CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    966 XE
    View Product
    992 Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove
    988 XE Wheel Loader
    View Product Remove

    Engine
    Engine Power @ 1,600 rpm - ISO 14396:2002 321 HP - - -
    Gross Power @ 1,600 rpm - SAE J1995:2014 325 HP - - -
    Engine Model Cat C9.3B Cat® C32B Cat® 3516E Cat® C18 ™
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 298 HP - - -
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. - The power ratings apply when tested under the reference conditions for the specified standard. -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. -
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1226 HP - - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - The gross power advertised is with the fan at maximum speed. -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1327 lb/ft - - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1313 lb/ft - - -
    Displacement 9.3 L 1963.5 in³ 4766 in³ 1105 in³
    Net Power - 814 HP - -
    Emissions - U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
    Rated Speed - 1750 rpm - 1,700 rpm
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - 900 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - 937 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - 907 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - 944 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - 884 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - 921 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - 893 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - 931 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - 823 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - 823 HP - -
    Bore - 5.7 in 6.7 in 5.7 in
    Stroke - 6.4 in 8.5 in 7.2 in
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - 3514 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - 3555 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - 3537 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - 3570 ft·lbf - -
    Engine Power - ISO 14396 - - 1847 HP -
    Gross Power - SAE J1995 - - 1870 HP -
    Net Power - SAE J1349 - Standard Ambient - - 1739 HP -
    Net Power - SAE J1349 - High Ambient - - 1696 HP -
    Peak Torque - 1,200 rpm - SAE J1995 - - 8549 lb/ft 2230 ft·lbf
    Torque Rise - - 39% 58%
    Net Power - SAE J1349 - - - 538 HP
    Engine Power - ISO 14396:2002 - - - 580 HP
    Gross Power - SAE J1995:2014 - - - 588 HP
    Peak Power Speed - - - 1,500 rpm

    Weights
    Operating Weight 51124 lb - - -
    Note Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec - - -

    Bucket Capacities
    Bucket Range 2.8-11.9 m³ 3.75-15.5 yd³ - - -

    Transmission
    Forward - 1 4.3 mile/h 4.3 mile/h 4.6 mile/h -
    Forward - 2 8 mile/h 7.4 mile/h 8 mile/h -
    Forward - 3 14.1 mile/h 12.7 mile/h 13.6 mile/h -
    Forward - 4 24.5 mile/h - - -
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. - Travel speeds based on 58/85-57 tires. -
    Reverse - 1 4.3 mile/h 4.7 mile/h 5 mile/h -
    Reverse - 2 8 mile/h 8.1 mile/h 8.8 mile/h -
    Reverse - 3 17.9 mile/h 13.9 mile/h 14.9 mile/h -
    Transmission Type - Cat Planetary Powershift Cat Planetary Power Shift Cat switched reluctance electric drive
    Direct Drive - Forward 1 - Disabled Lock-up disables -
    Direct Drive - Forward 2 - 8 mile/h 8.7 mile/h -
    Direct Drive - Forward 3 - 14 mile/h 15.2 mile/h -
    Direct Drive - Reverse 1 - 5 mile/h Lock-up disables -
    Direct Drive - Reverse 2 - 8.8 mile/h 9.6 mile/h -
    Direct Drive - Reverse 3 - 15.3 mile/h 16.8 mile/h -
    Forward 1 (virtual) - - - 4.3 mile/h
    Forward 2 (virtual) - - - 7 mile/h
    Forward 3 (virtual) - - - 13.8 mile/h
    Forward 4 (virtual) - - - 20 mile/h
    Reverse 1 (virtual) - - - 4.3 mile/h
    Reverse 2 (virtual) - - - 7 mile/h
    Reverse 3 (virtual) - - - 17.5 mile/h

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - - -
    Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 105 - - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 107 dB(A) - - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 74 - - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 67 dB(A) - - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operating Specifications
    Breakout Force 38999 lb - - -
    Note (1) For a machine configuration as defined under �Weight.� - - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 15981 kg - - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 32727 lb - - -
    Operating Weight - 233430 lb - 116362 lb
    Rated Payload - Standard - 25.5 ton (US) - -
    Rated Payload - Standard (Material Handler) - 30 ton (US) - -
    Rated Payload - High Lift - 22.5 ton (US) - -
    Rated Payload - High Lift (Material Handler) - 27 ton (US) - -
    Bucket Capacity Range - 11.5-24.5 m³ (15-32 yd³) 17.2-43.6 m3 (22.3-57 yd3) 4.7-13 m3 (6.2-17 yd3)
    Cat Truck Match - Standard - 775/777 785/789 -
    Cat Truck Match - High Lift - 785 789/793/794 -
    Operating Weight - Standard - - 543772 lb 116362 lb
    Operating Weight - High Lift - - 547675 lb 119618 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US) -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US) -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US) -
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US) -
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload. -
    Rated Payload - Standard (Quarry Face) - - - 12.5 ton (US)
    Rated Payload - Loose Material (Standard) - - - 16 ton (US)

    Service Refill Capacities
    Cooling System 17.4 gal (US) - - -
    Crankcase 6.1 gal (US) 31.7 gal (US) - -
    DEF Tank 6.9 gal (US) - - -
    Differential - Final Drives - Front 15.1 gal (US) 96.4 gal (US) - 49 gal (US)
    Differential - Final Drives - Rear 15.1 gal (US) 96.4 gal (US) - 49 gal (US)
    Fuel Tank 80.1 gal (US) 385.7 gal (US) - 147 gal (US)
    Hydraulic Tank 30.1 gal (US) - - -
    Transmission 16.6 gal (US) 51.5 gal (US) - 16 gal (US)
    Cooling Systems - 59.4 gal (US) - -
    Hydraulic System Factory Fill (Implement) - 104.1 gal (US) - -
    Hydraulic Tank - Implement - 60.2 gal (US) - -
    Hydraulic Factory Fill (Steering) - 32.5 gal (US) - -
    Hydraulic Tank (Steering Tank Only) - 26.3 gal (US) - -
    Cooling System - Jacket Water - - - 30 gal (US)
    Cooling Systems - Power Train - - - 8 gal (US)
    Engine Crankcase - - - 16 gal (US)
    Diesel Exhaust Fluid Tank - - - 8.7 gal (US)
    Hydraulic System - Implement/Steering - - - 126 gal (US)
    Note - - - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati

    Hydraulic System
    Implement System - Maximum Operating Pressure 4496 psi - - -
    Implement System - Maximum Pump Output at 2,250 rpm 92 gal/min - - -
    Hydraulic Cycle Time - Total 10.1 seconds - - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. - - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.1 ft - - -
    Centerline of Rear Axle to Hitch 5.1 ft - - -
    Ground Clearance 1.4 ft - - -
    Height - Top of Exhaust Pipe 11.8 ft - - -
    Height - Top of Hood 9.5 ft - - -
    Height - Top of ROPS 11.1 ft - - -
    Hinge Pin Height at Carry 2.6 ft - - -
    Hinge Pin Height at Maximum Lift 15.9 ft - - -
    Lift Arm Clearance at Maximum Lift 13.8 ft - - -
    Overall Length - Without Bucket 26.6 ft - - -
    Tread Width 7.3 ft - - -
    Wheel Base 11.8 ft - - -
    Rack Back at Ground 37 degrees - - -
    Width over Tires (Loaded) 9.11 ft - - -
    Rack Back - Maximum Lift 71 degrees - - -
    Rack Back - Carry Height 49 degrees - - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight 7.7 ft - - -
    Centerline of Rear Axle to Hitch 5.1 ft - - -
    Ground Clearance 424 mm - - -
    Height - Top of Exhaust Pipe 3531 mm - - -
    Height - Top of Hood 2580 mm - - -
    Height - Top of ROPS 3593 mm - - -
    Hinge Pin Height at Carry 2 ft - - -
    Hinge Pin Height at Maximum Lift 4245 mm - - -
    Lift Arm Clearance at Maximum Lift 3687 mm - - -
    Overall Length - Without Bucket 7399 mm - - -
    Tread Width 7.3 ft - - -
    Wheel Base 3550 mm - - -
    Width over Tires (Loaded) 9.11 ft - - -
    Rack Back - Carry Height 50 degrees - - -
    Rack Back at Ground 40 degrees - - -
    Rack Back - Maximum Lift 62 degrees - - -

    Buckets
    Bucket Capacities - 11.5-24.5 m³ (15-32 yd³) - 4.7-13 m3 (6.2-17 yd3)

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control Positive Flow Control EH-Positive Flow Control, Flow Sharing
    Lift/Tilt System - Pump - Variable Displacement Piston Variable Displacement Piston Variable displacement piston
    Maximum Flow at 2,165 rpm - 250 gal/min - -
    Relief Valve Setting - Lift/Tilt - 5000 psi 5004 psi 4757 psi
    Lift Cylinder - Bore - 9.3 in - 8.7 in
    Lift Cylinder - Stroke - 63.5 in - 41.3 in
    Tilt Cylinder - Bore - 11.5 in - 8.7 in
    Tilt Cylinder - Stroke - 41.5 in - 27 in
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - - 370 × 1713 mm (14.6 × 67.4 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 310 × 1086 mm (12.2 × 42.8 in) -
    Pilot System - - Open Loop and Pressure Reducing -
    Maximum Flow at 1,400-1,600 rpm - - - 153 gal/min

    Hydraulic Cycle Times
    Rack Back - 2.3 s 4.9 s 4.5 s
    Rack Back - High Lift - 2.3 s - -
    Raise - 9 s 12.6 s 8 s
    Raise - High Lift - 9 s - -
    Dump - 2.6 s 3.1 s 2.2 s
    Dump - High Lift - 2.6 s - -
    Float Down - 3.2 s - -
    Float Down - High Lift - 3.2 s - -
    Total Hydraulic Cycle Time - 17.1 s - 18.2 s
    Lower Float Down - - 4.2 s 3.5 s

    Axles
    Front - Fixed Fixed Fixed
    Rear - Trunnion Trunnion Trunnion
    Oscillation Angle - ±9° 9° 13°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011 ISO 3450:2011

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing Pilot, Load Sensing Pilot, load sensing
    Steering System - Pump - Piston, Variable Displacement Piston, Variable Displacement Piston, variable displacement
    Maximum Flow at 1,400-1,850 rpm - 70 gal/min - -
    Steering Cut Off Pressure - 4500 psi - 4351 psi
    Total Steering Angle - 80° 80 degrees 86°
    Steering Cycle Times - Low Idle - 4.9 s 7.6 s 5.6 s
    Steering Cycle Times - High Idle - 3.1 s 4.3 s 3.4 s
    Maximum Flow at 1,400-1,600 rpm - - - 71.3 gal/min

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F 109.4 °F -
    Ambient Capability, Hydraulically Driven Demand Fan - High - 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F -

    Sound Performance - Standard
    Note - Machine Sound Level (ISO 6396:2008) - 116 dB(A) The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A) -
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A) -

    Sound Performance - Suppression
    Note - Machine Sound Level (ISO 6396:2008) - 113 dB(A) The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A) -
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A) -

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - 17 ft 23.2 ft -
    Ground to Top of ROPS - 18.3 ft 23.4 ft -
    Ground to Top of Hood - 13.1 ft 18.6 ft -
    Ground to Center of Front Axle - 4.3 ft - -
    Ground to Bumper Clearance - 3.8 ft 4.4 ft -
    Ground to Lower Hitch Clearance - 2.2 ft 2.9 ft -
    Reach - Maximum Lift - 8.2 ft 9.6 ft -
    Clearance at Maximum Lift - 15.2 ft 19.8 ft -
    B-Pin Height - Maximum Lift - 22.8 ft 28.8 ft -
    Maximum Overall Height - Bucket Raised - 30.8 ft 39.3 ft -
    Rear Axle - Centerline to Bumper - 13.5 ft 20.4 ft -
    Tread Width - 10.83 ft 14.1 ft -
    Rack Back Angle - Maximum Lift - 56.9 degrees - -
    Dump Angle at Maximum Lift - -49.5 degrees –50.0 degrees -
    Rack Back Angle - Ground Level - 40.2 degrees 39.7 degrees -
    Width - Over Tires - With Bulge - 14.74 ft 18.8 ft -
    Rack Back Angle - Carry - 48.9 degrees 47.7 degrees -
    Wheel Base - 19.3 ft 22.3 ft -
    Maximum Overall Length - 50.8 ft 64.6 ft -
    Front Axle Centerline to Bucket Tip - 18 ft 21.9 ft -
    Ground to Center of Axles - - 6 ft -
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
    Rack Angle at Maximum Lift - - 59.5 degrees -

    Dimensions - High Lift - Approximate
    Tread Width - 10.83 ft 14.1 ft -
    Rack Back Angle - Ground Level - 42.5 degrees 45 degrees -
    Dump Angle at Maximum Lift - -48.1 degrees –50.0 degrees -
    Rack Back Angle - Maximum Lift - 56.2 degrees - -
    Width - Over Tires - With Bulge - 14.75 ft 18.8 ft -
    Rack Back Angle - Carry - 51.6 degrees 53.5 degrees -
    Ground to Top of Exhaust Stacks - 17 ft 23.2 ft -
    Ground to Top of ROPS - 18.3 ft 23.4 ft -
    Ground to Top of Hood - 13.1 ft 18.6 ft -
    Ground to Center of Front Axle - 4.3 ft - -
    Ground to Bumper Clearance - 3.8 ft 4.4 ft -
    Ground to Lower Hitch Clearance - 2.2 ft 2.9 ft -
    Reach - Maximum Lift - 7.6 ft 9.4 ft -
    Clearance at Maximum Lift - 17.2 ft 22.6 ft -
    B-Pin Height - Maximum Lift - 24.5 ft 31.6 ft -
    Maximum Overall Height - Bucket Raised - 32 ft 42.1 ft -
    Rear Axle - Centerline to Bumper - 13.5 ft 20.4 ft -
    Wheel Base - 19.3 ft 22.3 ft -
    Maximum Overall Length - 51.6 ft 66.9 ft -
    Front Axle Centerline to Bucket Tip - 18.8 ft 24.2 ft -
    Ground to Center of Axles - - 6 ft -
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. -
    Rack Angle at Maximum Lift - - 59.4 degrees -

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US) -
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US) -
    Cooling System - - 138 gal (US) -
    Engine Crankcase - - 76 gal (US) -
    Transmission - - 110 gal (US) -
    Differential - Final Drives - Front - - 220 gal (US) -
    Differential - Final Drives - Rear - - 200 gal (US) -
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US) -
    Hydraulic Tank - Steering and Braking - - 100 gal (US) -
    Oil Renewal System (ORS)* - - 20 gal (US) -
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions. -

    Operator's Cab
    ROPS/FOPS - - - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - - 109 dB(A)

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - - 72 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - - 110 dB(A)

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - - - 13.8 ft
    Ground to Top of Exhaust Stacks - - - 14.8 ft
    Ground to Top of Hood - - - 10.9 ft
    Ground to Bumper Clearance - - - 3.1 ft
    Rear Axle - Centerline to Bumper - - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - - 14 ft
    Wheel Base - - - 14.9 ft
    Maximum Overall Length - - - 39.3 ft
    Ground to Lower Hitch Clearance - - - 1.9 ft
    Ground to Center of Axles - - - 3.2 ft
    Clearance at Maximum Lift - - - 11.9 ft
    B-Pin Height - Maximum Lift - - - 18 ft
    Maximum Overall Height - Bucket Raised - - - 24.5 ft
    Reach - Maximum Lift - - - 6.5 ft
    Note - - - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - - - 13.8 ft
    Ground to Top of Exhaust Stacks - - - 14.8 ft
    Ground to Top of Hood - - - 10.9 ft
    Ground to Bumper Clearance - - - 3.1 ft
    Rear Axle - Centerline to Bumper - - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - - 15.3 ft
    Wheel Base - - - 14.9 ft
    Maximum Overall Length - - - 40.7 ft
    Ground to Lower Hitch Clearance - - - 1.9 ft
    Ground to Center of Axles - - - 3.2 ft
    Clearance at Maximum Lift - - - 13.3 ft
    B-Pin Height - Maximum Lift - - - 19.3 ft
    Maximum Overall Height - Bucket Raised - - - 25.8 ft
    Reach - Maximum Lift - - - 6.8 ft
    Note - - - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - - - 13.8 ft
    Ground to Top of Exhaust Stacks - - - 13.8 ft
    Ground to Top of Hood - - - 10.9 ft
    Ground to Bumper Clearance - - - 3.1 ft
    Rear Axle - Centerline to Bumper - - - 10.5 ft
    Front Axle Centerline to Fork Tip - - - 16.5 ft
    Wheel Base - - - 14.9 ft
    Maximum Overall Length - - - 41.9 ft
    Ground to Lower Hitch Clearance - - - 1.9 ft
    Ground to Center of Front Axle - - - 3.2 ft
    Fork Height with Level Arms - - - 8.1 ft
    Fork Top Clamp Opening - - - 13.1 ft
    Fork Height at Maximum Lift - - - 17.2 ft
    Hinge Pin Height at Maximum Lift - - - 16.1 ft
    Dump Angle at Maximum Lift - - - -39.4 °

    Sustainability
    Recyclability - - - 96%
    Add a Similar Product: