CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    966
    View Product
    992 Wheel Loader
    View Product Remove
    988 Wheel Loader
    View Product Remove
    990 Wheel Loader
    View Product Remove

    Engine
    Engine Power @ 1,600 rpm - ISO 14396:2002 321 HP - - -
    Gross Power @ 1,600 rpm - SAE J1995:2014 325 HP - - -
    Engine Model Cat C9.3B Cat® C32B Cat® C18 ™ C27 Cat®
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 303 HP - - -
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. - - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - - -
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1255 ft-lb - - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1313 lb/ft - - -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1327 lb/ft - - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - - -
    Displacement 9.3 L 1963.5 in³ 1105 in³ 1649.5 in³
    Net Power - 814 HP - -
    Emissions - U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent
    Rated Speed - 1750 rpm 1700/min 1,800/min
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - 900 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - 937 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - 907 HP - -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - 944 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - 884 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - 921 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - 893 HP - -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - 931 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - 814 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - 823 HP - -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - 823 HP - -
    Bore - 5.7 in 5.7 in 5.4 in
    Stroke - 6.4 in 7.2 in 6 in
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - 3514 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - 3555 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - 3537 ft·lbf - -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - 3570 ft·lbf - -
    Net Power - SAE J1349:2011 - - 538 HP -
    Engine Power - ISO 14396:2002 - - 580 HP -
    Gross Power - SAE J1995:2014 - - 588 HP -
    Peak Power Speed - - 1500/rpm -
    Peak Torque - 1,200 rpm - - 2230 lb/ft 2624 lb/ft
    Torque Rise - - 58 % 18 %
    Engine Power - ISO 14396 - - - 752 HP
    Gross Power - SAE J1995 - - - 766 HP
    Net Power - SAE J1349 - Standard Ambient - - - 699 HP
    Net Power - SAE J1349 - High Ambient - - - 648 HP

    Weights
    Operating Weight 51124 lb - - -
    Note Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s - - -

    Bucket Capacities
    Bucket Range 2.8-11.9 m³ 3.75-15.5 yd³ - - -

    Transmission
    Forward - 1 4.2 mile/h 4.3 mile/h 4 mile/h 4.5 mile/h
    Forward - 2 8.4 mile/h 7.4 mile/h 7.2 mile/h 8.3 mile/h
    Forward - 3 15 mile/h 12.7 mile/h 12.7 mile/h 14.2 mile/h
    Forward - 4 24.5 mile/h - 21.6 mile/h -
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. - - Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
    Reverse - 1 4.5 mile/h 4.7 mile/h 4.7 mile/h 4.9 mile/h
    Reverse - 2 9.2 mile/h 8.1 mile/h 8.3 mile/h 9.1 mile/h
    Reverse - 3 16.5 mile/h 13.9 mile/h 14.4 mile/h 15.5 mile/h
    Reverse - 4 24.5 mile/h - - -
    Transmission Type - Cat Planetary Powershift Cat planetary powershift Cat planetary power shift
    Direct Drive - Forward 1 - Disabled Lock-up disabled Lock-up disabled
    Direct Drive - Forward 2 - 8 mile/h 7.8 mile/h 8.5 mile/h
    Direct Drive - Forward 3 - 14 mile/h 13.9 mile/h 15.2 mile/h
    Direct Drive - Reverse 1 - 5 mile/h 5 mile/h 5.4 mile/h
    Direct Drive - Reverse 2 - 8.8 mile/h 8.9 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 15.3 mile/h 15.8 mile/h 16.4 mile/h
    Direct Drive - Forward 4 - - 24.4 mile/h -

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - - -
    Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 108 - - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69 dB(A) - - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A) - - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 76 - - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A) - - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).

    Operating Specifications
    Breakout Force 38999 lb - - -
    Note (1) For a machine configuration as defined under Weight. - - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 15981 kg - - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 32727 lb - - -
    Operating Weight - 233430 lb 112574 lb 178517 lb
    Rated Payload - Standard - 25.5 ton (US) - 17.5 ton (US)
    Rated Payload - Standard (Material Handler) - 30 ton (US) - -
    Rated Payload - High Lift - 22.5 ton (US) - 17.5 ton (US)
    Rated Payload - High Lift (Material Handler) - 27 ton (US) - -
    Bucket Capacity Range - 11.5-24.5 m³ (15-32 yd³) 4.7-13 m3 (6.2-17 yd3) 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
    Cat Truck Match - Standard - 775/777 770～772 773-775
    Cat Truck Match - High Lift - 785 773～775 775-777
    Rated Payload - Quarry Face - - 12.5 t -
    Rated Payload - Loose Material - - 16 t -

    Service Refill Capacities
    Cooling System 17.4 gal (US) - 31.7 gal (US) 54.9 gal (US)
    Crankcase 6.1 gal (US) 31.7 gal (US) 15.9 gal (US) -
    DEF Tank 6.9 gal (US) - - -
    Differential - Final Drives - Front 15.1 gal (US) 96.4 gal (US) 49.1 gal (US) 71.6 gal (US)
    Differential - Final Drives - Rear 15.1 gal (US) 96.4 gal (US) 49.1 gal (US) 68.9 gal (US)
    Fuel Tank 80.1 gal (US) 385.7 gal (US) 188 gal (US) 294.3 gal (US)
    Hydraulic Tank 30.1 gal (US) - - -
    Transmission 15.5 gal (US) 51.5 gal (US) 31.7 gal (US) 29.1 gal (US)
    Cooling Systems - 59.4 gal (US) - -
    Hydraulic System Factory Fill (Implement) - 104.1 gal (US) - -
    Hydraulic Tank - Implement - 60.2 gal (US) - -
    Hydraulic Factory Fill (Steering) - 32.5 gal (US) - -
    Hydraulic Tank (Steering Tank Only) - 26.3 gal (US) - -
    Coolant (Validated by Test Cell Fill Quantities) - - 33 gal (US) -
    Diesel Exhaust Fluid Tank - - 8.7 gal (US) -
    Transmission - Validated by Test Cell Fill Quantities - - 29 gal (US) -
    Hydraulic System Factory Fill - - 125.5 gal (US) 210 gal (US)
    Hydraulic System - Tank Only - - 63.4 gal (US) -
    Engine Crankcase - - - 20 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - - 68.9 gal (US)
    Hydraulic Tank - Steering and Braking - - - 34.9 gal (US)
    Note - - - All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l

    Hydraulic System
    Implement System - Maximum Operating Pressure 4496 psi - - -
    Implement System - Maximum Pump Output at 2,250 rpm 99 gal/min - - -
    Hydraulic Cycle Time - Total 10.1 seconds - - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. - - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.1 ft - - -
    Centerline of Rear Axle to Hitch 5.1 ft - - -
    Ground Clearance 1.4 ft - - -
    Height - Top of Exhaust Pipe 11.8 ft - - -
    Height - Top of Hood 9.5 ft - - -
    Height - Top of ROPS 11.1 ft - - -
    Hinge Pin Height at Carry 2.6 ft - - -
    Hinge Pin Height at Maximum Lift 15.9 ft - - -
    Lift Arm Clearance at Maximum Lift 13.8 ft - - -
    Overall Length - Without Bucket 26.6 ft - - -
    Tread Width 7.3 ft - - -
    Wheel Base 11.8 ft - - -
    Rack Back - Carry Height 49 degrees - - -
    Rack Back - Maximum Lift 71 degrees - - -
    Width over Tires (Loaded) 9.11 ft - - -
    Rack Back at Ground 37 degrees - - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight 7.7 ft - - -
    Centerline of Rear Axle to Hitch 5.1 ft - - -
    Ground Clearance 424 mm - - -
    Height - Top of Exhaust Pipe 3531 mm - - -
    Height - Top of Hood 2850 mm - - -
    Height - Top of ROPS 3593 mm - - -
    Hinge Pin Height at Carry 2 ft - - -
    Hinge Pin Height at Maximum Lift 4245 mm - - -
    Lift Arm Clearance at Maximum Lift 3687 mm - - -
    Overall Length - Without Bucket 7399 mm - - -
    Tread Width 7.3 ft - - -
    Wheel Base 3550 mm - - -
    Rack Back - Carry Height 50 degrees - - -
    Width over Tires (Loaded) 9.11 ft - - -
    Rack Back - Maximum Lift 62 degrees - - -
    Rack Back at Ground 39 degrees - - -

    Buckets
    Bucket Capacities - 11.5-24.5 m³ (15-32 yd³) 4.7-13 m3 (6.2-17 yd3) 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control EH- Positive Flow Control, Flow Sharing Positive flow control
    Lift/Tilt System - Pump - Variable Displacement Piston - -
    Maximum Flow at 2,165 rpm - 250 gal/min - -
    Relief Valve Setting - Lift/Tilt - 5000 psi 4757 psi 4786 psi
    Lift Cylinder - Bore - 9.3 in - -
    Lift Cylinder - Stroke - 63.5 in - -
    Tilt Cylinder - Bore - 11.5 in - -
    Tilt Cylinder - Stroke - 41.5 in - -
    Lift/Tilt System - - Variable displacement piston Variable displacement piston
    Maximum Flow at 1,400-1,860 rpm - - 153 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - - 210 mm × 1050 mm (8.7 in × 41.3 in) 235 mm × 1287 mm (9.3 in × 50.7 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 269 mm × 685 mm (8.7 in × 27 in) 292.1 mm × 820 mm (11.5 in × 32.3 in)
    Pilot System - - Variable displacement piston Open loop and pressure reducing
    Relief Valve Setting - Main - - 551 psi 507 psi
    Maximum Flow at 1,800 rpm (1) - - - 240 gal/min

    Hydraulic Cycle Times
    Rack Back - 2.3 s - 4.3 s
    Rack Back - High Lift - 2.3 s - -
    Raise - 9 s - 8.2 s
    Raise - High Lift - 9 s - -
    Dump - 2.6 s - 2.9 s
    Dump - High Lift - 2.6 s - -
    Float Down - 3.2 s - -
    Float Down - High Lift - 3.2 s - -
    Total Hydraulic Cycle Time - 17.1 s - -
    Lower - - - 3.7 s
    Lower Float Down - - - 3.6 s
    Total Hydraulic Cycle Time - Empty Bucket - - - 13.8 s

    Axles
    Front - Fixed Fixed Fixed
    Rear - Trunnion Trunnion Trunnion
    Oscillation Angle - ±9° 13 ° 8.5°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011 ISO 3450: 2011

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Piston, Variable Displacement Piston, variable displacement Piston, variable displacement
    Maximum Flow at 1,400-1,850 rpm - 70 gal/min - -
    Steering Cut Off Pressure - 4500 psi - -
    Total Steering Angle - 80° 86 ° 70°
    Steering Cycle Times - Low Idle - 4.9 s 5.6 s -
    Steering Cycle Times - High Idle - 3.1 s 3.4 s -
    Maximum Flow - - 71.3 gal/min -
    Relief Valve Setting - Steering - - 4351 psi 5004 psi
    Maximum Flow at 1,400 rpm - - - 96.2 gal/min

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F - -
    Ambient Capability, Hydraulically Driven Demand Fan - High - 131 °F - -

    Sound Performance - Standard
    Note - Machine Sound Level (ISO 6396:2008) - 116 dB(A) - -
    Operator Sound Level (ISO 6396:2008) - - - 65.5 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 115 dB(A)

    Sound Performance - Suppression
    Note - Machine Sound Level (ISO 6396:2008) - 113 dB(A) - -
    Operator Sound Level (ISO 6396:2008) - - - 65.5 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 113 dB(A)

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - 17 ft - -
    Ground to Top of ROPS - 18.3 ft - -
    Ground to Top of Hood - 13.1 ft - -
    Ground to Center of Front Axle - 4.3 ft - -
    Ground to Bumper Clearance - 3.8 ft - -
    Ground to Lower Hitch Clearance - 2.2 ft - -
    Reach - Maximum Lift - 8.2 ft - -
    Clearance at Maximum Lift - 15.2 ft - -
    B-Pin Height - Maximum Lift - 22.8 ft - -
    Maximum Overall Height - Bucket Raised - 30.8 ft - -
    Rear Axle - Centerline to Bumper - 13.5 ft - -
    Tread Width - 10.83 ft - -
    Rack Back Angle - Maximum Lift - 56.9 degrees - -
    Dump Angle at Maximum Lift - -49.5 degrees - -
    Rack Back Angle - Ground Level - 40.2 degrees - -
    Width - Over Tires - With Bulge - 14.74 ft - -
    Rack Back Angle - Carry - 48.9 degrees - -
    Wheel Base - 19.3 ft - -
    Maximum Overall Length - 50.8 ft - -
    Front Axle Centerline to Bucket Tip - 18 ft - -

    Dimensions - High Lift - Approximate
    Tread Width - 10.83 ft - -
    Rack Back Angle - Ground Level - 42.5 degrees - -
    Dump Angle at Maximum Lift - -48.1 degrees - -
    Rack Back Angle - Maximum Lift - 56.2 degrees - -
    Width - Over Tires - With Bulge - 14.75 ft - -
    Rack Back Angle - Carry - 51.6 degrees - -
    Ground to Top of Exhaust Stacks - 17 ft - -
    Ground to Top of ROPS - 18.3 ft - -
    Ground to Top of Hood - 13.1 ft - -
    Ground to Center of Front Axle - 4.3 ft - -
    Ground to Bumper Clearance - 3.8 ft - -
    Ground to Lower Hitch Clearance - 2.2 ft - -
    Reach - Maximum Lift - 7.6 ft - -
    Clearance at Maximum Lift - 17.2 ft - -
    B-Pin Height - Maximum Lift - 24.5 ft - -
    Maximum Overall Height - Bucket Raised - 32 ft - -
    Rear Axle - Centerline to Bumper - 13.5 ft - -
    Wheel Base - 19.3 ft - -
    Maximum Overall Length - 51.6 ft - -
    Front Axle Centerline to Bucket Tip - 18.8 ft - -

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - - 4.5 s -
    Raise - - 8 s -
    Dump - - 2.2 s -
    Lower Float Down - - 3.5 s -
    Total Hydraulic Cycle Time - Empty Bucket - - 18.2 s -

    Operator's Cab
    ROPS/FOPS - - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - - 111 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - - 112 dB(A) -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - 13.8 ft -
    Ground to Top of Exhaust Stacks - - 14.8 ft -
    Ground to Top of Hood - - 10.9 ft -
    Rear Axle - Centerline to Bumper - - 10.5 ft -
    Front Axle Centerline to Bucket Tip - - 14 ft -
    Wheel Base - - 14.9 ft -
    Maximum Overall Length - - 39.3 ft -
    Ground to Lower Hitch Clearance - - 1.9 ft -
    Clearance at Maximum Lift - - 11.9 ft -
    B-Pin Height - Maximum Lift - - 18 ft -
    Maximum Overall Height - Bucket Raised - - 24.5 ft -
    Reach - Maximum Lift - - 6.5 ft -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - 13.8 ft -
    Ground to Top of Exhaust Stacks - - 14.8 ft -
    Ground to Top of Hood - - 10.9 ft -
    Rear Axle - Centerline to Bumper - - 10.5 ft -
    Front Axle Centerline to Bucket Tip - - 15.3 ft -
    Wheel Base - - 14.9 ft -
    Maximum Overall Length - - 40.7 ft -
    Ground to Lower Hitch Clearance - - 1.9 ft -
    Clearance at Maximum Lift - - 13.3 ft -
    B-Pin Height - Maximum Lift - - 19.3 ft -
    Maximum Overall Height - Bucket Raised - - 25.8 ft -
    Reach - Maximum Lift - - 6.8 ft -
    Add a Similar Product: