CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    980
    View Product
    988 XE Wheel Loader
    View Product Remove
    992 Wheel Loader
    View Product Remove
    988 Wheel Loader
    View Product Remove

    Engine
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 393 HP - - -
    Engine Model Cat C13 Cat® C18 ™ Cat® C32B Cat® C18 ™
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. - - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - - -
    Displacement 12.5 L 1105 in³ 1963.5 in³ 1105 in³
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1627 lb/ft - - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1612 lb/ft - - -
    Gross Power @ 1,700 rpm – SAE J1995:2014 425 HP - - -
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 1539 lb/ft - - -
    Engine Power @ 1,700 rpm – ISO 14396:2002 429 HP - - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - - -
    Net Power - SAE J1349 - 538 HP - -
    Engine Power - ISO 14396:2002 - 580 HP - 580 HP
    Gross Power - SAE J1995:2014 - 588 HP - 588 HP
    Rated Speed - 1,700 rpm 1750 rpm 1700/min
    Peak Power Speed - 1,500 rpm - 1500/rpm
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
    Bore - 5.7 in 5.7 in 5.7 in
    Stroke - 7.2 in 6.4 in 7.2 in
    Peak Torque - 1,200 rpm - SAE J1995 - 2230 ft·lbf - -
    Torque Rise - 58% - 58 %
    Net Power - - 814 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - - 900 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - - 937 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - - 907 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - - 944 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - - 884 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - - 921 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - - 893 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - - 931 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - - 823 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - - 823 HP -
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - - 3514 ft·lbf -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - - 3555 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - - 3537 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - - 3570 ft·lbf -
    Net Power - SAE J1349:2011 - - - 538 HP
    Peak Torque - 1,200 rpm - - - 2230 lb/ft

    Weights
    Operating Weight 66877 lb - - -
    Note Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s - - -

    Bucket Capacities
    Bucket Range 4.0-14.5 m³ 5.25-19 yd³ - - -

    Transmission
    Forward - 1 4.3 mile/h - 4.3 mile/h 4 mile/h
    Forward - 2 8.3 mile/h - 7.4 mile/h 7.2 mile/h
    Forward - 3 14.6 mile/h - 12.7 mile/h 12.7 mile/h
    Forward - 4 24.5 mile/h - - 21.6 mile/h
    Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. - - -
    Reverse - 1 4.8 mile/h - 4.7 mile/h 4.7 mile/h
    Reverse - 2 9.4 mile/h - 8.1 mile/h 8.3 mile/h
    Reverse - 3 16.7 mile/h - 13.9 mile/h 14.4 mile/h
    Reverse - 4 24.5 mile/h - - -
    Transmission Type - Cat switched reluctance electric drive Cat Planetary Powershift Cat planetary powershift
    Forward 1 (virtual) - 4.3 mile/h - -
    Forward 2 (virtual) - 7 mile/h - -
    Forward 3 (virtual) - 13.8 mile/h - -
    Forward 4 (virtual) - 20 mile/h - -
    Reverse 1 (virtual) - 4.3 mile/h - -
    Reverse 2 (virtual) - 7 mile/h - -
    Reverse 3 (virtual) - 17.5 mile/h - -
    Direct Drive - Forward 1 - - Disabled Lock-up disabled
    Direct Drive - Forward 2 - - 8 mile/h 7.8 mile/h
    Direct Drive - Forward 3 - - 14 mile/h 13.9 mile/h
    Direct Drive - Reverse 1 - - 5 mile/h 5 mile/h
    Direct Drive - Reverse 2 - - 8.8 mile/h 8.9 mile/h
    Direct Drive - Reverse 3 - - 15.3 mile/h 15.8 mile/h
    Direct Drive - Forward 4 - - - 24.4 mile/h

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the �EU Directives.� - - -
    Note (2) ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� - - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 109 - - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 112 dB(A) - - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 78 - - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 72 dB(A) - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operating Specifications
    Breakout Force 51008 lb - - -
    Note (1) For a machine configuration as defined under �Weight.� - - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 20965 kg - - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 43432 lb - - -
    Operating Weight - 116362 lb 233430 lb 112574 lb
    Operating Weight - Standard - 116362 lb - -
    Operating Weight - High Lift - 119618 lb - -
    Rated Payload - Standard (Quarry Face) - 12.5 ton (US) - -
    Rated Payload - Loose Material (Standard) - 16 ton (US) - -
    Bucket Capacity Range - 4.7-13 m3 (6.2-17 yd3) 11.5-24.5 m³ (15-32 yd³) 4.7-13 m3 (6.2-17 yd3)
    Rated Payload - Standard - - 25.5 ton (US) -
    Rated Payload - Standard (Material Handler) - - 30 ton (US) -
    Rated Payload - High Lift - - 22.5 ton (US) -
    Rated Payload - High Lift (Material Handler) - - 27 ton (US) -
    Cat Truck Match - Standard - - 775/777 770～772
    Cat Truck Match - High Lift - - 785 773～775
    Rated Payload - Quarry Face - - - 12.5 t
    Rated Payload - Loose Material - - - 16 t

    Service Refill Capacities
    Cooling System 13.7 gal (US) - - 31.7 gal (US)
    Crankcase 9.8 gal (US) - 31.7 gal (US) 15.9 gal (US)
    DEF Tank 5.5 gal (US) - - -
    Differential - Final Drives - Front 22.2 gal (US) 49 gal (US) 96.4 gal (US) 49.1 gal (US)
    Differential - Final Drives - Rear 22.4 gal (US) 49 gal (US) 96.4 gal (US) 49.1 gal (US)
    Fuel Tank 112.5 gal (US) 147 gal (US) 385.7 gal (US) 188 gal (US)
    Hydraulic Tank 40.4 gal (US) - - -
    Transmission 20.3 gal (US) 16 gal (US) 51.5 gal (US) 31.7 gal (US)
    Cooling System - Jacket Water - 30 gal (US) - -
    Cooling Systems - Power Train - 8 gal (US) - -
    Engine Crankcase - 16 gal (US) - -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) - 8.7 gal (US)
    Hydraulic System - Implement/Steering - 126 gal (US) - -
    Note - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati - -
    Cooling Systems - - 59.4 gal (US) -
    Hydraulic System Factory Fill (Implement) - - 104.1 gal (US) -
    Hydraulic Tank - Implement - - 60.2 gal (US) -
    Hydraulic Factory Fill (Steering) - - 32.5 gal (US) -
    Hydraulic Tank (Steering Tank Only) - - 26.3 gal (US) -
    Coolant (Validated by Test Cell Fill Quantities) - - - 33 gal (US)
    Transmission - Validated by Test Cell Fill Quantities - - - 29 gal (US)
    Hydraulic System Factory Fill - - - 125.5 gal (US)
    Hydraulic System - Tank Only - - - 63.4 gal (US)

    Hydraulic System
    Implement System - Maximum Operating Pressure 4975 psi - - -
    Implement System - Maximum Pump Output at 2,250 rpm 119 gal/min - - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. - - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.9 ft - - -
    Centerline of Rear Axle to Hitch 6.3 ft - - -
    Ground Clearance 1.5 ft - - -
    Height - Top of Exhaust Pipe 12.5 ft - - -
    Height - Top of Hood 10.1 ft - - -
    Height - Top of ROPS 12.7 ft - - -
    Hinge Pin Height at Carry 2.2 ft - - -
    Hinge Pin Height at Maximum Lift 15.7 ft - - -
    Lift Arm Clearance at Maximum Lift 13.6 ft - - -
    Overall Length - Without Bucket 27.5 ft - - -
    Tread Width 8 ft - - -
    Wheel Base 12.6 ft - - -
    Rack Back at Ground 40 degrees - - -
    Width over Tires (Loaded) 10.9 ft - - -
    Rack Back - Carry Height 50 degrees - - -
    Rack Back - Maximum Lift 61 degrees - - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch 6.3 ft - - -
    Ground Clearance 456 mm - - -
    Height - Top of Exhaust Pipe 3764 mm - - -
    Height - Top of Hood 3064 mm - - -
    Height - Top of ROPS 3829 mm - - -
    Hinge Pin Height at Carry 2.2 ft - - -
    Hinge Pin Height at Maximum Lift 4554 mm - - -
    Lift Arm Clearance at Maximum Lift 3881 mm - - -
    Overall Length - Without Bucket 8155 mm - - -
    Tread Width 8 ft - - -
    Wheel Base 3800 mm - - -
    Rack Back at Ground 40 degrees - - -
    Centerline of Rear Axle to Edge of Counterweight 2661 mm - - -
    Width over Tires (Loaded) 10.9 ft - - -
    Rack Back - Carry Height 50 degrees - - -
    Rack Back - Maximum Lift 61 degrees - - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH-Positive Flow Control, Flow Sharing Positive Flow Control EH- Positive Flow Control, Flow Sharing
    Lift/Tilt System - Pump - Variable displacement piston Variable Displacement Piston -
    Maximum Flow at 1,400-1,600 rpm - 153 gal/min - -
    Relief Valve Setting - Lift/Tilt - 4757 psi 5000 psi 4757 psi
    Lift Cylinder - Bore - 8.7 in 9.3 in -
    Lift Cylinder - Stroke - 41.3 in 63.5 in -
    Tilt Cylinder - Bore - 8.7 in 11.5 in -
    Tilt Cylinder - Stroke - 27 in 41.5 in -
    Maximum Flow at 2,165 rpm - - 250 gal/min -
    Lift/Tilt System - - - Variable displacement piston
    Maximum Flow at 1,400-1,860 rpm - - - 153 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - - 210 mm × 1050 mm (8.7 in × 41.3 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - - 269 mm × 685 mm (8.7 in × 27 in)
    Pilot System - - - Variable displacement piston
    Relief Valve Setting - Main - - - 551 psi

    Hydraulic Cycle Times
    Rack Back - 4.5 s 2.3 s -
    Raise - 8 s 9 s -
    Dump - 2.2 s 2.6 s -
    Lower Float Down - 3.5 s - -
    Total Hydraulic Cycle Time - 18.2 s 17.1 s -
    Rack Back - High Lift - - 2.3 s -
    Raise - High Lift - - 9 s -
    Dump - High Lift - - 2.6 s -
    Float Down - - 3.2 s -
    Float Down - High Lift - - 3.2 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, Load Sensing Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Piston, Variable Displacement Piston, variable displacement
    Maximum Flow at 1,400-1,600 rpm - 71.3 gal/min - -
    Steering Cut Off Pressure - 4351 psi 4500 psi -
    Total Steering Angle - 86° 80° 86 °
    Steering Cycle Times - High Idle - 3.4 s 3.1 s 3.4 s
    Steering Cycle Times - Low Idle - 5.6 s 4.9 s 5.6 s
    Maximum Flow at 1,400-1,850 rpm - - 70 gal/min -
    Maximum Flow - - - 71.3 gal/min
    Relief Valve Setting - Steering - - - 4351 psi

    Axles
    Front - Fixed Fixed Fixed
    Rear - Trunnion Trunnion Trunnion
    Oscillation Angle - 13° ±9° 13 °

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - 109 dB(A) - 111 dB(A)

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - 110 dB(A) - 112 dB(A)

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - 13.8 ft - -
    Ground to Top of Exhaust Stacks - 14.8 ft - -
    Ground to Top of Hood - 10.9 ft - -
    Ground to Bumper Clearance - 3.1 ft - -
    Rear Axle - Centerline to Bumper - 10.5 ft - -
    Front Axle Centerline to Bucket Tip - 14 ft - -
    Wheel Base - 14.9 ft - -
    Maximum Overall Length - 39.3 ft - -
    Ground to Lower Hitch Clearance - 1.9 ft - -
    Ground to Center of Axles - 3.2 ft - -
    Clearance at Maximum Lift - 11.9 ft - -
    B-Pin Height - Maximum Lift - 18 ft - -
    Maximum Overall Height - Bucket Raised - 24.5 ft - -
    Reach - Maximum Lift - 6.5 ft - -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. - -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.8 ft - -
    Ground to Top of Exhaust Stacks - 14.8 ft - -
    Ground to Top of Hood - 10.9 ft - -
    Ground to Bumper Clearance - 3.1 ft - -
    Rear Axle - Centerline to Bumper - 10.5 ft - -
    Front Axle Centerline to Bucket Tip - 15.3 ft - -
    Wheel Base - 14.9 ft - -
    Maximum Overall Length - 40.7 ft - -
    Ground to Lower Hitch Clearance - 1.9 ft - -
    Ground to Center of Axles - 3.2 ft - -
    Clearance at Maximum Lift - 13.3 ft - -
    B-Pin Height - Maximum Lift - 19.3 ft - -
    Maximum Overall Height - Bucket Raised - 25.8 ft - -
    Reach - Maximum Lift - 6.8 ft - -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. - -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - 13.8 ft - -
    Ground to Top of Exhaust Stacks - 13.8 ft - -
    Ground to Top of Hood - 10.9 ft - -
    Ground to Bumper Clearance - 3.1 ft - -
    Rear Axle - Centerline to Bumper - 10.5 ft - -
    Front Axle Centerline to Fork Tip - 16.5 ft - -
    Wheel Base - 14.9 ft - -
    Maximum Overall Length - 41.9 ft - -
    Ground to Lower Hitch Clearance - 1.9 ft - -
    Ground to Center of Front Axle - 3.2 ft - -
    Fork Height with Level Arms - 8.1 ft - -
    Fork Top Clamp Opening - 13.1 ft - -
    Fork Height at Maximum Lift - 17.2 ft - -
    Hinge Pin Height at Maximum Lift - 16.1 ft - -
    Dump Angle at Maximum Lift - -39.4 ° - -

    Buckets
    Bucket Capacities - 4.7-13 m3 (6.2-17 yd3) 11.5-24.5 m³ (15-32 yd³) 4.7-13 m3 (6.2-17 yd3)

    Sustainability
    Recyclability - 96% - -

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F -
    Ambient Capability, Hydraulically Driven Demand Fan - High - - 131 °F -

    Sound Performance - Standard
    Note - - Machine Sound Level (ISO 6396:2008) - 116 dB(A) -

    Sound Performance - Suppression
    Note - - Machine Sound Level (ISO 6396:2008) - 113 dB(A) -

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - - 17 ft -
    Ground to Top of ROPS - - 18.3 ft -
    Ground to Top of Hood - - 13.1 ft -
    Ground to Center of Front Axle - - 4.3 ft -
    Ground to Bumper Clearance - - 3.8 ft -
    Ground to Lower Hitch Clearance - - 2.2 ft -
    Reach - Maximum Lift - - 8.2 ft -
    Clearance at Maximum Lift - - 15.2 ft -
    B-Pin Height - Maximum Lift - - 22.8 ft -
    Maximum Overall Height - Bucket Raised - - 30.8 ft -
    Rear Axle - Centerline to Bumper - - 13.5 ft -
    Tread Width - - 10.83 ft -
    Rack Back Angle - Maximum Lift - - 56.9 degrees -
    Dump Angle at Maximum Lift - - -49.5 degrees -
    Rack Back Angle - Ground Level - - 40.2 degrees -
    Width - Over Tires - With Bulge - - 14.74 ft -
    Rack Back Angle - Carry - - 48.9 degrees -
    Wheel Base - - 19.3 ft -
    Maximum Overall Length - - 50.8 ft -
    Front Axle Centerline to Bucket Tip - - 18 ft -

    Dimensions - High Lift - Approximate
    Tread Width - - 10.83 ft -
    Rack Back Angle - Ground Level - - 42.5 degrees -
    Dump Angle at Maximum Lift - - -48.1 degrees -
    Rack Back Angle - Maximum Lift - - 56.2 degrees -
    Width - Over Tires - With Bulge - - 14.75 ft -
    Rack Back Angle - Carry - - 51.6 degrees -
    Ground to Top of Exhaust Stacks - - 17 ft -
    Ground to Top of ROPS - - 18.3 ft -
    Ground to Top of Hood - - 13.1 ft -
    Ground to Center of Front Axle - - 4.3 ft -
    Ground to Bumper Clearance - - 3.8 ft -
    Ground to Lower Hitch Clearance - - 2.2 ft -
    Reach - Maximum Lift - - 7.6 ft -
    Clearance at Maximum Lift - - 17.2 ft -
    B-Pin Height - Maximum Lift - - 24.5 ft -
    Maximum Overall Height - Bucket Raised - - 32 ft -
    Rear Axle - Centerline to Bumper - - 13.5 ft -
    Wheel Base - - 19.3 ft -
    Maximum Overall Length - - 51.6 ft -
    Front Axle Centerline to Bucket Tip - - 18.8 ft -

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - - - 4.5 s
    Raise - - - 8 s
    Dump - - - 2.2 s
    Lower Float Down - - - 3.5 s
    Total Hydraulic Cycle Time - Empty Bucket - - - 18.2 s

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - - 13.8 ft
    Ground to Top of Exhaust Stacks - - - 14.8 ft
    Ground to Top of Hood - - - 10.9 ft
    Rear Axle - Centerline to Bumper - - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - - 14 ft
    Wheel Base - - - 14.9 ft
    Maximum Overall Length - - - 39.3 ft
    Ground to Lower Hitch Clearance - - - 1.9 ft
    Clearance at Maximum Lift - - - 11.9 ft
    B-Pin Height - Maximum Lift - - - 18 ft
    Maximum Overall Height - Bucket Raised - - - 24.5 ft
    Reach - Maximum Lift - - - 6.5 ft

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - - 13.8 ft
    Ground to Top of Exhaust Stacks - - - 14.8 ft
    Ground to Top of Hood - - - 10.9 ft
    Rear Axle - Centerline to Bumper - - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - - 15.3 ft
    Wheel Base - - - 14.9 ft
    Maximum Overall Length - - - 40.7 ft
    Ground to Lower Hitch Clearance - - - 1.9 ft
    Clearance at Maximum Lift - - - 13.3 ft
    B-Pin Height - Maximum Lift - - - 19.3 ft
    Maximum Overall Height - Bucket Raised - - - 25.8 ft
    Reach - Maximum Lift - - - 6.8 ft
    Add a Similar Product: