|
|
|
|
|
Engine |
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 |
393 HP |
- |
- |
- |
Engine Model |
Cat C13 |
Cat® C32B |
C27 Cat® |
Cat® C15 |
Note (1) |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
- |
- |
- |
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
- |
- |
- |
Displacement |
12.5 L |
1963.5 in³ |
1649.5 in³ |
927 in³ |
Gross Torque @ 1,200 rpm – SAE J1995:2014 |
1627 lb/ft |
- |
- |
- |
Engine Torque @ 1,200 rpm – ISO 14396:2002 |
1612 lb/ft |
- |
- |
- |
Gross Power @ 1,700 rpm – SAE J1995:2014 |
425 HP |
- |
- |
- |
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
1539 lb/ft |
- |
- |
- |
Engine Power @ 1,700 rpm – ISO 14396:2002 |
429 HP |
- |
- |
- |
Note (3) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
- |
- |
- |
Net Power |
- |
814 HP |
- |
- |
Emissions |
- |
U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent |
U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent |
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 |
Rated Speed |
- |
1750 rpm |
1,800/min |
2000 |
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard |
- |
900 HP |
- |
- |
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient |
- |
937 HP |
- |
- |
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard |
- |
907 HP |
- |
- |
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient |
- |
944 HP |
- |
- |
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard |
- |
884 HP |
- |
- |
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient |
- |
921 HP |
- |
- |
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard |
- |
893 HP |
- |
- |
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient |
- |
931 HP |
- |
- |
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard |
- |
814 HP |
- |
- |
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient |
- |
814 HP |
- |
- |
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard |
- |
823 HP |
- |
- |
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient |
- |
823 HP |
- |
- |
Bore |
- |
5.7 in |
5.4 in |
5.4 in |
Stroke |
- |
6.4 in |
6 in |
6.75 in |
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm |
- |
3514 ft·lbf |
- |
- |
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm |
- |
3555 ft·lbf |
- |
- |
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm |
- |
3537 ft·lbf |
- |
- |
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm |
- |
3570 ft·lbf |
- |
- |
Engine Power - ISO 14396 |
- |
- |
752 HP |
449 HP |
Gross Power - SAE J1995 |
- |
- |
766 HP |
456 HP |
Net Power - SAE J1349 - Standard Ambient |
- |
- |
699 HP |
- |
Net Power - SAE J1349 - High Ambient |
- |
- |
648 HP |
- |
Peak Torque - 1,200 rpm |
- |
- |
2624 lb/ft |
- |
Torque Rise |
- |
- |
18 % |
16% |
Peak Power Speed |
- |
- |
- |
1600 |
Net Power - SAE J1349 |
- |
- |
- |
373 HP |
Peak Torque - 1,200 rpm - SAE J1995 |
- |
- |
- |
1778 ft·lbf |
Weights |
Operating Weight |
66877 lb |
- |
- |
- |
Note |
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s |
- |
- |
- |
Bucket Capacities |
Bucket Range |
4.0-14.5 m³ 5.25-19 yd³ |
- |
- |
- |
Transmission |
Forward - 1 |
4.3 mile/h |
4.3 mile/h |
4.5 mile/h |
5 mile/h |
Forward - 2 |
8.3 mile/h |
7.4 mile/h |
8.3 mile/h |
8 mile/h |
Forward - 3 |
14.6 mile/h |
12.7 mile/h |
14.2 mile/h |
- |
Forward - 4 |
24.5 mile/h |
- |
- |
- |
Note |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. |
- |
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires. |
- |
Reverse - 1 |
4.8 mile/h |
4.7 mile/h |
4.9 mile/h |
5 mile/h |
Reverse - 2 |
9.4 mile/h |
8.1 mile/h |
9.1 mile/h |
8 mile/h |
Reverse - 3 |
16.7 mile/h |
13.9 mile/h |
15.5 mile/h |
- |
Reverse - 4 |
24.5 mile/h |
- |
- |
- |
Transmission Type |
- |
Cat Planetary Powershift |
Cat planetary power shift |
Cat planetary power shift |
Direct Drive - Forward 1 |
- |
Disabled |
Lock-up disabled |
Lock-up disabled |
Direct Drive - Forward 2 |
- |
8 mile/h |
8.5 mile/h |
8 mile/h |
Direct Drive - Forward 3 |
- |
14 mile/h |
15.2 mile/h |
14 mile/h |
Direct Drive - Reverse 1 |
- |
5 mile/h |
5.4 mile/h |
Lock-up disabled |
Direct Drive - Reverse 2 |
- |
8.8 mile/h |
9.6 mile/h |
9 mile/h |
Direct Drive - Reverse 3 |
- |
15.3 mile/h |
16.4 mile/h |
16 mile/h |
Direct Drive - Forward 4 |
- |
- |
- |
24 mile/h |
Direct Drive - Reverse 4 |
- |
- |
- |
25.4 mile/h |
Sound |
Note (1) |
** For machines in European Union countries and in countries that adopt the �EU Directives.� |
- |
- |
- |
Note (2) |
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� |
- |
- |
- |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
109 |
- |
- |
- |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
72 dB(A) |
- |
- |
- |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
112 dB(A) |
- |
- |
- |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
78 |
- |
- |
- |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
72 dB(A) |
- |
- |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Operating Specifications |
Breakout Force |
51008 lb |
- |
- |
- |
Note (1) |
For a machine configuration as defined under �Weight.� |
- |
- |
- |
Note (2) |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
- |
- |
- |
Static Tipping Load - Full 40° Turn - No Tire Deflection |
20965 kg |
- |
- |
- |
Static Tipping Load - Full 40° Turn - With Tire Deflection |
43432 lb |
- |
- |
- |
Operating Weight |
- |
233430 lb |
178517 lb |
116858 lb |
Rated Payload - Standard |
- |
25.5 ton (US) |
17.5 ton (US) |
- |
Rated Payload - Standard (Material Handler) |
- |
30 ton (US) |
- |
- |
Rated Payload - High Lift |
- |
22.5 ton (US) |
17.5 ton (US) |
- |
Rated Payload - High Lift (Material Handler) |
- |
27 ton (US) |
- |
- |
Bucket Capacity Range |
- |
11.5-24.5 m³ (15-32 yd³) |
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
6.4-7.6 m3 (8.3-10 yd3) |
Cat Truck Match - Standard |
- |
775/777 |
773-775 |
- |
Cat Truck Match - High Lift |
- |
785 |
775-777 |
772/773/775 |
Rated Payload - Quarry Face |
- |
- |
- |
12.5 ton (US) |
Service Refill Capacities |
Cooling System |
13.7 gal (US) |
- |
54.9 gal (US) |
27 gal (US) |
Crankcase |
9.8 gal (US) |
31.7 gal (US) |
- |
- |
DEF Tank |
5.5 gal (US) |
- |
- |
- |
Differential - Final Drives - Front |
22.2 gal (US) |
96.4 gal (US) |
71.6 gal (US) |
49 gal (US) |
Differential - Final Drives - Rear |
22.4 gal (US) |
96.4 gal (US) |
68.9 gal (US) |
45 gal (US) |
Fuel Tank |
112.5 gal (US) |
385.7 gal (US) |
294.3 gal (US) |
141 gal (US) |
Hydraulic Tank |
40.4 gal (US) |
- |
- |
- |
Transmission |
20.3 gal (US) |
51.5 gal (US) |
29.1 gal (US) |
20 gal (US) |
Cooling Systems |
- |
59.4 gal (US) |
- |
- |
Hydraulic System Factory Fill (Implement) |
- |
104.1 gal (US) |
- |
- |
Hydraulic Tank - Implement |
- |
60.2 gal (US) |
- |
- |
Hydraulic Factory Fill (Steering) |
- |
32.5 gal (US) |
- |
- |
Hydraulic Tank (Steering Tank Only) |
- |
26.3 gal (US) |
- |
- |
Engine Crankcase |
- |
- |
20 gal (US) |
9 gal (US) |
Hydraulic System Factory Fill |
- |
- |
210 gal (US) |
- |
Hydraulic Tank - Implement and Hydraulic Fan |
- |
- |
68.9 gal (US) |
- |
Hydraulic Tank - Steering and Braking |
- |
- |
34.9 gal (US) |
- |
Note |
- |
- |
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l |
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a |
Diesel Exhaust Fluid Tank |
- |
- |
- |
5.5 gal (US) |
Hydraulic System |
Implement System - Maximum Operating Pressure |
4975 psi |
- |
- |
- |
Implement System - Maximum Pump Output at 2,250 rpm |
119 gal/min |
- |
- |
- |
Dimensions |
Note |
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
- |
- |
- |
Dimensions - High Lift |
Centerline of Rear Axle to Edge of Counterweight |
8.9 ft |
- |
- |
- |
Centerline of Rear Axle to Hitch |
6.3 ft |
- |
- |
- |
Ground Clearance |
1.5 ft |
- |
- |
- |
Height - Top of Exhaust Pipe |
12.5 ft |
- |
- |
- |
Height - Top of Hood |
10.1 ft |
- |
- |
- |
Height - Top of ROPS |
12.7 ft |
- |
- |
- |
Hinge Pin Height at Carry |
2.2 ft |
- |
- |
- |
Hinge Pin Height at Maximum Lift |
15.7 ft |
- |
- |
- |
Lift Arm Clearance at Maximum Lift |
13.6 ft |
- |
- |
- |
Overall Length - Without Bucket |
27.5 ft |
- |
- |
- |
Tread Width |
8 ft |
- |
- |
- |
Wheel Base |
12.6 ft |
- |
- |
- |
Rack Back at Ground |
40 degrees |
- |
- |
- |
Width over Tires (Loaded) |
10.9 ft |
- |
- |
- |
Rack Back - Carry Height |
50 degrees |
- |
- |
- |
Rack Back - Maximum Lift |
61 degrees |
- |
- |
- |
Dimensions - Standard Lift |
Centerline of Rear Axle to Hitch |
6.3 ft |
- |
- |
- |
Ground Clearance |
456 mm |
- |
- |
- |
Height - Top of Exhaust Pipe |
3764 mm |
- |
- |
- |
Height - Top of Hood |
3064 mm |
- |
- |
- |
Height - Top of ROPS |
3829 mm |
- |
- |
- |
Hinge Pin Height at Carry |
2.2 ft |
- |
- |
- |
Hinge Pin Height at Maximum Lift |
4554 mm |
- |
- |
- |
Lift Arm Clearance at Maximum Lift |
3881 mm |
- |
- |
- |
Overall Length - Without Bucket |
8155 mm |
- |
- |
- |
Tread Width |
8 ft |
- |
- |
- |
Wheel Base |
3800 mm |
- |
- |
- |
Rack Back at Ground |
40 degrees |
- |
- |
- |
Centerline of Rear Axle to Edge of Counterweight |
2661 mm |
- |
- |
- |
Width over Tires (Loaded) |
10.9 ft |
- |
- |
- |
Rack Back - Carry Height |
50 degrees |
- |
- |
- |
Rack Back - Maximum Lift |
61 degrees |
- |
- |
- |
Buckets |
Bucket Capacities |
- |
11.5-24.5 m³ (15-32 yd³) |
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³) |
6.4-7.6 m3 (8.3-10 yd3) |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
Positive Flow Control |
Positive flow control |
EH - Load Sense |
Lift/Tilt System - Pump |
- |
Variable Displacement Piston |
- |
- |
Maximum Flow at 2,165 rpm |
- |
250 gal/min |
- |
159 gal/min |
Relief Valve Setting - Lift/Tilt |
- |
5000 psi |
4786 psi |
4598 psi |
Lift Cylinder - Bore |
- |
9.3 in |
- |
- |
Lift Cylinder - Stroke |
- |
63.5 in |
- |
- |
Tilt Cylinder - Bore |
- |
11.5 in |
- |
- |
Tilt Cylinder - Stroke |
- |
41.5 in |
- |
27 in |
Lift/Tilt System |
- |
- |
Variable displacement piston |
2X x 145 cc Variable displacement piston |
Maximum Flow at 1,800 rpm (1) |
- |
- |
240 gal/min |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
- |
235 mm × 1287 mm (9.3 in × 50.7 in) |
190 mm x 1216 mm (7.5 in x 48 in) |
Cylinders, Double Acting - Tilt, Bore and Stroke |
- |
- |
292.1 mm × 820 mm (11.5 in × 32.3 in) |
170 mm x 722 mm (6.7 in x 28.4 in) |
Pilot System |
- |
- |
Open loop and pressure reducing |
Variable displacement piston |
Relief Valve Setting - Main |
- |
- |
507 psi |
- |
Hydraulic Cycle Times |
Rack Back |
- |
2.3 s |
4.3 s |
3.8 s |
Rack Back - High Lift |
- |
2.3 s |
- |
- |
Raise |
- |
9 s |
8.2 s |
7.5 s |
Raise - High Lift |
- |
9 s |
- |
- |
Dump |
- |
2.6 s |
2.9 s |
3 s |
Dump - High Lift |
- |
2.6 s |
- |
- |
Float Down |
- |
3.2 s |
- |
- |
Float Down - High Lift |
- |
3.2 s |
- |
- |
Total Hydraulic Cycle Time |
- |
17.1 s |
- |
- |
Lower |
- |
- |
3.7 s |
- |
Lower Float Down |
- |
- |
3.6 s |
4.6 s |
Total Hydraulic Cycle Time - Empty Bucket |
- |
- |
13.8 s |
18.9 s |
Axles |
Front |
- |
Fixed |
Fixed |
Fixed |
Rear |
- |
Trunnion |
Trunnion |
Trunnion |
Oscillation Angle |
- |
±9° |
8.5° |
+/-12.5° |
Brakes |
Brakes |
- |
ISO 3450:2011 |
ISO 3450: 2011 |
ISO 3450:2011 |
Hydraulic System - Steering |
Steering System - Circuit |
- |
Pilot, Load Sensing |
Pilot, load sensing |
Pilot, load sensing |
Steering System - Pump |
- |
Piston, Variable Displacement |
Piston, variable displacement |
Piston, variable displacement |
Maximum Flow at 1,400-1,850 rpm |
- |
70 gal/min |
- |
- |
Steering Cut Off Pressure |
- |
4500 psi |
- |
- |
Total Steering Angle |
- |
80° |
70° |
70° |
Steering Cycle Times - Low Idle |
- |
4.9 s |
- |
5.2 s |
Steering Cycle Times - High Idle |
- |
3.1 s |
- |
3 s |
Maximum Flow at 1,400 rpm |
- |
- |
96.2 gal/min |
- |
Relief Valve Setting - Steering |
- |
- |
5004 psi |
4000 psi |
Maximum Flow |
- |
- |
- |
52 gal (US) |
Cooling System |
Ambient Capability Hydraulically Driven Demand Fan - Standard |
- |
109.4 °F |
- |
- |
Ambient Capability, Hydraulically Driven Demand Fan - High |
- |
131 °F |
- |
- |
Sound Performance - Standard |
Note |
- |
Machine Sound Level (ISO 6396:2008) - 116 dB(A) |
- |
- |
Operator Sound Level (ISO 6396:2008) |
- |
- |
65.5 dB(A) |
- |
Machine Sound Level (ISO 6395:2008) |
- |
- |
115 dB(A) |
- |
Sound Performance - Suppression |
Note |
- |
Machine Sound Level (ISO 6396:2008) - 113 dB(A) |
- |
- |
Operator Sound Level (ISO 6396:2008) |
- |
- |
65.5 dB(A) |
- |
Machine Sound Level (ISO 6395:2008) |
- |
- |
113 dB(A) |
- |
Dimensions - Standard Lift - Approximate |
Ground to Top of Exhaust Stacks |
- |
17 ft |
- |
- |
Ground to Top of ROPS |
- |
18.3 ft |
- |
- |
Ground to Top of Hood |
- |
13.1 ft |
- |
- |
Ground to Center of Front Axle |
- |
4.3 ft |
- |
- |
Ground to Bumper Clearance |
- |
3.8 ft |
- |
- |
Ground to Lower Hitch Clearance |
- |
2.2 ft |
- |
- |
Reach - Maximum Lift |
- |
8.2 ft |
- |
- |
Clearance at Maximum Lift |
- |
15.2 ft |
- |
- |
B-Pin Height - Maximum Lift |
- |
22.8 ft |
- |
- |
Maximum Overall Height - Bucket Raised |
- |
30.8 ft |
- |
- |
Rear Axle - Centerline to Bumper |
- |
13.5 ft |
- |
- |
Tread Width |
- |
10.83 ft |
- |
- |
Rack Back Angle - Maximum Lift |
- |
56.9 degrees |
- |
- |
Dump Angle at Maximum Lift |
- |
-49.5 degrees |
- |
- |
Rack Back Angle - Ground Level |
- |
40.2 degrees |
- |
- |
Width - Over Tires - With Bulge |
- |
14.74 ft |
- |
- |
Rack Back Angle - Carry |
- |
48.9 degrees |
- |
- |
Wheel Base |
- |
19.3 ft |
- |
- |
Maximum Overall Length |
- |
50.8 ft |
- |
- |
Front Axle Centerline to Bucket Tip |
- |
18 ft |
- |
- |
Dimensions - High Lift - Approximate |
Tread Width |
- |
10.83 ft |
- |
- |
Rack Back Angle - Ground Level |
- |
42.5 degrees |
- |
- |
Dump Angle at Maximum Lift |
- |
-48.1 degrees |
- |
- |
Rack Back Angle - Maximum Lift |
- |
56.2 degrees |
- |
- |
Width - Over Tires - With Bulge |
- |
14.75 ft |
- |
- |
Rack Back Angle - Carry |
- |
51.6 degrees |
- |
- |
Ground to Top of Exhaust Stacks |
- |
17 ft |
- |
- |
Ground to Top of ROPS |
- |
18.3 ft |
- |
- |
Ground to Top of Hood |
- |
13.1 ft |
- |
- |
Ground to Center of Front Axle |
- |
4.3 ft |
- |
- |
Ground to Bumper Clearance |
- |
3.8 ft |
- |
- |
Ground to Lower Hitch Clearance |
- |
2.2 ft |
- |
- |
Reach - Maximum Lift |
- |
7.6 ft |
- |
- |
Clearance at Maximum Lift |
- |
17.2 ft |
- |
- |
B-Pin Height - Maximum Lift |
- |
24.5 ft |
- |
- |
Maximum Overall Height - Bucket Raised |
- |
32 ft |
- |
- |
Rear Axle - Centerline to Bumper |
- |
13.5 ft |
- |
- |
Wheel Base |
- |
19.3 ft |
- |
- |
Maximum Overall Length |
- |
51.6 ft |
- |
- |
Front Axle Centerline to Bucket Tip |
- |
18.8 ft |
- |
- |
Operator's Cab |
ROPS/FOPS |
- |
- |
- |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
- |
- |
72 dB(A) |
Machine Sound Level (ISO 6395) |
- |
- |
- |
110 dB(A) |
Note (1) |
- |
- |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
Note (2) |
- |
- |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
Note (3) |
- |
- |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
Dimensions (Approximate) - High Lift |
Ground to Top of ROPS |
- |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
- |
10.7 ft |
Rear Axle - Centerline to Bumper |
- |
- |
- |
10.3 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
- |
15.7 ft |
Wheel Base |
- |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
- |
39.5 ft |
Ground to Lower Hitch Clearance |
- |
- |
- |
1.5 ft |
Clearance at Maximum Lift |
- |
- |
- |
12 ft |
B-Pin Height - Maximum Lift |
- |
- |
- |
18.7 ft |
Maximum Overall Height - Bucket Raised |
- |
- |
- |
25 ft |
Reach - Maximum Lift |
- |
- |
- |
7.7 ft |
Note |
- |
- |
- |
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. |
Sustainability |
Recyclability |
- |
- |
- |
96% |