Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011
393 HP
-
-
Engine Model
Cat C13
Cat® C15
-
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
-
-
Note (1)
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards.
-
-
Gross Torque @ 1,200 rpm – SAE J1995:2014
1627 lb/ft
-
-
Engine Torque @ 1,200 rpm – ISO 14396:2002
1612 lb/ft
-
-
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011
1539 lb/ft
-
-
Engine Power @ 1,700 rpm – ISO 14396:2002
420 HP
-
-
Gross Power @ 1,700 rpm – SAE J1995:2014
425 HP
-
-
Note (3)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h
-
-
Rated Speed
-
2000
-
Peak Power Speed
-
1600
-
Engine Power - ISO 14396
-
449 HP
-
Gross Power - SAE J1995
-
456 HP
-
Net Power - SAE J1349
-
373 HP
-
Emissions
-
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
-
Bore
-
5.4 in
-
Stroke
-
6.75 in
-
Displacement
-
927 in³
-
Peak Torque - 1,200 rpm - SAE J1995
-
1778 ft·lbf
-
Torque Rise
-
16%
-
Weights
Operating Weight
66877 lb
-
-
Note
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s
-
-
Bucket Capacities
Bucket Range
4.0-14.5 m³ 5.25-19 yd³
-
-
Transmission
Forward - 1
4.4 mile/h
5 mile/h
-
Forward - 2
8.4 mile/h
8 mile/h
-
Forward - 3
14.9 mile/h
-
-
Forward - 4
24.5 mile/h
-
-
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
-
-
Reverse - 1
5 mile/h
5 mile/h
-
Reverse - 2
9.6 mile/h
8 mile/h
-
Reverse - 3
18.3 mile/h
-
-
Transmission Type
-
Cat planetary power shift
-
Direct Drive - Forward 1
-
Lock-up disabled
-
Direct Drive - Forward 2
-
8 mile/h
-
Direct Drive - Forward 3
-
14 mile/h
-
Direct Drive - Forward 4
-
24 mile/h
-
Direct Drive - Reverse 1
-
Lock-up disabled
-
Direct Drive - Reverse 2
-
9 mile/h
-
Direct Drive - Reverse 3
-
16 mile/h
-
Direct Drive - Reverse 4
-
25.4 mile/h
-
Sound
Note (1)
For machines in European Union countries and in countries that adopt the EU Directives.
-
-
Note (2)
European Union Directive 2000/14/EC as amended by 2005/88/EC.
-
-
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*
110
-
-
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
107 dB(A)
-
-
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
75
-
-
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Operating Specifications
Breakout Force
51008 lbf
-
-
Note (1)
For a machine configuration as defined under Weight.
-
-
Note (2)
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
-
-
Static Tipping Load - Full 40° Turn - No Tire Deflection
20965 kg
-
-
Static Tipping Load - Full 40° Turn - With Tire Deflection
43432 lb
-
-
Operating Weight
-
116858 lb
-
Rated Payload - Quarry Face
-
12.5 ton (US)
-
Bucket Capacity Range
-
6.4-7.6 m3 (8.3-10 yd3)
-
Cat Truck Match - High Lift
-
772/773/775
-
Service Refill Capacities
Cooling System
13.7 gal (US)
27 gal (US)
-
Crankcase
9.8 gal (US)
-
-
DEF Tank
5.5 gal (US)
-
-
Differential - Final Drives - Front
24.3 gal (US)
49 gal (US)
-
Differential - Final Drives - Rear
24.3 gal (US)
45 gal (US)
-
Fuel Tank
112.5 gal (US)
141 gal (US)
-
Hydraulic Tank
40.4 gal (US)
-
-
Transmission
20.3 gal (US)
20 gal (US)
-
Engine Crankcase
-
9 gal (US)
-
Diesel Exhaust Fluid Tank
-
5.5 gal (US)
-
Note
-
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
-
Hydraulic System
Implement System - Maximum Operating Pressure
4975 psi
-
-
Hydraulic Cycle Time - Total
10.1 seconds
-
-
Dimensions
Note
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.
-
-
Dimensions - High Lift
Centerline of Rear Axle to Edge of Counterweight
8.9 ft
-
-
Centerline of Rear Axle to Hitch
6.3 ft
-
-
Ground Clearance
1.5 ft
-
-
Height - Top of Exhaust Pipe
12.5 ft
-
-
Height - Top of Hood
10.1 ft
-
-
Height - Top of ROPS
12.7 ft
-
-
Hinge Pin Height at Carry
2.2 ft
-
-
Hinge Pin Height at Maximum Lift
15.7 ft
-
-
Lift Arm Clearance at Maximum Lift
13.6 ft
-
-
Overall Length - Without Bucket
27.5 ft
-
-
Tread Width
8 ft
-
-
Wheel Base
12.6 ft
-
-
Width over Tires (Loaded)
10.9 ft
-
-
Dimensions - Standard Lift
Centerline of Rear Axle to Edge of Counterweight
8.7 ft
-
-
Centerline of Rear Axle to Hitch
6.3 ft
-
-
Ground Clearance
456 mm
-
-
Height - Top of Exhaust Pipe
3764 mm
-
-
Height - Top of Hood
3064 mm
-
-
Height - Top of ROPS
3829 mm
-
-
Hinge Pin Height at Carry
2 ft
-
-
Hinge Pin Height at Maximum Lift
4554 mm
-
-
Lift Arm Clearance at Maximum Lift
3881 mm
-
-
Overall Length - Without Bucket
8155 mm
-
-
Tread Width
8 ft
-
-
Wheel Base
3800 mm
-
-
Width over Tires (Loaded)
10.9 ft
-
-
Sustainability
Recyclability
98%
96%
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
EH - Load Sense
-
Lift/Tilt System
-
2X x 145 cc Variable displacement piston
-
Maximum Flow at 2,165 rpm
-
159 gal/min
-
Relief Valve Setting - Lift/Tilt
-
4598 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
190 mm x 1216 mm (7.5 in x 48 in)
-
Cylinders, Double Acting - Tilt, Bore and Stroke
-
170 mm x 722 mm (6.7 in x 28.4 in)
-
Pilot System
-
Variable displacement piston
-
Tilt Cylinder - Stroke
-
27 in
-
Hydraulic Cycle Times
Rack Back
-
3.8 s
-
Raise
-
7.5 s
-
Dump
-
3 s
-
Lower Float Down
-
4.6 s
-
Total Hydraulic Cycle Time - Empty Bucket
-
18.9 s
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, load sensing
-
Steering System - Pump
-
Piston, variable displacement
-
Maximum Flow
-
52 gal (US)
-
Relief Valve Setting - Steering
-
4000 psi
-
Total Steering Angle
-
70°
-
Steering Cycle Times - High Idle
-
3 s
-
Steering Cycle Times - Low Idle
-
5.2 s
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Oscillation Angle
-
+/-12.5°
-
Brakes
Brakes
-
ISO 3450:2011
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
110 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
Dimensions (Approximate) - High Lift
Ground to Top of ROPS
-
13.5 ft
-
Ground to Top of Exhaust Stacks
-
13.3 ft
-
Ground to Top of Hood
-
10.7 ft
-
Rear Axle - Centerline to Bumper
-
10.3 ft
-
Front Axle Centerline to Bucket Tip
-
15.7 ft
-
Wheel Base
-
12.5 ft
-
Maximum Overall Length
-
39.5 ft
-
Ground to Lower Hitch Clearance
-
1.5 ft
-
Clearance at Maximum Lift
-
12 ft
-
B-Pin Height - Maximum Lift
-
18.7 ft
-
Maximum Overall Height - Bucket Raised
-
25 ft
-
Reach - Maximum Lift
-
7.7 ft
-
Note
-
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
