Compare Equipment Go Back

980 XE

Engine

Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 393 HP - -
Engine Model Cat C13 - -
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - -
Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards. - -
Gross Torque @ 1,200 rpm – SAE J1995:2014 1627 lb/ft - -
Engine Torque @ 1,200 rpm – ISO 14396:2002 1612 lb/ft - -
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 1539 lb/ft - -
Engine Power @ 1,700 rpm – ISO 14396:2002 420 HP - -
Gross Power @ 1,700 rpm – SAE J1995:2014 425 HP - -
Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - -

Weights

Operating Weight 66877 lb - -
Note Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s - -

Bucket Capacities

Bucket Range 4.0-14.5 m³ 5.25-19 yd³ - -

Transmission

Forward - 1 4.4 mile/h - -
Forward - 2 8.4 mile/h - -
Forward - 3 14.9 mile/h - -
Forward - 4 24.5 mile/h - -
Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. - -
Reverse - 1 5 mile/h - -
Reverse - 2 9.6 mile/h - -
Reverse - 3 18.3 mile/h - -

Sound

Note (1) For machines in European Union countries and in countries that adopt the EU Directives. - -
Note (2) European Union Directive 2000/14/EC as amended by 2005/88/EC. - -
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 110 - -
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A) - -
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A) - -
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 75 - -
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A) - -

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). - -

Operating Specifications

Breakout Force 51008 lbf - -
Note (1) For a machine configuration as defined under Weight. - -
Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
Static Tipping Load - Full 40° Turn - No Tire Deflection 20965 kg - -
Static Tipping Load - Full 40° Turn - With Tire Deflection 43432 lb - -

Service Refill Capacities

Cooling System 13.7 gal (US) - -
Crankcase 9.8 gal (US) - -
DEF Tank 5.5 gal (US) - -
Differential - Final Drives - Front 24.3 gal (US) - -
Differential - Final Drives - Rear 24.3 gal (US) - -
Fuel Tank 112.5 gal (US) - -
Hydraulic Tank 40.4 gal (US) - -
Transmission 20.3 gal (US) - -

Hydraulic System

Implement System - Maximum Operating Pressure 4975 psi - -
Hydraulic Cycle Time - Total 10.1 seconds - -

Dimensions

Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. - -

Dimensions - High Lift

Centerline of Rear Axle to Edge of Counterweight 8.9 ft - -
Centerline of Rear Axle to Hitch 6.3 ft - -
Ground Clearance 1.5 ft - -
Height - Top of Exhaust Pipe 12.5 ft - -
Height - Top of Hood 10.1 ft - -
Height - Top of ROPS 12.7 ft - -
Hinge Pin Height at Carry 2.2 ft - -
Hinge Pin Height at Maximum Lift 15.7 ft - -
Lift Arm Clearance at Maximum Lift 13.6 ft - -
Overall Length - Without Bucket 27.5 ft - -
Tread Width 8 ft - -
Wheel Base 12.6 ft - -
Width over Tires (Loaded) 10.9 ft - -

Dimensions - Standard Lift

Centerline of Rear Axle to Edge of Counterweight 8.7 ft - -
Centerline of Rear Axle to Hitch 6.3 ft - -
Ground Clearance 456 mm - -
Height - Top of Exhaust Pipe 3764 mm - -
Height - Top of Hood 3064 mm - -
Height - Top of ROPS 3829 mm - -
Hinge Pin Height at Carry 2 ft - -
Hinge Pin Height at Maximum Lift 4554 mm - -
Lift Arm Clearance at Maximum Lift 3881 mm - -
Overall Length - Without Bucket 8155 mm - -
Tread Width 8 ft - -
Wheel Base 3800 mm - -
Width over Tires (Loaded) 10.9 ft - -

Sustainability

Recyclability 98% - -
Add a Similar Product: