CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    966
    View Product
    988 Wheel Loader
    View Product Remove
    990 Wheel Loader
    View Product Remove

    Engine
    Engine Power @ 1,600 rpm - ISO 14396:2002 321 HP - -
    Gross Power @ 1,600 rpm - SAE J1995:2014 325 HP - -
    Engine Model Cat C9.3B Cat® C18 ™ C27 Cat®
    Net Power @ 1,600 rpm - ISO 9249:2007, SAE J1349:2011 303 HP - -
    Note (1) Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. - -
    Net Torque @ 1,200 rpm - ISO 9249:2007, SAE J1349:2011 1255 ft-lb - -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 1313 lb/ft - -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 1327 lb/ft - -
    Note (3) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h - -
    Displacement 9.3 L 1105 in³ 1649.5 in³
    Net Power - SAE J1349:2011 - 538 HP -
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Rated Speed - 1700/min 1,800/min
    Peak Power Speed - 1500/rpm -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent
    Bore - 5.7 in 5.4 in
    Stroke - 7.2 in 6 in
    Peak Torque - 1,200 rpm - 2230 lb/ft 2624 lb/ft
    Torque Rise - 58 % 18 %
    Engine Power - ISO 14396 - - 752 HP
    Gross Power - SAE J1995 - - 766 HP
    Net Power - SAE J1349 - Standard Ambient - - 699 HP
    Net Power - SAE J1349 - High Ambient - - 648 HP

    Weights
    Operating Weight 51124 lb - -
    Note Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s - -

    Bucket Capacities
    Bucket Range 2.8-11.9 m³ 3.75-15.5 yd³ - -

    Transmission
    Forward - 1 4.2 mile/h 4 mile/h 4.5 mile/h
    Forward - 2 8.4 mile/h 7.2 mile/h 8.3 mile/h
    Forward - 3 15 mile/h 12.7 mile/h 14.2 mile/h
    Forward - 4 24.5 mile/h 21.6 mile/h -
    Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. - Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
    Reverse - 1 4.5 mile/h 4.7 mile/h 4.9 mile/h
    Reverse - 2 9.2 mile/h 8.3 mile/h 9.1 mile/h
    Reverse - 3 16.5 mile/h 14.4 mile/h 15.5 mile/h
    Reverse - 4 24.5 mile/h - -
    Transmission Type - Cat planetary powershift Cat planetary power shift
    Direct Drive - Forward 1 - Lock-up disabled Lock-up disabled
    Direct Drive - Forward 2 - 7.8 mile/h 8.5 mile/h
    Direct Drive - Forward 3 - 13.9 mile/h 15.2 mile/h
    Direct Drive - Forward 4 - 24.4 mile/h -
    Direct Drive - Reverse 1 - 5 mile/h 5.4 mile/h
    Direct Drive - Reverse 2 - 8.9 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 15.8 mile/h 16.4 mile/h

    Sound
    Note (1) ** For machines in European Union countries and in countries that adopt the EU Directives. - -
    Note (2) ***European Union Directive 2000/14/EC as amended by 2005/88/EC. - -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* 108 - -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 69 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 109 dB(A) - -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 76 - -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 70 dB(A) - -
    With Cooling Fan Speed at Maximum Value - Note Distance of 15 m (49.2 ft), moving forward in second gear ratio. - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).

    Operating Specifications
    Breakout Force 38999 lb - -
    Note (1) For a machine configuration as defined under Weight. - -
    Note (2) Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. - -
    Static Tipping Load - Full 40° Turn - No Tire Deflection 15981 kg - -
    Static Tipping Load - Full 40° Turn - With Tire Deflection 32727 lb - -
    Operating Weight - 112574 lb 178517 lb
    Rated Payload - Quarry Face - 12.5 t -
    Rated Payload - Loose Material - 16 t -
    Bucket Capacity Range - 4.7-13 m3 (6.2-17 yd3) 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
    Cat Truck Match - Standard - 770～772 773-775
    Cat Truck Match - High Lift - 773～775 775-777
    Rated Payload - Standard - - 17.5 ton (US)
    Rated Payload - High Lift - - 17.5 ton (US)

    Service Refill Capacities
    Cooling System 17.4 gal (US) 31.7 gal (US) 54.9 gal (US)
    Crankcase 6.1 gal (US) 15.9 gal (US) -
    DEF Tank 6.9 gal (US) - -
    Differential - Final Drives - Front 15.1 gal (US) 49.1 gal (US) 71.6 gal (US)
    Differential - Final Drives - Rear 15.1 gal (US) 49.1 gal (US) 68.9 gal (US)
    Fuel Tank 80.1 gal (US) 188 gal (US) 294.3 gal (US)
    Hydraulic Tank 30.1 gal (US) - -
    Transmission 15.5 gal (US) 31.7 gal (US) 29.1 gal (US)
    Coolant (Validated by Test Cell Fill Quantities) - 33 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) -
    Transmission - Validated by Test Cell Fill Quantities - 29 gal (US) -
    Hydraulic System Factory Fill - 125.5 gal (US) 210 gal (US)
    Hydraulic System - Tank Only - 63.4 gal (US) -
    Engine Crankcase - - 20 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 68.9 gal (US)
    Hydraulic Tank - Steering and Braking - - 34.9 gal (US)
    Note - - All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or l

    Hydraulic System
    Implement System - Maximum Operating Pressure 4496 psi - -
    Implement System - Maximum Pump Output at 2,250 rpm 99 gal/min - -
    Hydraulic Cycle Time - Total 10.1 seconds - -

    Dimensions
    Note All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. - -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight 8.1 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 1.4 ft - -
    Height - Top of Exhaust Pipe 11.8 ft - -
    Height - Top of Hood 9.5 ft - -
    Height - Top of ROPS 11.1 ft - -
    Hinge Pin Height at Carry 2.6 ft - -
    Hinge Pin Height at Maximum Lift 15.9 ft - -
    Lift Arm Clearance at Maximum Lift 13.8 ft - -
    Overall Length - Without Bucket 26.6 ft - -
    Tread Width 7.3 ft - -
    Wheel Base 11.8 ft - -
    Rack Back - Carry Height 49 degrees - -
    Rack Back - Maximum Lift 71 degrees - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back at Ground 37 degrees - -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Edge of Counterweight 7.7 ft - -
    Centerline of Rear Axle to Hitch 5.1 ft - -
    Ground Clearance 424 mm - -
    Height - Top of Exhaust Pipe 3531 mm - -
    Height - Top of Hood 2850 mm - -
    Height - Top of ROPS 3593 mm - -
    Hinge Pin Height at Carry 2 ft - -
    Hinge Pin Height at Maximum Lift 4245 mm - -
    Lift Arm Clearance at Maximum Lift 3687 mm - -
    Overall Length - Without Bucket 7399 mm - -
    Tread Width 7.3 ft - -
    Wheel Base 3550 mm - -
    Rack Back - Carry Height 50 degrees - -
    Width over Tires (Loaded) 9.11 ft - -
    Rack Back - Maximum Lift 62 degrees - -
    Rack Back at Ground 39 degrees - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH- Positive Flow Control, Flow Sharing Positive flow control
    Lift/Tilt System - Variable displacement piston Variable displacement piston
    Maximum Flow at 1,400-1,860 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4757 psi 4786 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 210 mm × 1050 mm (8.7 in × 41.3 in) 235 mm × 1287 mm (9.3 in × 50.7 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - 269 mm × 685 mm (8.7 in × 27 in) 292.1 mm × 820 mm (11.5 in × 32.3 in)
    Pilot System - Variable displacement piston Open loop and pressure reducing
    Relief Valve Setting - Main - 551 psi 507 psi
    Maximum Flow at 1,800 rpm (1) - - 240 gal/min

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - 4.5 s -
    Raise - 8 s -
    Dump - 2.2 s -
    Lower Float Down - 3.5 s -
    Total Hydraulic Cycle Time - Empty Bucket - 18.2 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Piston, variable displacement Piston, variable displacement
    Maximum Flow - 71.3 gal/min -
    Relief Valve Setting - Steering - 4351 psi 5004 psi
    Total Steering Angle - 86 ° 70°
    Steering Cycle Times - High Idle - 3.4 s -
    Steering Cycle Times - Low Idle - 5.6 s -
    Maximum Flow at 1,400 rpm - - 96.2 gal/min

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - 13 ° 8.5°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450: 2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 111 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 73 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 112 dB(A) -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -

    Buckets
    Bucket Capacities - 4.7-13 m3 (6.2-17 yd3) 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)

    Hydraulic Cycle Times
    Rack Back - - 4.3 s
    Raise - - 8.2 s
    Dump - - 2.9 s
    Lower - - 3.7 s
    Lower Float Down - - 3.6 s
    Total Hydraulic Cycle Time - Empty Bucket - - 13.8 s

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - - 65.5 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 115 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - - 65.5 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 113 dB(A)
    Add a Similar Product: