in 28.5 in -
    Track Gauge - 88.6 in 100.4 in 63 in
    Length - Track on Ground - 136.6 in 152.8 in -
    Ground Contact Area - 45.6 ft² 7347 in² -
    Track Rollers/Side - 8 8 -
    Number of Carrier Rollers - 1 per side (optional) 1 per side (optional) -
    Ground Pressure - LGP - - - 4.5 psi
    Track Gauge - LGP - - - 69 in
    Length - Track on Ground - LGP - - - 91 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - - 40
    Ground Pressure - LGP, 762 mm (30 in) - - - 3.9 psi
    Length - Track on Ground - LGP, 762 mm (30 in) - - - 91 in
    Shoe Width - LGP - - - 26 in
    Shoe Width - LGP, 762 mm (30 in) - - - 30 in
    Number of Rollers - Each Side - - - 7
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    Ground Pressure - - - 5.7 psi
    Length of Track on Ground - - - 91 in
    Number of Shoes - Each Side - Abrasion Undercarriage - - - 36
    Shoe Width - Standard - - - 20 in

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. -
    FOPS - Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. -
    Sound - The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling Operator Sound Pressure Level (ISO 6396:2008): 78 db(A) -
    Sound (1) - The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A) -
    Sound (2) - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. - -
    Note - - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and -
    Note (1) - - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. -
    Note (2) - - The sound levels listed above include both measurement uncertainty and uncertainty due to production variation. -
    Note (3) - - The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A). -

    Steering and Brakes
    Steering Type - Differential Hydraulically Applied Multiple-Disc Steering Clutch -
    Brake Type - Spring Applied Wet Disc Spring Applied Multiple- Disc Brake -
    Brake Diameter - 15.5 in 15.4 in -
    Brake Count - 8 10 -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C18 Cat® C27 -
    Bore - 5.7 in³ 5.4 in -
    Stroke - 7.2 in³ 6 in -
    Displacement - 1106 in³ 1648 in³ -
    Engine Power - Gross SAE J1995 - 477 HP - -
    Engine Power - ISO 14396 - 468 HP - -
    Engine Power - Net SAE J1349/ISO 9249 - 440 HP - -
    Emissions - U.S. EPA Tier 4 / EU Stage V U.S. EPA Tier 4 Final/EU Stage V -
    Note (1) - All Engine ratings apply at 1,750 rpm. *Excludes all fan losses. -
    Note (2) - No derating required up to 2499 m (8,200 ft). All Engine ratings apply at 1,800 rpm. -
    Engine Power - Net SAE J1349/ISO 9249** - Forward - - 602 HP -
    Engine Power - Gross SAE J1995* - Forward - - 631 HP -
    Engine Power - Gross SAE J1995* - Reverse - - 766 HP -
    Engine Power - ISO 14396* - Forward - - 620 HP -
    Engine Power - ISO 14396* - Reverse - - 754 HP -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - - 722 HP -
    Note (3) - - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). -
    Note (4) - - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
    Note (5) - - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) - 254 gal (US) - -
    DEF Tank (Tier 4 only) - 9.5 gal (US) - -
    Fuel Tank (Fast Fill) - 248 gal (US) - -
    Cooling System - 21 gal (US) - -
    Engine Crankcase* - 10 gal (US) - -
    Powertrain - 40 gal (US) - -
    Final Drives (each) - 4 gal (US) 12.2 gal (US) -
    Roller Frames (each) - 12 gal (US) - -
    Pivot Shaft Oil - 8 gal (US) 9.5 gal (US) -
    Hydraulic System Tank - 24 gal (US) 32.2 gal (US) -
    Note - *With oil filters. - -
    Note 2 - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or - -
    Note 3 - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - -
    Note 4 - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - -
    Cooling System Refill – Tier 4 Final Engine - - 46.2 gal (US) -
    Engine Crankcase Sump - - 27.2 gal (US) -
    Power Train - Total Volume - - 81.4 gal (US) -
    Power Train - Refill Volume - - 74.8 gal (US) -
    Track Roller Frames (each) - - 16.9 gal (US) -

    Hydraulic Controls
    Pump Type - Piston-type geared to flywheel Variable displacement piston -
    Pump Output - Steering - 96 gal/min - -
    Fan Pump - 21 gal/min 21.7 gal/min -
    Tilt Cylinder Flow - Rod End Flow - 53 gal/min 112 gal/min -
    Tilt Cylinder Flow - Head End Flow - 53 gal/min 63.4 gal/min -
    Lift Cylinder Relief Valve Setting - 3800 lbf/in 4061.1 psi -
    Tilt Cylinder Relief Valve Setting - 2799 psi 3872.5 psi -
    Ripper - Lift - Relief Valve Setting - 3800 psi 4061.1 psi -
    Ripper - Pitch - Relief Valve Setting - 3800 psi 4061.1 psi -
    Steering System - Pressure - 5874 psi - -
    Tank Capacity - 24 gal/min 32.2 gal (US) -
    Note (1) - Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi). -
    Note (2) - Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi). -
    Note (3) - Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) Electro-hydraulic pilot valves assist operations of ripper and dozer controls. -
    Pump Output - Implement - - 112 gal/min -
    Cylinder Sizing - Blade Lift - Bore - - 5.5 in -
    Cylinder Sizing - Blade Tilt - Bore - - 8.3 in -
    Cylinder Sizing - Ripper Shank Lift - Bore - - 8.3 in -
    Cylinder Sizing - Ripper Shank Angle - Bore - - 7.1 in -
    Cylinder Sizing - Blade Lift - Stroke - - 65.1 in -
    Cylinder Sizing - Blade Tilt - Stroke - - 9.5 in -
    Cylinder Sizing - Ripper Shank Lift - Stroke - - 21.1 in -
    Cylinder Sizing - Ripper Shank Angle - Stroke - - 26 in -
    Pump Output - - - 17.2 gal/min
    Relief Valve Settings - - - 2988 psi

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - 17.8 yd³ - -
    Blade Width (over end bits) - 171.3 in - -
    Blade Height - 76.1 in - -
    Maximum Digging Depth - 23.9 in - -
    Ground Clearance at Full Lift - 56 in - -
    Maximum Tilt - 37 in - -
    Blade Weight - 10587 lb - -
    Total Operating Weight* (with blade and single-shank ripper) - 110205 lb - -
    Note - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Blade - Universal
    Blade Capacity (SAE J1265) - 21.7 yd³ - -
    Blade Width (over end bits) - 184.3 in - -
    Blade Height - 76.1 in - -
    Maximum Digging Depth - 23.9 in - -
    Ground Clearance at Full Lift - 56 in - -
    Maximum Tilt - 39.9 in - -
    Blade Weight - 12016 lb - -
    Total Operating Weight* (with blade and single-shank ripper) - 111362 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 35520 lbf 49233 lbf -
    Maximum penetration depth (standard tip) - 48.5 in 59.2 in -
    Pryout Force - 74637 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 34.7 in 36 in -
    Number of Pockets - 1 - -
    Weight - 10701 lb 14209 lb -
    Total Operating Weight* (with SU Blade and noted ripper) - 110205 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 38667 lbf 53055 lbf -
    Maximum penetration depth (standard tip) - 68 in 78.3 in -
    Pryout Force - 74412 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 32.2 in - -
    Number of Pockets - 1 - -
    Weight - 10981 lb 14548 lb -
    Total Operating Weight* (with SU Blade and noted ripper) - 110485 lb - -
    Note - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical - 34621 lbf - -
    Maximum Penetration - Standard Tip - 31.4 in - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 81156 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - 34.6 in - -
    Number of Pockets - 3 - -
    Weight - 12136 lb - -
    Total Operating Weight* - With SU-Blade and Ripper - 111739 lb - -
    Note - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Dimensions (Approximate)
    Ground Clearance* - 18.1 in 28.5 in -
    Track Gauge - 88.6 in 100.4 in -
    Width - Without Trunnions - Standard Shoe - 113 in - -
    Width - Over Trunnions - 130.3 in 148 in -
    Height - FOPS Cab* - 150.4 in 162.8 in -
    Height - Top of Stack* - 152.6 in 171.5 in -
    Height - ROPS/Canopy* - 157.5 in 173.5 in -
    Drawbar Height (Center of Clevis)* - 30 in - -
    Length - Track on Ground - 136.6 in 152.8 in -
    Overall Length - Basic Tractor - 193.3 in 209.6 in -
    Length - Basic Tractor - With Drawbar - 206.4 in - -
    Length - Basic Tractor - With Winch - 218.3 in - -
    Length - With SU-Blade** - 259.9 in - -
    Length - With U-Blade - 274.3 in 305.1 in -
    Length - With Single-Shank Ripper - 257 in 278.8 in -
    Length - With Multi-Shank Ripper - 257.4 in 285.1 in -
    Overall Length - SU-Blade/SS Ripper - 323.6 in 360.6 in -
    Note (1) - *Includes grouser height for total dimensions on hard surfaces. *Includes grouser height for total dimensions on hard surfaces. -
    Width - Without Trunnions - 610 mm/24 in ES - - 130.4 in -
    Length - With SU-Blade - - 292 in -

    Winches
    Winch Model - PA 140VS - -
    Weight* - 3950 lb - -
    Oil Capacity - 4 gal (US) - -
    Drum Width - 12.6 in - -
    Wire Cable Diameter - Recommended - 1.13 in - -
    Wire Cable Diameter - Optional - 1.25 ft - -
    Maximum Drum Capacity - Recommended Cable Length - 257 in - -
    Maximum Drum Capacity - Optional Cable Length - 204 ft - -
    Wire Cable Ferrule Size - Outside Diameter - 2.4 in - -
    Wire Cable Ferrule Size - Length - 2.8 in - -
    Note - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). - -
    Note (2) - Variable speed, hydraulically driven, dual braking system, three-roller fairlead. - -

    Blades
    10SU ABR - Capacity (SAE J1265) - - 24.2 yd³ -
    10SU ABR - Width (over end bits) - - 194.5 in -
    10SU ABR - Height - - 83.5 in -
    10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - - 19.98 in -
    10SU ABR - Digging Depth - Blade Pitch: Nominal - - 25.23 in -
    10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - - 30.08 in³ -
    10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - - 66.14 in -
    10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - - 53.86 in -
    10SU ABR - Ground Clearance - Maximum Tilt LH - - 56.3 in -
    10SU ABR - Ground Clearance - Maximum Tilt RH - - 56.3 in -
    10U ABR - Capacity (SAE J1265) - - 28.7 yd³ -
    10U ABR - Width (over end bits) - - 207.1 in -
    10U ABR - Height - - 83.5 in -
    10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - - 19.98 in -
    10U ABR - Digging Depth - Blade Pitch: Nominal - - 60 in -
    10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - - 30.1 in -
    10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - - 66.1 in -
    10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - - 53.9 in -
    10U ABR - Ground Clearance - Maximum Tilt LH - - 60.8 in -
    10U ABR - Ground Clearance - Maximum Tilt RH - - 60.8 in -
    10U ABR - Weights - Blade Weight* - - 23585 lb -
    10U ABR - Weights - Total Operating Weight** (with blade and SS ripper) - - 154888 lb -
    Note (1) - - Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees -
    Note (2) - - *Does not include hydraulic controls but includes blade cylinders, pusharms. -
    Note (3) - - **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - - Cat® C27 -
    Engine Power - Net SAE J1349/ISO 9249** - Forward - - 603 HP -
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - - 722 HP -
    Engine Power - Gross SAE J1995* - Forward - - 631 HP -
    Engine Power - Gross SAE J1995* - Reverse - - 766 HP -
    Engine Power - ISO 14396* - Forward - - 622 HP -
    Engine Power - ISO 14396* - Reverse - - 756 HP -
    Displacement - - 1648 in³ -
    Bore - - 5.4 in -
    Stroke - - 6 in -
    Emissions - - U.S. EPA Tier 2 Equivalent -
    Note (1) - - *Excludes all fan losses. -
    Note (2) - - All Engine ratings apply at 1,800 rpm. -
    Note (3) - - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). -
    Note (4) - - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
    Note (5) - - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -

    Fuel Tank Capacities
    Fuel Tank - Usable Volume - - 323.3 gal (US) -
    Fuel Tank - Total Volume - - 335.2 gal (US) -

    Ripper
    Type - - - Parallelogram
    Number of Shanks - - - 3
    Height - - - 6.5 in
    Weight - - - 1222 lb
    Maximum Digging Depth - - - 13.3 in
    Maximum Reach - Ground Line - - - 30.2 in
    Overall Width - - - 67.3 in
    Maximum Ground Clearance Under Tip - - - 17.6 in

    Dimensions
    BLADE: Blade Width - LGP - - - 126.7 in
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    BLADE: Digging Depth - LGP - - - 23.2 in
    Track Gauge - LGP - - - 67.9 in
    BLADE: Blade Capacity (SAE) - LGP - - - 3.06 yd³
    BLADE: Blade Width at Maximum Angle - LGP - - - 115.8 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - - 52° to 58°
    Ground Clearance - LGP, 762 mm (30 in) - - - 13 in
    BLADE: Blade Height - LGP - - - 39.8 in
    BLADE: Blade Lift Height - LGP - - - 30.2 in
    Ground Clearance - LGP - - - 13 in
    Overall Length - With Blade - LGP, 762 mm (30 in) - - - 169.6 in
    Overall Length - With Blade - LGP - - - 169.6 in
    Note - - - Abrasion Undercarriage
    BLADE: Maximum Tilt - LGP - - - 17.7 in
    BLADE: Maximum Angle (either side) - LGP - - - 25°
    BLADE: Blade Capacity (SAE) - Standard - - - 2.86 yd³
    Track Gauge - Standard - - - 63 in
    BLADE: Digging Depth - Standard - - - 23.8 in
    BLADE: Blade Lift Height - Standard - - - 30.2 in
    Ground Clearance - Standard - - - 13 in
    Overall Length - With Blade - Standard - - - 170.7 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - - 52° to 58°
    BLADE: Blade Height - Standard - - - 42.2 in
    BLADE: Maximum Tilt - Standard - - - 15.8 in
    BLADE: Blade Width - Standard - - - 109.5 in
    BLADE: Blade Width at Maximum Angle - Standard - - - 103.8 in
    BLADE: Maximum Angle (either side) - Standard - - - 25°
    Length of Basic Dozer (without blade) - Standard - - - 128.7 in
    Dozer Height - Standard - - - 109 in
    Width of Dozer (standard shoes, no blade) - LGP - - - 92.9 in
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - - 103.5 in
    Length of Basic Dozer (without blade) - LGP - - - 128.7 in
    Dozer Height - LGP, 762 mm (30 in) - - - 109 in
    Width of Dozer (standard shoes, no blade) - Standard - - - 83 in
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - - 128.7 in
    Dozer Height - LGP - - - 109 in

    Cab
    ROPS - - - ISO 3471:2008
    FOPS - - - ISO 3449:2005 Level II

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - - 32150 lb
    Control - - - Hydraulic
    Rope Diameter - Optional - - - 0.75 in
    Drum Capacity - Optional Cable - - - 195 ft
    Maximum Line Speed - Full Drum - - - 79 ft/min
    Drum Capacity - Recommended Cable - - - 277 ft
    Winch Drive - - - Hydraulic
    Weight - - - 1747 lb
    Maximum Line Pull - Full Drum - - - 20350 lb
    Rope Diameter - Recommended - - - 0.63 in
    Maximum Line Speed - Bare Drum - - - 50 ft/min
    Speed - - - Variable
    Winch Length - - - 35.63 in
    Drum Diameter - - - 8 in
    Overall width - - - 27.91 in
    Drum Width - - - 9.65 in
    Throat Clearance - - - 5.6 in

    High Performance Winch
    Winch length - - - 27.76 in
    Rope diameter – optional - - - 0.75 in
    Maximum line speed – bare drum - - - 131 ft/min
    Maximum line pull – bare drum - - - 40000 lb
    Weight - - - 1345 lb
    Drum capacity – optional - - - 256 ft
    Maximum line speed – full drum - - - 207 ft/min
    Rope diameter – recommended - - - 0.63 in
    Winch drive - - - Hydrostatic
    Throat clearance - - - 6.75 in
    Drum diameter - - - 10 in
    Overall width - - - 29.2 in
    Drum width - - - 10.8 in
    Maximum line pull – full drum - - - 25000 lb
    Speed - - - Variable
    Drum capacity – recommended cable - - - 371 ft
    Control - - - Hydraulic
    Add a Similar Product: