CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    903D Compact Wheel Loader
    View Product
    988 XE Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 42 HP - -
    Engine Model Cat C2.4* Cat® C18 ™ Cat® 3516E
    Gross Power 42 HP - -
    Net Power - 2,200 rpm - SAE J1349 R-ing 40 HP - -
    Net Power - 2,200 rpm - ISO 9249 R-ing 40 HP - -
    Bore 3.4 in 5.7 in 6.7 in
    Stroke 4 in 7.2 in 8.5 in
    Displacement 147 in² 1105 in³ 4766 in³
    Note *Engine meets U.S. EPA Tier 4 Final emission standards. - -
    Net Power - SAE J1349 - 538 HP -
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Rated Speed - 1,700 rpm -
    Peak Power Speed - 1,500 rpm -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Peak Torque - 1,200 rpm - SAE J1995 - 2230 ft·lbf 8549 lb/ft
    Torque Rise - 58% 39%
    Engine Power - ISO 14396 - - 1847 HP
    Gross Power - SAE J1995 - - 1870 HP
    Net Power - SAE J1349 - Standard Ambient - - 1739 HP
    Net Power - SAE J1349 - High Ambient - - 1696 HP
    Note (1) - - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Note (3) - - The gross power advertised is with the fan at maximum speed.

    Weights
    Operating Weight 9414 lb - -

    Buckets
    Bucket Capacities 0.6-1.0 m3 (0.8-1.3 yd3) 4.7-13 m3 (6.2-17 yd3) -
    Bucket Capacities - General Purpose 0.6 m3 (0.8 yd3) - -
    Bucket Capacities - Light Material 1.0 m3 (1.3 yd3) - -

    Transmission
    Travel Speed 12.4 mile/h - -
    Transmission Type - Cat switched reluctance electric drive Cat Planetary Power Shift
    Forward 1 (virtual) - 4.3 mile/h -
    Forward 2 (virtual) - 7 mile/h -
    Forward 3 (virtual) - 13.8 mile/h -
    Forward 4 (virtual) - 20 mile/h -
    Reverse 1 (virtual) - 4.3 mile/h -
    Reverse 2 (virtual) - 7 mile/h -
    Reverse 3 (virtual) - 17.5 mile/h -
    Forward - 1 - - 4.6 mile/h
    Forward - 2 - - 8 mile/h
    Forward - 3 - - 13.6 mile/h
    Reverse - 1 - - 5 mile/h
    Reverse - 2 - - 8.8 mile/h
    Reverse - 3 - - 14.9 mile/h
    Direct Drive - Forward 1 - - Lock-up disables
    Direct Drive - Forward 2 - - 8.7 mile/h
    Direct Drive - Forward 3 - - 15.2 mile/h
    Direct Drive - Reverse 1 - - Lock-up disables
    Direct Drive - Reverse 2 - - 9.6 mile/h
    Direct Drive - Reverse 3 - - 16.8 mile/h
    Note - - Travel speeds based on 58/85-57 tires.

    Hydraulic System
    Main Relief 3481 psi - -
    3rd Auxiliary Flow 14 gal/min - -
    Hydraulic Cycle Time - Lower, Float 2.4 s - -

    Loader Hydraulic System
    Hydraulic Cycle Time - Lift 4.4 s - -
    Hydraulic Cycle Time - Dump 0.7 s - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 Level I - -

    Service Refill Capacities
    Cooling System 3 gal (US) - -
    Fuel Tank 11.4 gal (US) 147 gal (US) -
    Hydraulic System 6.3 gal (US) - -
    Engine Oil 2.4 gal (US) - -
    Cooling System - Jacket Water - 30 gal (US) -
    Cooling Systems - Power Train - 8 gal (US) -
    Engine Crankcase - 16 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) -
    Transmission - 16 gal (US) -
    Differential - Final Drives - Front - 49 gal (US) -
    Differential - Final Drives - Rear - 49 gal (US) -
    Hydraulic System - Implement/Steering - 126 gal (US) -
    Note - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati -

    Dimensions (Approximate) - Standard Lift
    Cab Height 8.25 ft - -
    Ground Clearance 10 in - -
    Wheel Base 6.42 ft 14.9 ft -
    Overall Length - With Bucket* 15.75 ft - -
    Reach at Maximum Dump Height* 2.33 ft - -
    Dig Depth 6 in - -
    Maximum Dump Height* 7.5 ft - -
    Load Over Height 9.17 ft - -
    Hinge Pin at Maximum Height 10.08 ft - -
    Departure Angle - Degrees 30° - -
    Overall Length - With Forks 17.08 ft - -
    Reach - Ground Level 2.67 ft - -
    Maximum Reach 4.5 ft - -
    Fork Depth Above Ground 2 in - -
    Fork Height at Maximum Reach 4.67 ft - -
    Maximum Fork Height 9.83 ft - -
    Fork Reach at Maximum Height 2 ft - -
    Turning Radius - Over Bucket* 13.17 ft - -
    Turning Radius - Inside Tire** 5.92 ft - -
    Width - Over Bucket* 5.83 ft - -
    Tire Gauge 4.33 ft - -
    Machine Width** 5.58 ft - -
    Articulation Angle 40° - -
    Steering Angle 80° - -
    Dump Angle at Maximum Height 40° - -
    Note (1) *Vary with bucket size. - -
    Note (2) **Vary with tire size. - -
    Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - -
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions (Approximate) - High Lift
    Cab Height 8.25 ft - -
    Ground Clearance 10 in - -
    Wheel Base 6.42 ft 14.9 ft -
    Overall Length - With Bucket* 16.17 ft - -
    Reach at Maximum Dump Height* 2.42 ft - -
    Dig Depth 8 in - -
    Maximum Dump Height* 8 ft - -
    Load Over Height 9.67 ft - -
    Hinge Pin at Maximum Height 10.58 ft - -
    Departure Angle - Degrees 30° - -
    Overall Length - With Forks 17.58 ft - -
    Reach - Ground Level 3.25 ft - -
    Maximum Reach 4.92 ft - -
    Fork Depth Above Ground 2 in - -
    Fork Height at Maximum Reach 4.67 ft - -
    Maximum Fork Height 10.33 ft - -
    Fork Reach at Maximum Height 2 ft - -
    Turning Radius - Over Bucket* 13.42 ft - -
    Turning Radius - Inside Tire** 5.92 ft - -
    Width - Over Bucket* 5.83 ft - -
    Tire Gauge 4.33 ft - -
    Machine Width** 5.58 ft - -
    Articulation Angle 40° - -
    Steering Angle 80° - -
    Dump Angle at Maximum Height 40° - -
    Note (1) *Vary with bucket size. - -
    Note (2) **Vary with tire size. - -
    Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - -
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Operating Specifications - Standard Lift
    Tire Size 33 × 15.5-16.5, 12 PR - -
    Rated Bucket Capacity 0.8 yd³ - -
    Breakout Force 6160 lbf - -
    Operating Weight 9414 lb - -
    Rated Operating Load at Full Turn - Bucket*** 2701 lb - -
    Straight Tipping Load - Bucket*** 6415 lb - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5401 lb - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5512 lb - -
    Rack Back - Transport Position 51° - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3366 lb - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2524 lb - -
    Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - -
    Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - -
    Note (3) ***Manual quick coupler, precleaner hood. - -
    Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - -

    Operating Specifications - High Lift
    Tire Size 33 × 15.5-16.5, 12 PR - -
    Rated Bucket Capacity 0.8 yd³ - -
    Breakout Force 6204 lbf - -
    Operating Weight 9462 lb - -
    Rated Operating Load at Full Turn - Bucket*** 2502 lb - -
    Straight Tipping Load - Bucket*** 5975 lb - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5004 lb - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5115 lb - -
    Rack Back - Transport Position 51° - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3148 lb - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2361 lb - -
    Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - -
    Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - -
    Note (3) ***Manual quick coupler, precleaner hood. - -
    Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - -

    Maximum Material Densities - General Purpose
    Bucket Type General Purpose - -
    Rated Capacity 0.8 yd³ - -
    Dump Height 90 in - -
    Maximum Material Density 3169 lb/yd³ - -
    Bucket Width 70 in - -
    Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - -

    Maximum Material Densities - Light Material
    Bucket Type Light Material - -
    Rated Capacity 1.3 yd³ - -
    Dump Height 85 in - -
    Maximum Material Density 1989 lb/yd³ - -
    Bucket Width 74 in - -
    Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - -

    Sustainability
    Recyclability 97% 96% -

    Operating Specifications
    Operating Weight - 116362 lb -
    Operating Weight - Standard - 116362 lb 543772 lb
    Operating Weight - High Lift - 119618 lb 547675 lb
    Rated Payload - Standard (Quarry Face) - 12.5 ton (US) -
    Rated Payload - Loose Material (Standard) - 16 ton (US) -
    Bucket Capacity Range - 4.7-13 m3 (6.2-17 yd3) 17.2-43.6 m3 (22.3-57 yd3)
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.
    Cat Truck Match - Standard - - 785/789
    Cat Truck Match - High Lift - - 789/793/794

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH-Positive Flow Control, Flow Sharing Positive Flow Control
    Lift/Tilt System - Pump - Variable displacement piston Variable Displacement Piston
    Maximum Flow at 1,400-1,600 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4757 psi 5004 psi
    Lift Cylinder - Bore - 8.7 in -
    Lift Cylinder - Stroke - 41.3 in -
    Tilt Cylinder - Bore - 8.7 in -
    Tilt Cylinder - Stroke - 27 in -
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - - Open Loop and Pressure Reducing

    Hydraulic Cycle Times
    Rack Back - 4.5 s 4.9 s
    Raise - 8 s 12.6 s
    Dump - 2.2 s 3.1 s
    Lower Float Down - 3.5 s 4.2 s
    Total Hydraulic Cycle Time - 18.2 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, Load Sensing
    Steering System - Pump - Piston, variable displacement Piston, Variable Displacement
    Maximum Flow at 1,400-1,600 rpm - 71.3 gal/min -
    Steering Cut Off Pressure - 4351 psi -
    Total Steering Angle - 86° 80 degrees
    Steering Cycle Times - High Idle - 3.4 s 4.3 s
    Steering Cycle Times - Low Idle - 5.6 s 7.6 s

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - 13° 9°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 109 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 110 dB(A) -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 13.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Fork Tip - 16.5 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 41.9 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Fork Height with Level Arms - 8.1 ft -
    Fork Top Clamp Opening - 13.1 ft -
    Fork Height at Maximum Lift - 17.2 ft -
    Hinge Pin Height at Maximum Lift - 16.1 ft -
    Dump Angle at Maximum Lift - -39.4 ° -

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - - 109.4 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A)
    Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A)
    Note - - The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift - - 28.8 ft
    Clearance at Maximum Lift - - 19.8 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 21.9 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 39.3 ft
    Maximum Overall Length - - 64.6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees
    Rack Back Angle - Carry - - 47.7 degrees
    Rack Back Angle - Ground Level - - 39.7 degrees
    Reach - Maximum Lift - - 9.6 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift - - 31.6 ft
    Clearance at Maximum Lift - - 22.6 ft
    Dump Angle at Maximum Lift - - –50.0 degrees
    Front Axle Centerline to Bucket Tip - - 24.2 ft
    Ground to Bumper Clearance - - 4.4 ft
    Ground to Center of Axles - - 6 ft
    Ground to Lower Hitch Clearance - - 2.9 ft
    Ground to Top of Exhaust Stacks - - 23.2 ft
    Ground to Top of Hood - - 18.6 ft
    Ground to Top of ROPS - - 23.4 ft
    Maximum Overall Height - Bucket Raised - - 42.1 ft
    Maximum Overall Length - - 66.9 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees
    Rack Back Angle - Carry - - 53.5 degrees
    Rack Back Angle - Ground Level - - 45 degrees
    Reach - Maximum Lift - - 9.4 ft
    Rear Axle - Centerline to Bumper - - 20.4 ft
    Tread Width - - 14.1 ft
    Wheel Base - - 22.3 ft
    Width - Over Tires - With Bulge - - 18.8 ft
    Add a Similar Product: