|
|
|
|
|
Engine |
Engine Power @ 1,600 rpm - ISO 14396:2002 |
321 HP |
- |
- |
- |
Gross Power @ 1,600 rpm - SAE J1995:2014 |
325 HP |
- |
- |
- |
Engine Model |
Cat C9.3B |
Cat C13 |
Cat C13 |
C15 Cat® |
Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 |
298 HP |
- |
- |
- |
Note (1) |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
- |
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
- |
Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 |
1226 HP |
- |
- |
- |
Note (3) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
- |
Gross Torque @ 1,200 rpm – SAE J1995:2014 |
1327 lb/ft |
1636 lb/ft |
1636 lb/ft |
- |
Engine Torque @ 1,200 rpm – ISO 14396:2002 |
1313 lb/ft |
1620 lb/ft |
1620 lb/ft |
- |
Displacement |
9.3 L |
- |
12.5L |
927 in² |
Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
404 HP |
404 HP |
- |
Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
- |
1515 lb/ft |
1515 lb/ft |
- |
Engine Power @ 1,700 rpm – ISO 14396:2002 |
- |
432 HP |
432 HP |
- |
Gross Power @ 1,700 rpm – SAE J1995:2014 |
- |
436 HP |
436 HP |
- |
Peak Power Speed |
- |
- |
- |
1600 |
Peak Power Speed - Gross - SAE J1995 |
- |
- |
- |
456 HP |
Engine Power - ISO 14396 |
- |
- |
- |
449 HP |
Net Power - SAE J1349 |
- |
- |
- |
373 HP |
Rated Speed |
- |
- |
- |
2000 |
Rated Speed - 2,000 rpm - EEC 80/1269 |
- |
- |
- |
373 HP |
Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) |
- |
- |
- |
378 HP |
Rated Speed - 2,000 rpm - ISO 9249 |
- |
- |
- |
373 HP |
Rated Speed - 2,000 rpm - ISO 9249 (DIN) |
- |
- |
- |
378 HP |
Bore |
- |
- |
- |
5.4 in |
Stroke |
- |
- |
- |
6.75 in |
Peak Torque - 1,200 rpm - SAE J1995 |
- |
- |
- |
1778 lb/ft |
Torque Rise |
- |
- |
- |
16% |
Emissions |
- |
- |
- |
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA |
Weights |
Operating Weight |
51124 lb |
78264 lb |
78264 lb |
- |
Note |
Weight based on a machine configuration with Bridgestone 26.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, front manual differential/open rear axles, power train guard, sec |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, soun |
- |
Bucket Capacities |
Bucket Range |
2.8-11.9 m³ 3.75-15.5 yd³ |
4.8-17.2 m³ 6.25-22.5 yd³ |
4.8-17.2 m³ 6.25-22.5 yd³ |
- |
Transmission |
Forward - 1 |
4.3 mile/h |
3.9 mile/h |
3.9 mile/h |
5 mile/h |
Forward - 2 |
8 mile/h |
7.4 mile/h |
7.3 mile/h |
8 mile/h |
Forward - 3 |
14.1 mile/h |
13.1 mile/h |
13 mile/h |
- |
Forward - 4 |
24.5 mile/h |
23.3 mile/h |
24.5 mile/h |
- |
Note |
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
- |
Reverse - 1 |
4.3 mile/h |
4.3 mile/h |
4.4 mile/h |
5 mile/h |
Reverse - 2 |
8 mile/h |
8.5 mile/h |
8.4 mile/h |
8 mile/h |
Reverse - 3 |
17.9 mile/h |
15 mile/h |
17.4 mile/h |
- |
Reverse - 4 |
- |
24.5 mile/h |
- |
- |
Transmission Type |
- |
- |
- |
Cat planetary power shift |
Direct Drive - Forward 2 |
- |
- |
- |
8 mile/h |
Direct Drive - Forward 3 |
- |
- |
- |
14 mile/h |
Direct Drive - Forward 4 |
- |
- |
- |
24 mile/h |
Direct Drive - Reverse 2 |
- |
- |
- |
9 mile/h |
Direct Drive - Reverse 3 |
- |
- |
- |
16 mile/h |
Direct Drive - Reverse 4 |
- |
- |
- |
25.4 mile/h |
Sound |
Note (1) |
** For machines in European Union countries and in countries that adopt the EU Directives. |
** For machines in European Union countries and in countries that adopt the �EU Directives.� |
* For machines in European Union countries and in countries that adopt the “EU Directives.” |
- |
Note (2) |
***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� |
European Union Directive “2000/14/EC” as amended by “2005/88/EC.” |
- |
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* |
105 |
109 |
107 |
- |
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) |
67 dB(A) |
72 dB(A) |
70 dB(A) |
- |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) |
107 dB(A) |
112 dB(A) |
110 dB(A) |
- |
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) |
74 |
78 |
75 |
- |
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) |
67 dB(A) |
72 dB(A) |
70 dB(A) |
- |
With Cooling Fan Speed at Maximum Value - Note |
Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
- |
- |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Operating Specifications |
Breakout Force |
38999 lb |
59060 lbf |
59060 lbf |
- |
Note (1) |
For a machine configuration as defined under �Weight.� |
For a machine configuration as defined under �Weight.� |
For a machine configuration as defined under Weight. |
- |
Note (2) |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
- |
Static Tipping Load - Full 40° Turn - No Tire Deflection |
15981 kg |
22418 kg |
22418 kg |
- |
Static Tipping Load - Full 40° Turn - With Tire Deflection |
32727 lb |
46526 lb |
46526 lb |
- |
Operating Weight - Standard |
- |
- |
- |
97785 lb |
Operating Weight - High Lift |
- |
- |
- |
104005 lb |
Rated Payload - Standard (Quarry Face) |
- |
- |
- |
11 ton (US) |
Rated Payload - Loose Material (Standard) |
- |
- |
- |
14 ton (US) |
Rated Payload - High Lift (Quarry Face) |
- |
- |
- |
11 ton (US) |
Rated Payload - Loose Material (High Lift) |
- |
- |
- |
12.1 ton (US) |
Bucket Capacity Range |
- |
- |
- |
5-10,3 m³ (6,5-13,5 yd.³) |
Cat Truck Match - Standard |
- |
- |
- |
770/735/740/745 |
Cat Truck Match - High Lift |
- |
- |
- |
772/773 |
Service Refill Capacities |
Cooling System |
17.4 gal (US) |
13.7 gal (US) |
13.7 gal (US) |
- |
Crankcase |
6.1 gal (US) |
9.8 gal (US) |
9.8 gal (US) |
9 gal (US) |
DEF Tank |
6.9 gal (US) |
5.5 gal (US) |
5.5 gal (US) |
- |
Differential - Final Drives - Front |
15.1 gal (US) |
24.3 gal (US) |
24.3 gal (US) |
- |
Differential - Final Drives - Rear |
15.1 gal (US) |
24.3 gal (US) |
24.3 gal (US) |
- |
Fuel Tank |
80.1 gal (US) |
112.5 gal (US) |
112.5 gal (US) |
141 gal (US) |
Hydraulic Tank |
30.1 gal (US) |
40.4 gal (US) |
40.4 gal (US) |
- |
Transmission |
16.6 gal (US) |
20.3 gal (US) |
20.3 gal (US) |
20 gal (US) |
Fuel Tank - Short Lift |
- |
- |
- |
127 gal (US) |
Cooling Systems |
- |
- |
- |
26 gal (US) |
Diesel Exhaust Fluid Tank |
- |
- |
- |
6 gal (US) |
Axle Oil - Differentials and Final Drives - Front |
- |
- |
- |
49 gal (US) |
Axle Oil - Differentials and Final Drives - Rear |
- |
- |
- |
45 gal (US) |
Hydraulic System Factory Fill |
- |
- |
- |
87 gal (US) |
Hydraulic System - Tank Only |
- |
- |
- |
34 gal (US) |
Hydraulic System |
Implement System - Maximum Operating Pressure |
4496 psi |
4975 psi |
4975 psi |
- |
Implement System - Maximum Pump Output at 2,250 rpm |
92 gal/min |
119 gal/min |
119 gal/min |
- |
Hydraulic Cycle Time - Total |
10.1 seconds |
- |
10.1 seconds |
- |
Dimensions |
Note |
All dimensions are approximate and based on machine equipped with 4.2 m3 (5.5 yd3) general purpose bucket with BOCE and Bridgestone 26.5R25 VJT L3 radial tires. |
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
- |
Dimensions - High Lift |
Centerline of Rear Axle to Edge of Counterweight |
8.1 ft |
9.4 ft |
9.4 ft |
- |
Centerline of Rear Axle to Hitch |
5.1 ft |
6.3 ft |
6.3 ft |
- |
Ground Clearance |
1.4 ft |
1.4 ft |
1.4 ft |
- |
Height - Top of Exhaust Pipe |
11.8 ft |
12.4 ft |
12.4 ft |
- |
Height - Top of Hood |
9.5 ft |
10 ft |
10 ft |
- |
Height - Top of ROPS |
11.1 ft |
12.6 ft |
12.6 ft |
- |
Hinge Pin Height at Carry |
2.6 ft |
2.11 ft |
2.11 ft |
- |
Hinge Pin Height at Maximum Lift |
15.9 ft |
16.1 ft |
16.1 ft |
- |
Lift Arm Clearance at Maximum Lift |
13.8 ft |
13.4 ft |
13.4 ft |
- |
Overall Length - Without Bucket |
26.6 ft |
29.11 ft |
29.11 ft |
- |
Tread Width |
7.3 ft |
8.4 ft |
8.4 ft |
- |
Wheel Base |
11.8 ft |
12.6 ft |
12.6 ft |
- |
Rack Back at Ground |
37 degrees |
- |
- |
- |
Width over Tires (Loaded) |
9.11 ft |
11.5 ft |
11.5 ft |
- |
Rack Back - Maximum Lift |
71 degrees |
- |
- |
- |
Rack Back - Carry Height |
49 degrees |
- |
- |
- |
Dimensions - Standard Lift |
Centerline of Rear Axle to Edge of Counterweight |
7.7 ft |
8.9 ft |
8.95 ft |
- |
Centerline of Rear Axle to Hitch |
5.1 ft |
6.3 ft |
6.3 ft |
- |
Ground Clearance |
424 mm |
428 mm |
428 mm |
- |
Height - Top of Exhaust Pipe |
3531 mm |
3736 mm |
3736 mm |
- |
Height - Top of Hood |
2580 mm |
3036 mm |
3036 mm |
- |
Height - Top of ROPS |
3593 mm |
3801 mm |
3801 mm |
- |
Hinge Pin Height at Carry |
2 ft |
2.7 ft |
2.7 ft |
- |
Hinge Pin Height at Maximum Lift |
4245 mm |
4741 mm |
4741 mm |
- |
Lift Arm Clearance at Maximum Lift |
3687 mm |
3902 mm |
3902 mm |
- |
Overall Length - Without Bucket |
7399 mm |
8597 mm |
8597 mm |
- |
Tread Width |
7.3 ft |
8.4 ft |
8.4 ft |
- |
Wheel Base |
3550 mm |
3800 mm |
3800 mm |
- |
Width over Tires (Loaded) |
9.11 ft |
11.5 ft |
11.5 ft |
- |
Rack Back - Carry Height |
50 degrees |
- |
- |
- |
Rack Back at Ground |
40 degrees |
- |
- |
- |
Rack Back - Maximum Lift |
62 degrees |
- |
- |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
- |
- |
Load Sense |
Lift/Tilt System - Pump |
- |
- |
- |
2 × 110 cc variable displacement |
Maximum Flow at 2,165 rpm |
- |
- |
- |
123 gal/min |
Relief Valve Setting - Lift/Tilt |
- |
- |
- |
4050 psi |
Lift Cylinder - Bore |
- |
- |
- |
7.5 in |
Lift Cylinder - Stroke |
- |
- |
- |
45 in |
Tilt Cylinder - Bore |
- |
- |
- |
6.7 in |
Tilt Cylinder - Stroke |
- |
- |
- |
28.4 in |
Hydraulic Cycle Times |
Rack Back |
- |
- |
- |
4.5 s |
Raise |
- |
- |
- |
9 s |
Dump |
- |
- |
- |
3.5 s |
Lower |
- |
- |
- |
5.2 s |
Lower Float Down |
- |
- |
- |
4.3 s |
Total Hydraulic Cycle Time |
- |
- |
- |
21.3 s |
Hydraulic System - Steering |
Steering System - Circuit |
- |
- |
- |
Load Sense |
Steering System - Pump |
- |
- |
- |
Piston, variable displacement |
Maximum Flow at 1,400 rpm |
- |
- |
- |
52 gal/min |
Steering Cut Off Pressure |
- |
- |
- |
4000 psi |
Total Steering Angle |
- |
- |
- |
70° |
Axles |
Front |
- |
- |
- |
Fixed |
Rear |
- |
- |
- |
Trunnion |
Oscillation Angle |
- |
- |
- |
±12.5° |
Oscillation Angle - Chain Arrangement |
- |
- |
- |
±8.5° |
Brakes |
Brakes |
- |
- |
- |
ISO 3450:2011 |
Operator's Cab |
ROPS/FOPS |
- |
- |
- |
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) |
Sound Performance - Standard |
Operator Sound Level (ISO 6396) |
- |
- |
- |
72 dB(A) |
Machine Sound Level (ISO 6395) |
- |
- |
- |
112 dB(A) |
Note |
- |
- |
- |
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
|
Sound Performance - Suppression |
Operator Sound Level (ISO 6396) |
- |
- |
- |
72 dB(A) |
Machine Sound Level (ISO 6395) |
- |
- |
- |
110 dB(A) |
Note |
- |
- |
- |
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
|
Dimensions (Approximate) - Standard Lift Linkage |
Ground to Top of ROPS |
- |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
- |
10.7 ft |
Ground to Center of Front Axle |
- |
- |
- |
3.2 ft |
Ground to Fuel Tank Clearance |
- |
- |
- |
2.3 ft |
Ground to Lower Hitch Clearance |
- |
- |
- |
1.5 ft |
Reach - Maximum Lift |
- |
- |
- |
7.1 ft |
Clearance at Maximum Lift |
- |
- |
- |
10.1 ft |
B-Pin Height - Maximum Lift |
- |
- |
- |
16.1 ft |
Maximum Overall Height - Bucket Raised |
- |
- |
- |
22.4 ft |
Rear Axle - Centerline to Bumper |
- |
- |
- |
10.3 ft |
Wheel Base |
- |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
- |
36.6 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
- |
13.8 ft |
Note |
- |
- |
- |
- All dimensions are approximate.
- Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
|
Dimensions (Approximate) - High Lift Linkage |
Ground to Top of ROPS |
- |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
- |
10.7 ft |
Ground to Center of Front Axle |
- |
- |
- |
3.2 ft |
Ground to Fuel Tank Clearance |
- |
- |
- |
2.3 ft |
Ground to Lower Hitch Clearance |
- |
- |
- |
1.5 ft |
Reach - Maximum Lift |
- |
- |
- |
7.4 ft |
Clearance at Maximum Lift |
- |
- |
- |
11.6 ft |
B-Pin Height - Maximum Lift |
- |
- |
- |
17.6 ft |
Maximum Overall Height - Bucket Raised |
- |
- |
- |
23.9 ft |
Rear Axle - Centerline to Bumper |
- |
- |
- |
10.3 ft |
Wheel Base |
- |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
- |
38 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
- |
15.3 ft |
Note |
- |
- |
- |
- All dimensions are approximate.
- Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
|
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket |
Ground to Top of ROPS |
- |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
- |
10.7 ft |
Ground to Center of Rear Axle |
- |
- |
- |
3.2 ft |
Ground to Fuel Tank Clearance |
- |
- |
- |
2.3 ft |
Ground to Lower Hitch Clearance |
- |
- |
- |
1.5 ft |
Reach at Maximum Lift |
- |
- |
- |
8 ft |
Clearance at Maximum Lift |
- |
- |
- |
10.7 ft |
B-Pin Height at Maximum Lift |
- |
- |
- |
15 ft |
Maximum Overall Height, Bucket Raised |
- |
- |
- |
20.9 ft |
Rear Axle Center Line to Bumper |
- |
- |
- |
10.3 ft |
Wheel Base |
- |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
- |
35 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
- |
12.2 ft |
Dimensions (Approximate) - Quick Coupler and Fork |
Ground to Top of ROPS |
- |
- |
- |
13.5 ft |
Ground to Top of Exhaust Stacks |
- |
- |
- |
13.3 ft |
Ground to Top of Hood |
- |
- |
- |
10.7 ft |
Ground to Center of Rear Axle |
- |
- |
- |
3.2 ft |
Ground to Fuel Tank Clearance |
- |
- |
- |
2.3 ft |
Ground to Lower Hitch Clearance |
- |
- |
- |
1.5 ft |
B-Pin Height at Maximum Lift |
- |
- |
- |
15 ft |
Rear Axle Center Line to Bumper |
- |
- |
- |
10.3 ft |
Wheel Base |
- |
- |
- |
12.5 ft |
Maximum Overall Length |
- |
- |
- |
35.4 ft |
Front Axle Centerline to Bucket Tip |
- |
- |
- |
12.6 ft |