CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    982 XE
    View Product
    986 Wheel Loader
    View Product Remove
    988 Wheel Loader
    View Product Remove

    Engine
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 404 HP - -
    Engine Model Cat C13 C15 Cat® Cat® C18 ™
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - -
    Engine Power @ 1,700 rpm – ISO 14396:2002 432 HP - -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1636 lb/ft - -
    Gross Power @ 1,700 rpm – SAE J1995:2014 436 HP - -
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 1515 lb/ft - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1620 lb/ft - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - -
    Displacement 12.5L 927 in² 1105 in³
    Peak Power Speed - 1600 1500/rpm
    Peak Power Speed - Gross - SAE J1995 - 456 HP -
    Engine Power - ISO 14396 - 449 HP -
    Net Power - SAE J1349 - 373 HP -
    Rated Speed - 2000 1700/min
    Rated Speed - 2,000 rpm - EEC 80/1269 - 373 HP -
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - 378 HP -
    Rated Speed - 2,000 rpm - ISO 9249 - 373 HP -
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - 378 HP -
    Bore - 5.4 in 5.7 in
    Stroke - 6.75 in 7.2 in
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 lb/ft -
    Torque Rise - 16% 58 %
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
    Net Power - SAE J1349:2011 - - 538 HP
    Engine Power - ISO 14396:2002 - - 580 HP
    Gross Power - SAE J1995:2014 - - 588 HP
    Peak Torque - 1,200 rpm - - 2230 lb/ft

    Weights
    Operating Weight 78264 lb - -
    Note Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun - -

    Bucket Capacities
    Bucket Range 4.8-17.2 m³ 6.25-22.5 yd³ - -

    Transmission
    Forward - 1 3.9 mile/h 5 mile/h 4 mile/h
    Forward - 2 7.3 mile/h 8 mile/h 7.2 mile/h
    Forward - 3 13 mile/h - 12.7 mile/h
    Forward - 4 24.5 mile/h - 21.6 mile/h
    Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. - -
    Reverse - 1 4.4 mile/h 5 mile/h 4.7 mile/h
    Reverse - 2 8.4 mile/h 8 mile/h 8.3 mile/h
    Reverse - 3 17.4 mile/h - 14.4 mile/h
    Transmission Type - Cat planetary power shift Cat planetary powershift
    Direct Drive - Forward 2 - 8 mile/h 7.8 mile/h
    Direct Drive - Forward 3 - 14 mile/h 13.9 mile/h
    Direct Drive - Forward 4 - 24 mile/h 24.4 mile/h
    Direct Drive - Reverse 2 - 9 mile/h 8.9 mile/h
    Direct Drive - Reverse 3 - 16 mile/h 15.8 mile/h
    Direct Drive - Reverse 4 - 25.4 mile/h -
    Direct Drive - Forward 1 - - Lock-up disabled
    Direct Drive - Reverse 1 - - 5 mile/h

    Sound
    Note (1) * For machines in European Union countries and in countries that adopt the “EU Directives.” - -
    Note (2) European Union Directive “2000/14/EC” as amended by “2005/88/EC.” - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 107 - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 110 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 75 - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A) - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operating Specifications
    Breakout Force 59060 lbf - -
    Note (1) For a machine configuration as defined under Weight. - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 22418 kg - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 46526 lb - -
    Operating Weight - Standard - 97785 lb -
    Operating Weight - High Lift - 104005 lb -
    Rated Payload - Standard (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (Standard) - 14 ton (US) -
    Rated Payload - High Lift (Quarry Face) - 11 ton (US) -
    Rated Payload - Loose Material (High Lift) - 12.1 ton (US) -
    Bucket Capacity Range - 5-10,3 m³ (6,5-13,5 yd.³) 4.7-13 m3 (6.2-17 yd3)
    Cat Truck Match - Standard - 770/735/740/745 770～772
    Cat Truck Match - High Lift - 772/773 773～775
    Operating Weight - - 112574 lb
    Rated Payload - Quarry Face - - 12.5 t
    Rated Payload - Loose Material - - 16 t

    Service Refill Capacities
    Cooling System 13.7 gal (US) - 31.7 gal (US)
    Crankcase 9.8 gal (US) 9 gal (US) 15.9 gal (US)
    DEF Tank 5.5 gal (US) - -
    Differential - Final Drives - Front 24.3 gal (US) - 49.1 gal (US)
    Differential - Final Drives - Rear 24.3 gal (US) - 49.1 gal (US)
    Fuel Tank 112.5 gal (US) 141 gal (US) 188 gal (US)
    Hydraulic Tank 40.4 gal (US) - -
    Transmission 20.3 gal (US) 20 gal (US) 31.7 gal (US)
    Fuel Tank - Short Lift - 127 gal (US) -
    Cooling Systems - 26 gal (US) -
    Diesel Exhaust Fluid Tank - 6 gal (US) 8.7 gal (US)
    Axle Oil - Differentials and Final Drives - Front - 49 gal (US) -
    Axle Oil - Differentials and Final Drives - Rear - 45 gal (US) -
    Hydraulic System Factory Fill - 87 gal (US) 125.5 gal (US)
    Hydraulic System - Tank Only - 34 gal (US) 63.4 gal (US)
    Coolant (Validated by Test Cell Fill Quantities) - - 33 gal (US)
    Transmission - Validated by Test Cell Fill Quantities - - 29 gal (US)

    Hydraulic System
    Implement System - Maximum Operating Pressure 4975 psi - -
    Implement System - Maximum Pump Output at 2,250 rpm 119 gal/min - -
    Hydraulic Cycle Time - Total 10.1 seconds - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 9.4 ft - -
    Centerline of Rear Axle to Hitch 6.3 ft - -
    Ground Clearance 1.4 ft - -
    Height - Top of Exhaust Pipe 12.4 ft - -
    Height - Top of Hood 10 ft - -
    Height - Top of ROPS 12.6 ft - -
    Hinge Pin Height at Carry 2.11 ft - -
    Hinge Pin Height at Maximum Lift 16.1 ft - -
    Lift Arm Clearance at Maximum Lift 13.4 ft - -
    Overall Length - Without Bucket 29.11 ft - -
    Tread Width 8.4 ft - -
    Wheel Base 12.6 ft - -
    Width over Tires (Loaded) 11.5 ft - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight 8.95 ft - -
    Centerline of Rear Axle to Hitch 6.3 ft - -
    Ground Clearance 428 mm - -
    Height - Top of Exhaust Pipe 3736 mm - -
    Height - Top of Hood 3036 mm - -
    Height - Top of ROPS 3801 mm - -
    Hinge Pin Height at Carry 2.7 ft - -
    Hinge Pin Height at Maximum Lift 4741 mm - -
    Lift Arm Clearance at Maximum Lift 3902 mm - -
    Overall Length - Without Bucket 8597 mm - -
    Tread Width 8.4 ft - -
    Wheel Base 3800 mm - -
    Width over Tires (Loaded) 11.5 ft - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Load Sense EH- Positive Flow Control, Flow Sharing
    Lift/Tilt System - Pump - 2 × 110 cc variable displacement -
    Maximum Flow at 2,165 rpm - 123 gal/min -
    Relief Valve Setting - Lift/Tilt - 4050 psi 4757 psi
    Lift Cylinder - Bore - 7.5 in -
    Lift Cylinder - Stroke - 45 in -
    Tilt Cylinder - Bore - 6.7 in -
    Tilt Cylinder - Stroke - 28.4 in -
    Lift/Tilt System - - Variable displacement piston
    Maximum Flow at 1,400-1,860 rpm - - 153 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 210 mm × 1050 mm (8.7 in × 41.3 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 269 mm × 685 mm (8.7 in × 27 in)
    Pilot System - - Variable displacement piston
    Relief Valve Setting - Main - - 551 psi

    Hydraulic Cycle Times
    Rack Back - 4.5 s -
    Raise - 9 s -
    Dump - 3.5 s -
    Lower - 5.2 s -
    Lower Float Down - 4.3 s -
    Total Hydraulic Cycle Time - 21.3 s -

    Hydraulic System - Steering
    Steering System - Circuit - Load Sense Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Piston, variable displacement
    Maximum Flow at 1,400 rpm - 52 gal/min -
    Steering Cut Off Pressure - 4000 psi -
    Total Steering Angle - 70° 86 °
    Maximum Flow - - 71.3 gal/min
    Relief Valve Setting - Steering - - 4351 psi
    Steering Cycle Times - High Idle - - 3.4 s
    Steering Cycle Times - Low Idle - - 5.6 s

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - ±12.5° 13 °
    Oscillation Angle - Chain Arrangement - ±8.5° -

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		-

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    		-

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.5 ft 13.8 ft
    Ground to Top of Exhaust Stacks - 13.3 ft 14.8 ft
    Ground to Top of Hood - 10.7 ft 10.9 ft
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft 1.9 ft
    Reach - Maximum Lift - 7.1 ft 6.5 ft
    Clearance at Maximum Lift - 10.1 ft 11.9 ft
    B-Pin Height - Maximum Lift - 16.1 ft 18 ft
    Maximum Overall Height - Bucket Raised - 22.4 ft 24.5 ft
    Rear Axle - Centerline to Bumper - 10.3 ft 10.5 ft
    Wheel Base - 12.5 ft 14.9 ft
    Maximum Overall Length - 36.6 ft 39.3 ft
    Front Axle Centerline to Bucket Tip - 13.8 ft 14 ft
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.5 ft 13.8 ft
    Ground to Top of Exhaust Stacks - 13.3 ft 14.8 ft
    Ground to Top of Hood - 10.7 ft 10.9 ft
    Ground to Center of Front Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft 1.9 ft
    Reach - Maximum Lift - 7.4 ft 6.8 ft
    Clearance at Maximum Lift - 11.6 ft 13.3 ft
    B-Pin Height - Maximum Lift - 17.6 ft 19.3 ft
    Maximum Overall Height - Bucket Raised - 23.9 ft 25.8 ft
    Rear Axle - Centerline to Bumper - 10.3 ft 10.5 ft
    Wheel Base - 12.5 ft 14.9 ft
    Maximum Overall Length - 38 ft 40.7 ft
    Front Axle Centerline to Bucket Tip - 15.3 ft 15.3 ft
    Note -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
    		 -

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Reach at Maximum Lift - 8 ft -
    Clearance at Maximum Lift - 10.7 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Maximum Overall Height, Bucket Raised - 20.9 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35 ft -
    Front Axle Centerline to Bucket Tip - 12.2 ft -

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Ground to Center of Rear Axle - 3.2 ft -
    Ground to Fuel Tank Clearance - 2.3 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    B-Pin Height at Maximum Lift - 15 ft -
    Rear Axle Center Line to Bumper - 10.3 ft -
    Wheel Base - 12.5 ft -
    Maximum Overall Length - 35.4 ft -
    Front Axle Centerline to Bucket Tip - 12.6 ft -

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - - 4.5 s
    Raise - - 8 s
    Dump - - 2.2 s
    Lower Float Down - - 3.5 s
    Total Hydraulic Cycle Time - Empty Bucket - - 18.2 s

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 111 dB(A)

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 112 dB(A)

    Buckets
    Bucket Capacities - - 4.7-13 m3 (6.2-17 yd3)
    Add a Similar Product: