|
|
|
|
Engine |
Engine Power @ 1,600 rpm - ISO 14396:2002 |
339 HP |
- |
- |
Gross Power @ 1,600 rpm - SAE J1995:2014 |
343 HP |
- |
- |
Engine Model |
Cat C9.3B |
Cat® C15 |
Cat C13 |
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 |
316 HP |
- |
- |
Note (1) |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
- |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
- |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 |
1287 ft-lb |
- |
- |
Displacement |
9.3 L |
927 in³ |
12.5 L |
Engine Torque @ 1,200 rpm – ISO 14396:2002 |
1375 lb/ft |
- |
1612 lb/ft |
Note (3) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
- |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
Gross Torque @ 1,200 rpm – SAE J1995:2014 |
1388 lb/ft |
- |
1627 lb/ft |
Rated Speed |
- |
2000 |
- |
Peak Power Speed |
- |
1600 |
- |
Engine Power - ISO 14396 |
- |
449 HP |
- |
Gross Power - SAE J1995 |
- |
456 HP |
- |
Net Power - SAE J1349 |
- |
373 HP |
- |
Emissions |
- |
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 |
- |
Bore |
- |
5.4 in |
- |
Stroke |
- |
6.75 in |
- |
Peak Torque - 1,200 rpm - SAE J1995 |
- |
1778 ft·lbf |
- |
Torque Rise |
- |
16% |
- |
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
- |
393 HP |
Gross Power @ 1,700 rpm – SAE J1995:2014 |
- |
- |
425 HP |
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
- |
1539 lb/ft |
Engine Power @ 1,700 rpm – ISO 14396:2002 |
- |
- |
429 HP |
Weights |
Operating Weight |
54858 lb |
- |
66877 lb |
Note |
Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, second |
- |
Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s |
Bucket Capacities |
Bucket Range |
2.8-14.0 m³ 3.75-18.25 yd³ |
- |
4.0-14.5 m³ 5.25-19 yd³ |
Transmission |
Forward - 1 |
4.1 mile/h |
5 mile/h |
4.3 mile/h |
Forward - 2 |
8.4 mile/h |
8 mile/h |
8.3 mile/h |
Forward - 3 |
15 mile/h |
- |
14.6 mile/h |
Forward - 4 |
24.5 mile/h |
- |
24.5 mile/h |
Note |
Maximum travel speed in standard vehicle with empty bucket and
standard L3 tires with 849 mm (33 in) roll radius. |
- |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. |
Reverse - 1 |
4.5 mile/h |
5 mile/h |
4.8 mile/h |
Reverse - 2 |
9.2 mile/h |
8 mile/h |
9.4 mile/h |
Reverse - 3 |
16.5 mile/h |
- |
16.7 mile/h |
Reverse - 4 |
24.5 mile/h |
- |
24.5 mile/h |
Transmission Type |
- |
Cat planetary power shift |
- |
Direct Drive - Forward 1 |
- |
Lock-up disabled |
- |
Direct Drive - Forward 2 |
- |
8 mile/h |
- |
Direct Drive - Forward 3 |
- |
14 mile/h |
- |
Direct Drive - Forward 4 |
- |
24 mile/h |
- |
Direct Drive - Reverse 1 |
- |
Lock-up disabled |
- |
Direct Drive - Reverse 2 |
- |
9 mile/h |
- |
Direct Drive - Reverse 3 |
- |
16 mile/h |
- |
Direct Drive - Reverse 4 |
- |
25.4 mile/h |
- |
Sound |
Note (1) |
** For machines in European Union countries and in countries that adopt the EU Directives. |
- |
** For machines in European Union countries and in countries that adopt the �EU Directives.� |
Note (2) |
***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
- |
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
108 |
- |
109 |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
69 dB(A) |
- |
72 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
109 dB(A) |
- |
112 dB(A) |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
76 |
- |
78 |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
70 dB(A) |
- |
72 dB(A) |
With Cooling Fan Speed at Maximum Value - Note |
Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
- |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2
equivalent 2.288 metric tonnes (2.522 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
Operating Specifications |
Breakout Force |
44072 lb |
- |
51008 lb |
Note (1) |
For a machine configuration as defined under Weight. |
- |
For a machine configuration as defined under �Weight.� |
Note (2) |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
- |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Static Tipping Load - Full 40° Turn - No Tire Deflection |
17505 kg |
- |
20965 kg |
Static Tipping Load - Full 40° Turn - With Tire Deflection |
35919 lb |
- |
43432 lb |
Operating Weight |
- |
116858 lb |
- |
Rated Payload - Quarry Face |
- |
12.5 ton (US) |
- |
Bucket Capacity Range |
- |
6.4-7.6 m3 (8.3-10 yd3) |
- |
Cat Truck Match - High Lift |
- |
772/773/775 |
- |
Service Refill Capacities |
Cooling System |
17.4 gal (US) |
27 gal (US) |
13.7 gal (US) |
Crankcase |
6.1 gal (US) |
- |
9.8 gal (US) |
DEF Tank |
6.9 gal (US) |
- |
5.5 gal (US) |
Differential - Final Drives - Front |
15.1 gal (US) |
49 gal (US) |
22.2 gal (US) |
Differential - Final Drives - Rear |
15.1 gal (US) |
45 gal (US) |
22.4 gal (US) |
Fuel Tank |
80.1 gal (US) |
141 gal (US) |
112.5 gal (US) |
Hydraulic Tank |
30.1 gal (US) |
- |
40.4 gal (US) |
Transmission |
15.5 gal (US) |
20 gal (US) |
20.3 gal (US) |
Engine Crankcase |
- |
9 gal (US) |
- |
Diesel Exhaust Fluid Tank |
- |
5.5 gal (US) |
- |
Note |
- |
Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a |
- |
Hydraulic System |
Implement System - Maximum Operating Pressure |
4496 psi |
- |
4975 psi |
Implement System - Maximum Pump Output at 2,250 rpm |
99 gal/min |
- |
119 gal/min |
Hydraulic Cycle Time - Total |
10.7 seconds |
- |
- |
Dimensions |
Note |
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
- |
All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
Dimensions - High Lift |
Centerline of Rear Axle to Edge of Counterweight |
8.1 ft |
- |
8.9 ft |
Centerline of Rear Axle to Hitch |
5.1 ft |
- |
6.3 ft |
Ground Clearance |
1.4 ft |
- |
1.5 ft |
Height - Top of Exhaust Pipe |
11.8 ft |
- |
12.5 ft |
Height - Top of Hood |
9.5 ft |
- |
10.1 ft |
Height - Top of ROPS |
11.1 ft |
- |
12.7 ft |
Hinge Pin Height at Carry |
2.6 ft |
- |
2.2 ft |
Hinge Pin Height at Maximum Lift |
15.9 ft |
- |
15.7 ft |
Lift Arm Clearance at Maximum Lift |
13.8 ft |
- |
13.6 ft |
Overall Length - Without Bucket |
26.6 ft |
- |
27.5 ft |
Tread Width |
7.3 ft |
- |
8 ft |
Wheel Base |
11.8 ft |
- |
12.6 ft |
Width over Tires (Loaded) |
9.11 ft |
- |
10.9 ft |
Rack Back at Ground |
37 degrees |
- |
40 degrees |
Rack Back - Maximum Lift |
71 degrees |
- |
61 degrees |
Rack Back - Carry Height |
49 degrees |
- |
50 degrees |
Dimensions - Standard Lift |
Centerline of Rear Axle to Hitch |
5.1 ft |
- |
6.3 ft |
Ground Clearance |
420 mm |
- |
456 mm |
Height - Top of Exhaust Pipe |
3527 mm |
- |
3764 mm |
Height - Top of Hood |
2846 mm |
- |
3064 mm |
Height - Top of ROPS |
3589 mm |
- |
3829 mm |
Hinge Pin Height at Carry |
2.2 ft |
- |
2.2 ft |
Hinge Pin Height at Maximum Lift |
4464 mm |
- |
4554 mm |
Lift Arm Clearance at Maximum Lift |
3843 mm |
- |
3881 mm |
Overall Length - Without Bucket |
7731 mm |
- |
8155 mm |
Tread Width |
7.3 ft |
- |
8 ft |
Wheel Base |
3550 mm |
- |
3800 mm |
Width over Tires (Loaded) |
9.11 ft |
- |
10.9 ft |
Rack Back - Carry Height |
49 degrees |
- |
50 degrees |
Rack Back at Ground |
39 degrees |
- |
40 degrees |
Centerline of Rear Axle to Edge of Counterweight |
8 ft |
- |
2661 mm |
Rack Back - Maximum Lift |
56 degrees |
- |
61 degrees |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
EH - Load Sense |
- |
Lift/Tilt System |
- |
2X x 145 cc Variable displacement piston |
- |
Maximum Flow at 2,165 rpm |
- |
159 gal/min |
- |
Relief Valve Setting - Lift/Tilt |
- |
4598 psi |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
190 mm x 1216 mm (7.5 in x 48 in) |
- |
Cylinders, Double Acting - Tilt, Bore and Stroke |
- |
170 mm x 722 mm (6.7 in x 28.4 in) |
- |
Pilot System |
- |
Variable displacement piston |
- |
Tilt Cylinder - Stroke |
- |
27 in |
- |
Hydraulic Cycle Times |
Rack Back |
- |
3.8 s |
- |
Raise |
- |
7.5 s |
- |
Dump |
- |
3 s |
- |
Lower Float Down |
- |
4.6 s |
- |
Total Hydraulic Cycle Time - Empty Bucket |
- |
18.9 s |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
Pilot, load sensing |
- |
Steering System - Pump |
- |
Piston, variable displacement |
- |
Maximum Flow |
- |
52 gal (US) |
- |
Relief Valve Setting - Steering |
- |
4000 psi |
- |
Total Steering Angle |
- |
70° |
- |
Steering Cycle Times - High Idle |
- |
3 s |
- |
Steering Cycle Times - Low Idle |
- |
5.2 s |
- |
Axles |
Front |
- |
Fixed |
- |
Rear |
- |
Trunnion |
- |
Oscillation Angle |
- |
+/-12.5° |
- |
Brakes |
Brakes |
- |
ISO 3450:2011 |
- |
Operator's Cab |
ROPS/FOPS |
- |
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
72 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
110 dB(A) |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
- |
Dimensions (Approximate) - High Lift |
Ground to Top of ROPS |
- |
13.5 ft |
- |
Ground to Top of Exhaust Stacks |
- |
13.3 ft |
- |
Ground to Top of Hood |
- |
10.7 ft |
- |
Rear Axle - Centerline to Bumper |
- |
10.3 ft |
- |
Front Axle Centerline to Bucket Tip |
- |
15.7 ft |
- |
Wheel Base |
- |
12.5 ft |
- |
Maximum Overall Length |
- |
39.5 ft |
- |
Ground to Lower Hitch Clearance |
- |
1.5 ft |
- |
Clearance at Maximum Lift |
- |
12 ft |
- |
B-Pin Height - Maximum Lift |
- |
18.7 ft |
- |
Maximum Overall Height - Bucket Raised |
- |
25 ft |
- |
Reach - Maximum Lift |
- |
7.7 ft |
- |
Note |
- |
Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. |
- |
Buckets |
Bucket Capacities |
- |
6.4-7.6 m3 (8.3-10 yd3) |
- |
Sustainability |
Recyclability |
- |
96% |
- |