Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
404 HP
-
-
Engine Model
Cat C13
Cat® C18 ™
-
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
-
-
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
-
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
-
Engine Power @ 1,700 rpm – ISO 14396:2002
432 HP
-
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
1636 lb/ft
-
-
Gross Power @ 1,700 rpm – SAE J1995:2014
436 HP
-
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
1515 lb/ft
-
-
Displacement
12.5L
1105 in³
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
1620 lb/ft
-
-
Net Power - SAE J1349
-
538 HP
-
Engine Power - ISO 14396:2002
-
580 HP
-
Gross Power - SAE J1995:2014
-
588 HP
-
Rated Speed
-
1,700 rpm
-
Peak Power Speed
-
1,500 rpm
-
Emissions
-
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
-
Bore
-
5.7 in
-
Stroke
-
7.2 in
-
Peak Torque - 1,200 rpm - SAE J1995
-
2230 ft·lbf
-
Torque Rise
-
58%
-
Weights
Operating Weight
78264 lb
-
-
Note
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun
-
-
Bucket Capacities
Bucket Range
4.8-17.2 m³ 6.25-22.5 yd³
-
-
Transmission
Forward - 1
3.9 mile/h
-
-
Forward - 2
7.3 mile/h
-
-
Forward - 3
13 mile/h
-
-
Forward - 4
24.5 mile/h
-
-
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius.
-
-
Reverse - 1
4.4 mile/h
-
-
Reverse - 2
8.4 mile/h
-
-
Reverse - 3
17.4 mile/h
-
-
Transmission Type
-
Cat switched reluctance electric drive
-
Forward 1 (virtual)
-
4.3 mile/h
-
Forward 2 (virtual)
-
7 mile/h
-
Forward 3 (virtual)
-
13.8 mile/h
-
Forward 4 (virtual)
-
20 mile/h
-
Reverse 1 (virtual)
-
4.3 mile/h
-
Reverse 2 (virtual)
-
7 mile/h
-
Reverse 3 (virtual)
-
17.5 mile/h
-
Sound
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives.”
-
-
Note (2)
European Union Directive “2000/14/EC” as amended by “2005/88/EC.”
-
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
107
-
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
110 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
75
-
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Operating Specifications
Breakout Force
59060 lbf
-
-
Note (1)
For a machine configuration as defined under Weight.
-
-
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
22418 kg
-
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
46526 lb
-
-
Operating Weight
-
116362 lb
-
Operating Weight - Standard
-
116362 lb
-
Operating Weight - High Lift
-
119618 lb
-
Rated Payload - Standard (Quarry Face)
-
12.5 ton (US)
-
Rated Payload - Loose Material (Standard)
-
16 ton (US)
-
Bucket Capacity Range
-
4.7-13 m3 (6.2-17 yd3)
-
Service Refill Capacities
Cooling System
13.7 gal (US)
-
-
Crankcase
9.8 gal (US)
-
-
DEF Tank
5.5 gal (US)
-
-
Differential - Final Drives - Front
24.3 gal (US)
49 gal (US)
-
Differential - Final Drives - Rear
24.3 gal (US)
49 gal (US)
-
Fuel Tank
112.5 gal (US)
147 gal (US)
-
Hydraulic Tank
40.4 gal (US)
-
-
Transmission
20.3 gal (US)
16 gal (US)
-
Cooling System - Jacket Water
-
30 gal (US)
-
Cooling Systems - Power Train
-
8 gal (US)
-
Engine Crankcase
-
16 gal (US)
-
Diesel Exhaust Fluid Tank
-
8.7 gal (US)
-
Hydraulic System - Implement/Steering
-
126 gal (US)
-
Note
-
All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati
-
Hydraulic System
Implement System - Maximum Operating Pressure
4975 psi
-
-
Implement System - Maximum Pump Output at 2,250 rpm
119 gal/min
-
-
Hydraulic Cycle Time - Total
10.1 seconds
-
-
Dimensions
Note
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires.
-
-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
9.4 ft
-
-
Centerline of Rear Axle to Hitch
6.3 ft
-
-
Ground Clearance
1.4 ft
-
-
Height - Top of Exhaust Pipe
12.4 ft
-
-
Height - Top of Hood
10 ft
-
-
Height - Top of ROPS
12.6 ft
-
-
Hinge Pin Height at Carry
2.11 ft
-
-
Hinge Pin Height at Maximum Lift
16.1 ft
-
-
Lift Arm Clearance at Maximum Lift
13.4 ft
-
-
Overall Length - Without Bucket
29.11 ft
-
-
Tread Width
8.4 ft
-
-
Wheel Base
12.6 ft
-
-
Width over Tires (Loaded)
11.5 ft
-
-
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
8.95 ft
-
-
Centerline of Rear Axle to Hitch
6.3 ft
-
-
Ground Clearance
428 mm
-
-
Height - Top of Exhaust Pipe
3736 mm
-
-
Height - Top of Hood
3036 mm
-
-
Height - Top of ROPS
3801 mm
-
-
Hinge Pin Height at Carry
2.7 ft
-
-
Hinge Pin Height at Maximum Lift
4741 mm
-
-
Lift Arm Clearance at Maximum Lift
3902 mm
-
-
Overall Length - Without Bucket
8597 mm
-
-
Tread Width
8.4 ft
-
-
Wheel Base
3800 mm
-
-
Width over Tires (Loaded)
11.5 ft
-
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
EH-Positive Flow Control, Flow Sharing
-
Lift/Tilt System - Pump
-
Variable displacement piston
-
Maximum Flow at 1,400-1,600 rpm
-
153 gal/min
-
Relief Valve Setting - Lift/Tilt
-
4757 psi
-
Lift Cylinder - Bore
-
8.7 in
-
Lift Cylinder - Stroke
-
41.3 in
-
Tilt Cylinder - Bore
-
8.7 in
-
Tilt Cylinder - Stroke
-
27 in
-
Hydraulic Cycle Times
Rack Back
-
4.5 s
-
Raise
-
8 s
-
Dump
-
2.2 s
-
Lower Float Down
-
3.5 s
-
Total Hydraulic Cycle Time
-
18.2 s
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, load sensing
-
Steering System - Pump
-
Piston, variable displacement
-
Maximum Flow at 1,400-1,600 rpm
-
71.3 gal/min
-
Steering Cut Off Pressure
-
4351 psi
-
Total Steering Angle
-
86°
-
Steering Cycle Times - High Idle
-
3.4 s
-
Steering Cycle Times - Low Idle
-
5.6 s
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Oscillation Angle
-
13°
-
Brakes
Brakes
-
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
Sound Performance - Tier 4 Final / Stage V - Standard
Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
-
109 dB(A)
-
Sound Performance - Tier 3 / Stage III - Standard
Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
-
110 dB(A)
-
Dimensions (Approximate) - Standard Lift
Ground to Top of ROPS
-
13.8 ft
-
Ground to Top of Exhaust Stacks
-
14.8 ft
-
Ground to Top of Hood
-
10.9 ft
-
Ground to Bumper Clearance
-
3.1 ft
-
Rear Axle - Centerline to Bumper
-
10.5 ft
-
Front Axle Centerline to Bucket Tip
-
14 ft
-
Wheel Base
-
14.9 ft
-
Maximum Overall Length
-
39.3 ft
-
Ground to Lower Hitch Clearance
-
1.9 ft
-
Ground to Center of Axles
-
3.2 ft
-
Clearance at Maximum Lift
-
11.9 ft
-
B-Pin Height - Maximum Lift
-
18 ft
-
Maximum Overall Height - Bucket Raised
-
24.5 ft
-
Reach - Maximum Lift
-
6.5 ft
-
Note
-
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
-
13.8 ft
-
Ground to Top of Exhaust Stacks
-
14.8 ft
-
Ground to Top of Hood
-
10.9 ft
-
Ground to Bumper Clearance
-
3.1 ft
-
Rear Axle - Centerline to Bumper
-
10.5 ft
-
Front Axle Centerline to Bucket Tip
-
15.3 ft
-
Wheel Base
-
14.9 ft
-
Maximum Overall Length
-
40.7 ft
-
Ground to Lower Hitch Clearance
-
1.9 ft
-
Ground to Center of Axles
-
3.2 ft
-
Clearance at Maximum Lift
-
13.3 ft
-
B-Pin Height - Maximum Lift
-
19.3 ft
-
Maximum Overall Height - Bucket Raised
-
25.8 ft
-
Reach - Maximum Lift
-
6.8 ft
-
Note
-
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.