|
|
|
|
|
Engine |
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 |
393 HP |
- |
- |
404 HP |
Engine Model |
Cat C13 |
Cat® C18 ™ |
Cat® C15 |
Cat C13 |
Note (1) |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
- |
- |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
- |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
Displacement |
12.5 L |
1105 in³ |
927 in³ |
- |
Gross Torque @ 1,200 rpm – SAE J1995:2014 |
1627 lb/ft |
- |
- |
1636 lb/ft |
Engine Torque @ 1,200 rpm – ISO 14396:2002 |
1612 lb/ft |
- |
- |
1620 lb/ft |
Gross Power @ 1,700 rpm – SAE J1995:2014 |
425 HP |
- |
- |
436 HP |
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
1539 lb/ft |
- |
- |
1515 lb/ft |
Engine Power @ 1,700 rpm – ISO 14396:2002 |
429 HP |
- |
- |
432 HP |
Note (3) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
- |
- |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
Net Power - SAE J1349 |
- |
538 HP |
373 HP |
- |
Engine Power - ISO 14396:2002 |
- |
580 HP |
- |
- |
Gross Power - SAE J1995:2014 |
- |
588 HP |
- |
- |
Rated Speed |
- |
1,700 rpm |
2000 |
- |
Peak Power Speed |
- |
1,500 rpm |
1600 |
- |
Emissions |
- |
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 |
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 |
- |
Bore |
- |
5.7 in |
5.4 in |
- |
Stroke |
- |
7.2 in |
6.75 in |
- |
Peak Torque - 1,200 rpm - SAE J1995 |
- |
2230 ft·lbf |
1778 ft·lbf |
- |
Torque Rise |
- |
58% |
16% |
- |
Engine Power - ISO 14396 |
- |
- |
449 HP |
- |
Gross Power - SAE J1995 |
- |
- |
456 HP |
- |
Weights |
Operating Weight |
66877 lb |
- |
- |
78264 lb |
Note |
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s |
- |
- |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun |
Bucket Capacities |
Bucket Range |
4.0-14.5 m³ 5.25-19 yd³ |
- |
- |
4.8-17.2 m³ 6.25-22.5 yd³ |
Transmission |
Forward - 1 |
4.3 mile/h |
- |
5 mile/h |
3.9 mile/h |
Forward - 2 |
8.3 mile/h |
- |
8 mile/h |
7.4 mile/h |
Forward - 3 |
14.6 mile/h |
- |
- |
13.1 mile/h |
Forward - 4 |
24.5 mile/h |
- |
- |
23.3 mile/h |
Note |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. |
- |
- |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
Reverse - 1 |
4.8 mile/h |
- |
5 mile/h |
4.3 mile/h |
Reverse - 2 |
9.4 mile/h |
- |
8 mile/h |
8.5 mile/h |
Reverse - 3 |
16.7 mile/h |
- |
- |
15 mile/h |
Reverse - 4 |
24.5 mile/h |
- |
- |
24.5 mile/h |
Transmission Type |
- |
Cat switched reluctance electric drive |
Cat planetary power shift |
- |
Forward 1 (virtual) |
- |
4.3 mile/h |
- |
- |
Forward 2 (virtual) |
- |
7 mile/h |
- |
- |
Forward 3 (virtual) |
- |
13.8 mile/h |
- |
- |
Forward 4 (virtual) |
- |
20 mile/h |
- |
- |
Reverse 1 (virtual) |
- |
4.3 mile/h |
- |
- |
Reverse 2 (virtual) |
- |
7 mile/h |
- |
- |
Reverse 3 (virtual) |
- |
17.5 mile/h |
- |
- |
Direct Drive - Forward 1 |
- |
- |
Lock-up disabled |
- |
Direct Drive - Forward 2 |
- |
- |
8 mile/h |
- |
Direct Drive - Forward 3 |
- |
- |
14 mile/h |
- |
Direct Drive - Forward 4 |
- |
- |
24 mile/h |
- |
Direct Drive - Reverse 1 |
- |
- |
Lock-up disabled |
- |
Direct Drive - Reverse 2 |
- |
- |
9 mile/h |
- |
Direct Drive - Reverse 3 |
- |
- |
16 mile/h |
- |
Direct Drive - Reverse 4 |
- |
- |
25.4 mile/h |
- |
Sound |
Note (1) |
** For machines in European Union countries and in countries that adopt the �EU Directives.� |
- |
- |
** For machines in European Union countries and in countries that adopt the �EU Directives.� |
Note (2) |
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� |
- |
- |
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
109 |
- |
- |
109 |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
72 dB(A) |
- |
- |
72 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
112 dB(A) |
- |
- |
112 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
78 |
- |
- |
78 |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
72 dB(A) |
- |
- |
72 dB(A) |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
Operating Specifications |
Breakout Force |
51008 lb |
- |
- |
59060 lbf |
Note (1) |
For a machine configuration as defined under �Weight.� |
- |
- |
For a machine configuration as defined under �Weight.� |
Note (2) |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
- |
- |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Static Tipping Load - Full 40° Turn - No Tire Deflection |
20965 kg |
- |
- |
22418 kg |
Static Tipping Load - Full 40° Turn - With Tire Deflection |
43432 lb |
- |
- |
46526 lb |
Operating Weight |
- |
116362 lb |
116858 lb |
- |
Operating Weight - Standard |
- |
116362 lb |
- |
- |
Operating Weight - High Lift |
- |
119618 lb |
- |
- |
Rated Payload - Standard (Quarry Face) |
- |
12.5 ton (US) |
- |
- |
Rated Payload - Loose Material (Standard) |
- |
16 ton (US) |
- |
- |
Bucket Capacity Range |
- |
4.7-13 m3 (6.2-17 yd3) |
6.4-7.6 m3 (8.3-10 yd3) |
- |
Rated Payload - Quarry Face |
- |
- |
12.5 ton (US) |
- |
Cat Truck Match - High Lift |
- |
- |
772/773/775 |
- |
Service Refill Capacities |
Cooling System |
13.7 gal (US) |
- |
27 gal (US) |
13.7 gal (US) |
Crankcase |
9.8 gal (US) |
- |
- |
9.8 gal (US) |
DEF Tank |
5.5 gal (US) |
- |
- |
5.5 gal (US) |
Differential - Final Drives - Front |
22.2 gal (US) |
49 gal (US) |
49 gal (US) |
24.3 gal (US) |
Differential - Final Drives - Rear |
22.4 gal (US) |
49 gal (US) |
45 gal (US) |
24.3 gal (US) |
Fuel Tank |
112.5 gal (US) |
147 gal (US) |
141 gal (US) |
112.5 gal (US) |
Hydraulic Tank |
40.4 gal (US) |
- |
- |
40.4 gal (US) |
Transmission |
20.3 gal (US) |
16 gal (US) |
20 gal (US) |
20.3 gal (US) |
Cooling System - Jacket Water |
- |
30 gal (US) |
- |
- |
Cooling Systems - Power Train |
- |
8 gal (US) |
- |
- |
Engine Crankcase |
- |
16 gal (US) |
9 gal (US) |
- |
Diesel Exhaust Fluid Tank |
- |
8.7 gal (US) |
5.5 gal (US) |
- |
Hydraulic System - Implement/Steering |
- |
126 gal (US) |
- |
- |
Note |
- |
All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati |
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a |
- |
Hydraulic System |
Implement System - Maximum Operating Pressure |
4975 psi |
- |
- |
4975 psi |
Implement System - Maximum Pump Output at 2,250 rpm |
119 gal/min |
- |
- |
119 gal/min |
Dimensions |
Note |
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
- |
- |
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
Dimensions - High Lift |
Centerline of Rear Axle to Edge of Counterweight |
8.9 ft |
- |
- |
9.4 ft |
Centerline of Rear Axle to Hitch |
6.3 ft |
- |
- |
6.3 ft |
Ground Clearance |
1.5 ft |
- |
- |
1.4 ft |
Height - Top of Exhaust Pipe |
12.5 ft |
- |
- |
12.4 ft |
Height - Top of Hood |
10.1 ft |
- |
- |
10 ft |
Height - Top of ROPS |
12.7 ft |
- |
- |
12.6 ft |
Hinge Pin Height at Carry |
2.2 ft |
- |
- |
2.11 ft |
Hinge Pin Height at Maximum Lift |
15.7 ft |
- |
- |
16.1 ft |
Lift Arm Clearance at Maximum Lift |
13.6 ft |
- |
- |
13.4 ft |
Overall Length - Without Bucket |
27.5 ft |
- |
- |
29.11 ft |
Tread Width |
8 ft |
- |
- |
8.4 ft |
Wheel Base |
12.6 ft |
- |
- |
12.6 ft |
Rack Back at Ground |
40 degrees |
- |
- |
- |
Width over Tires (Loaded) |
10.9 ft |
- |
- |
11.5 ft |
Rack Back - Carry Height |
50 degrees |
- |
- |
- |
Rack Back - Maximum Lift |
61 degrees |
- |
- |
- |
Dimensions - Standard Lift |
Centerline of Rear Axle to Hitch |
6.3 ft |
- |
- |
6.3 ft |
Ground Clearance |
456 mm |
- |
- |
428 mm |
Height - Top of Exhaust Pipe |
3764 mm |
- |
- |
3736 mm |
Height - Top of Hood |
3064 mm |
- |
- |
3036 mm |
Height - Top of ROPS |
3829 mm |
- |
- |
3801 mm |
Hinge Pin Height at Carry |
2.2 ft |
- |
- |
2.7 ft |
Hinge Pin Height at Maximum Lift |
4554 mm |
- |
- |
4741 mm |
Lift Arm Clearance at Maximum Lift |
3881 mm |
- |
- |
3902 mm |
Overall Length - Without Bucket |
8155 mm |
- |
- |
8597 mm |
Tread Width |
8 ft |
- |
- |
8.4 ft |
Wheel Base |
3800 mm |
- |
- |
3800 mm |
Rack Back at Ground |
40 degrees |
- |
- |
- |
Centerline of Rear Axle to Edge of Counterweight |
2661 mm |
- |
- |
8.9 ft |
Width over Tires (Loaded) |
10.9 ft |
- |
- |
11.5 ft |
Rack Back - Carry Height |
50 degrees |
- |
- |
- |
Rack Back - Maximum Lift |
61 degrees |
- |
- |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
EH-Positive Flow Control, Flow Sharing |
EH - Load Sense |
- |
Lift/Tilt System - Pump |
- |
Variable displacement piston |
- |
- |
Maximum Flow at 1,400-1,600 rpm |
- |
153 gal/min |
- |
- |
Relief Valve Setting - Lift/Tilt |
- |
4757 psi |
4598 psi |
- |
Lift Cylinder - Bore |
- |
8.7 in |
- |
- |
Lift Cylinder - Stroke |
- |
41.3 in |
- |
- |
Tilt Cylinder - Bore |
- |
8.7 in |
- |
- |
Tilt Cylinder - Stroke |
- |
27 in |
27 in |
- |
Lift/Tilt System |
- |
- |
2X x 145 cc Variable displacement piston |
- |
Maximum Flow at 2,165 rpm |
- |
- |
159 gal/min |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
- |
190 mm x 1216 mm (7.5 in x 48 in) |
- |
Cylinders, Double Acting - Tilt, Bore and Stroke |
- |
- |
170 mm x 722 mm (6.7 in x 28.4 in) |
- |
Pilot System |
- |
- |
Variable displacement piston |
- |
Hydraulic Cycle Times |
Rack Back |
- |
4.5 s |
3.8 s |
- |
Raise |
- |
8 s |
7.5 s |
- |
Dump |
- |
2.2 s |
3 s |
- |
Lower Float Down |
- |
3.5 s |
4.6 s |
- |
Total Hydraulic Cycle Time |
- |
18.2 s |
- |
- |
Total Hydraulic Cycle Time - Empty Bucket |
- |
- |
18.9 s |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
Pilot, load sensing |
Pilot, load sensing |
- |
Steering System - Pump |
- |
Piston, variable displacement |
Piston, variable displacement |
- |
Maximum Flow at 1,400-1,600 rpm |
- |
71.3 gal/min |
- |
- |
Steering Cut Off Pressure |
- |
4351 psi |
- |
- |
Total Steering Angle |
- |
86° |
70° |
- |
Steering Cycle Times - High Idle |
- |
3.4 s |
3 s |
- |
Steering Cycle Times - Low Idle |
- |
5.6 s |
5.2 s |
- |
Maximum Flow |
- |
- |
52 gal (US) |
- |
Relief Valve Setting - Steering |
- |
- |
4000 psi |
- |
Axles |
Front |
- |
Fixed |
Fixed |
- |
Rear |
- |
Trunnion |
Trunnion |
- |
Oscillation Angle |
- |
13° |
+/-12.5° |
- |
Brakes |
Brakes |
- |
ISO 3450:2011 |
ISO 3450:2011 |
- |
Operator's Cab |
ROPS/FOPS |
- |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
- |
Sound Performance - Tier 4 Final / Stage V - Standard |
Operator Sound Pressure Level (ISO 6396:2008) |
- |
72 dB(A) |
- |
- |
Machine Sound Power Level (ISO 6395:2008) |
- |
109 dB(A) |
- |
- |
Sound Performance - Tier 3 / Stage III - Standard |
Operator Sound Pressure Level (ISO 6396:2008) |
- |
72 dB(A) |
- |
- |
Machine Sound Power Level (ISO 6395:2008) |
- |
110 dB(A) |
- |
- |
Dimensions (Approximate) - Standard Lift |
Ground to Top of ROPS |
- |
13.8 ft |
- |
- |
Ground to Top of Exhaust Stacks |
- |
14.8 ft |
- |
- |
Ground to Top of Hood |
- |
10.9 ft |
- |
- |
Ground to Bumper Clearance |
- |
3.1 ft |
- |
- |
Rear Axle - Centerline to Bumper |
- |
10.5 ft |
- |
- |
Front Axle Centerline to Bucket Tip |
- |
14 ft |
- |
- |
Wheel Base |
- |
14.9 ft |
- |
- |
Maximum Overall Length |
- |
39.3 ft |
- |
- |
Ground to Lower Hitch Clearance |
- |
1.9 ft |
- |
- |
Ground to Center of Axles |
- |
3.2 ft |
- |
- |
Clearance at Maximum Lift |
- |
11.9 ft |
- |
- |
B-Pin Height - Maximum Lift |
- |
18 ft |
- |
- |
Maximum Overall Height - Bucket Raised |
- |
24.5 ft |
- |
- |
Reach - Maximum Lift |
- |
6.5 ft |
- |
- |
Note |
- |
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. |
- |
- |
Dimensions (Approximate) - High Lift |
Ground to Top of ROPS |
- |
13.8 ft |
13.5 ft |
- |
Ground to Top of Exhaust Stacks |
- |
14.8 ft |
13.3 ft |
- |
Ground to Top of Hood |
- |
10.9 ft |
10.7 ft |
- |
Ground to Bumper Clearance |
- |
3.1 ft |
- |
- |
Rear Axle - Centerline to Bumper |
- |
10.5 ft |
10.3 ft |
- |
Front Axle Centerline to Bucket Tip |
- |
15.3 ft |
15.7 ft |
- |
Wheel Base |
- |
14.9 ft |
12.5 ft |
- |
Maximum Overall Length |
- |
40.7 ft |
39.5 ft |
- |
Ground to Lower Hitch Clearance |
- |
1.9 ft |
1.5 ft |
- |
Ground to Center of Axles |
- |
3.2 ft |
- |
- |
Clearance at Maximum Lift |
- |
13.3 ft |
12 ft |
- |
B-Pin Height - Maximum Lift |
- |
19.3 ft |
18.7 ft |
- |
Maximum Overall Height - Bucket Raised |
- |
25.8 ft |
25 ft |
- |
Reach - Maximum Lift |
- |
6.8 ft |
7.7 ft |
- |
Note |
- |
Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. |
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. |
- |
Dimensions - Millyard Linkage |
Ground to Top of ROPS |
- |
13.8 ft |
- |
- |
Ground to Top of Exhaust Stacks |
- |
13.8 ft |
- |
- |
Ground to Top of Hood |
- |
10.9 ft |
- |
- |
Ground to Bumper Clearance |
- |
3.1 ft |
- |
- |
Rear Axle - Centerline to Bumper |
- |
10.5 ft |
- |
- |
Front Axle Centerline to Fork Tip |
- |
16.5 ft |
- |
- |
Wheel Base |
- |
14.9 ft |
- |
- |
Maximum Overall Length |
- |
41.9 ft |
- |
- |
Ground to Lower Hitch Clearance |
- |
1.9 ft |
- |
- |
Ground to Center of Front Axle |
- |
3.2 ft |
- |
- |
Fork Height with Level Arms |
- |
8.1 ft |
- |
- |
Fork Top Clamp Opening |
- |
13.1 ft |
- |
- |
Fork Height at Maximum Lift |
- |
17.2 ft |
- |
- |
Hinge Pin Height at Maximum Lift |
- |
16.1 ft |
- |
- |
Dump Angle at Maximum Lift |
- |
-39.4 ° |
- |
- |
Buckets |
Bucket Capacities |
- |
4.7-13 m3 (6.2-17 yd3) |
6.4-7.6 m3 (8.3-10 yd3) |
- |
Sustainability |
Recyclability |
- |
96% |
96% |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
- |
110 dB(A) |
- |
Note (1) |
- |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
- |
Note (2) |
- |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
- |