CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    903D Compact Wheel Loader
    View Product
    988 GC Wheel Loader
    View Product Remove
    980
    View Product Remove

    Engine
    Maximum Gross Power 42 HP - -
    Engine Model Cat C2.4* Cat® C15 Cat C13
    Gross Power 42 HP - -
    Net Power - 2,200 rpm - SAE J1349 R-ing 40 HP - -
    Net Power - 2,200 rpm - ISO 9249 R-ing 40 HP - -
    Bore 3.4 in 5.4 in -
    Stroke 4 in 6.75 in -
    Displacement 147 in² 927 in³ 12.5 L
    Note *Engine meets U.S. EPA Tier 4 Final emission standards. - -
    Rated Speed - 2000 -
    Peak Power Speed - 1600 -
    Engine Power - ISO 14396 - 449 HP -
    Gross Power - SAE J1995 - 456 HP -
    Net Power - SAE J1349 - 373 HP -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 -
    Peak Torque - 1,200 rpm - SAE J1995 - 1778 ft·lbf -
    Torque Rise - 16% -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - - 393 HP
    Note (1) - - Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - - 1627 lb/ft
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - - 1612 lb/ft
    Gross Power @ 1,700 rpm – SAE J1995:2014 - - 425 HP
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - - 1539 lb/ft
    Engine Power @ 1,700 rpm – ISO 14396:2002 - - 429 HP
    Note (3) - - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h

    Weights
    Operating Weight 9414 lb - 66877 lb
    Note - - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

    Buckets
    Bucket Capacities 0.6-1.0 m3 (0.8-1.3 yd3) 6.4-7.6 m3 (8.3-10 yd3) -
    Bucket Capacities - General Purpose 0.6 m3 (0.8 yd3) - -
    Bucket Capacities - Light Material 1.0 m3 (1.3 yd3) - -

    Transmission
    Travel Speed 12.4 mile/h - -
    Transmission Type - Cat planetary power shift -
    Forward - 1 - 5 mile/h 4.3 mile/h
    Forward - 2 - 8 mile/h 8.3 mile/h
    Reverse - 1 - 5 mile/h 4.8 mile/h
    Reverse - 2 - 8 mile/h 9.4 mile/h
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 8 mile/h -
    Direct Drive - Forward 3 - 14 mile/h -
    Direct Drive - Forward 4 - 24 mile/h -
    Direct Drive - Reverse 1 - Lock-up disabled -
    Direct Drive - Reverse 2 - 9 mile/h -
    Direct Drive - Reverse 3 - 16 mile/h -
    Direct Drive - Reverse 4 - 25.4 mile/h -
    Forward - 3 - - 14.6 mile/h
    Forward - 4 - - 24.5 mile/h
    Note - - Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.
    Reverse - 3 - - 16.7 mile/h
    Reverse - 4 - - 24.5 mile/h

    Hydraulic System
    Main Relief 3481 psi - -
    3rd Auxiliary Flow 14 gal/min - -
    Hydraulic Cycle Time - Lower, Float 2.4 s - -
    Implement System - Maximum Operating Pressure - - 4975 psi
    Implement System - Maximum Pump Output at 2,250 rpm - - 119 gal/min

    Loader Hydraulic System
    Hydraulic Cycle Time - Lift 4.4 s - -
    Hydraulic Cycle Time - Dump 0.7 s - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 Level I - -

    Service Refill Capacities
    Cooling System 3 gal (US) 27 gal (US) 13.7 gal (US)
    Fuel Tank 11.4 gal (US) 141 gal (US) 112.5 gal (US)
    Hydraulic System 6.3 gal (US) - -
    Engine Oil 2.4 gal (US) - -
    Engine Crankcase - 9 gal (US) -
    Diesel Exhaust Fluid Tank - 5.5 gal (US) -
    Transmission - 20 gal (US) 20.3 gal (US)
    Differential - Final Drives - Front - 49 gal (US) 22.2 gal (US)
    Differential - Final Drives - Rear - 45 gal (US) 22.4 gal (US)
    Note - Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a -
    Crankcase - - 9.8 gal (US)
    DEF Tank - - 5.5 gal (US)
    Hydraulic Tank - - 40.4 gal (US)

    Dimensions (Approximate) - Standard Lift
    Cab Height 8.25 ft - -
    Ground Clearance 10 in - -
    Wheel Base 6.42 ft - -
    Overall Length - With Bucket* 15.75 ft - -
    Reach at Maximum Dump Height* 2.33 ft - -
    Dig Depth 6 in - -
    Maximum Dump Height* 7.5 ft - -
    Load Over Height 9.17 ft - -
    Hinge Pin at Maximum Height 10.08 ft - -
    Departure Angle - Degrees 30° - -
    Overall Length - With Forks 17.08 ft - -
    Reach - Ground Level 2.67 ft - -
    Maximum Reach 4.5 ft - -
    Fork Depth Above Ground 2 in - -
    Fork Height at Maximum Reach 4.67 ft - -
    Maximum Fork Height 9.83 ft - -
    Fork Reach at Maximum Height 2 ft - -
    Turning Radius - Over Bucket* 13.17 ft - -
    Turning Radius - Inside Tire** 5.92 ft - -
    Width - Over Bucket* 5.83 ft - -
    Tire Gauge 4.33 ft - -
    Machine Width** 5.58 ft - -
    Articulation Angle 40° - -
    Steering Angle 80° - -
    Dump Angle at Maximum Height 40° - -
    Note (1) *Vary with bucket size. - -
    Note (2) **Vary with tire size. - -
    Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - -

    Dimensions (Approximate) - High Lift
    Cab Height 8.25 ft - -
    Ground Clearance 10 in - -
    Wheel Base 6.42 ft 12.5 ft -
    Overall Length - With Bucket* 16.17 ft - -
    Reach at Maximum Dump Height* 2.42 ft - -
    Dig Depth 8 in - -
    Maximum Dump Height* 8 ft - -
    Load Over Height 9.67 ft - -
    Hinge Pin at Maximum Height 10.58 ft - -
    Departure Angle - Degrees 30° - -
    Overall Length - With Forks 17.58 ft - -
    Reach - Ground Level 3.25 ft - -
    Maximum Reach 4.92 ft - -
    Fork Depth Above Ground 2 in - -
    Fork Height at Maximum Reach 4.67 ft - -
    Maximum Fork Height 10.33 ft - -
    Fork Reach at Maximum Height 2 ft - -
    Turning Radius - Over Bucket* 13.42 ft - -
    Turning Radius - Inside Tire** 5.92 ft - -
    Width - Over Bucket* 5.83 ft - -
    Tire Gauge 4.33 ft - -
    Machine Width** 5.58 ft - -
    Articulation Angle 40° - -
    Steering Angle 80° - -
    Dump Angle at Maximum Height 40° - -
    Note (1) *Vary with bucket size. - -
    Note (2) **Vary with tire size. - -
    Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - -
    Ground to Top of ROPS - 13.5 ft -
    Ground to Top of Exhaust Stacks - 13.3 ft -
    Ground to Top of Hood - 10.7 ft -
    Rear Axle - Centerline to Bumper - 10.3 ft -
    Front Axle Centerline to Bucket Tip - 15.7 ft -
    Maximum Overall Length - 39.5 ft -
    Ground to Lower Hitch Clearance - 1.5 ft -
    Clearance at Maximum Lift - 12 ft -
    B-Pin Height - Maximum Lift - 18.7 ft -
    Maximum Overall Height - Bucket Raised - 25 ft -
    Reach - Maximum Lift - 7.7 ft -
    Note - Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires. -

    Operating Specifications - Standard Lift
    Tire Size 33 × 15.5-16.5, 12 PR - -
    Rated Bucket Capacity 0.8 yd³ - -
    Breakout Force 6160 lbf - -
    Operating Weight 9414 lb - -
    Rated Operating Load at Full Turn - Bucket*** 2701 lb - -
    Straight Tipping Load - Bucket*** 6415 lb - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5401 lb - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5512 lb - -
    Rack Back - Transport Position 51° - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3366 lb - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2524 lb - -
    Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - -
    Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - -
    Note (3) ***Manual quick coupler, precleaner hood. - -
    Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - -

    Operating Specifications - High Lift
    Tire Size 33 × 15.5-16.5, 12 PR - -
    Rated Bucket Capacity 0.8 yd³ - -
    Breakout Force 6204 lbf - -
    Operating Weight 9462 lb - -
    Rated Operating Load at Full Turn - Bucket*** 2502 lb - -
    Straight Tipping Load - Bucket*** 5975 lb - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5004 lb - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5115 lb - -
    Rack Back - Transport Position 51° - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3148 lb - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2361 lb - -
    Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - -
    Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - -
    Note (3) ***Manual quick coupler, precleaner hood. - -
    Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - -

    Maximum Material Densities - General Purpose
    Bucket Type General Purpose - -
    Rated Capacity 0.8 yd³ - -
    Dump Height 90 in - -
    Maximum Material Density 3169 lb/yd³ - -
    Bucket Width 70 in - -
    Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - -

    Maximum Material Densities - Light Material
    Bucket Type Light Material - -
    Rated Capacity 1.3 yd³ - -
    Dump Height 85 in - -
    Maximum Material Density 1989 lb/yd³ - -
    Bucket Width 74 in - -
    Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - -

    Sustainability
    Recyclability 97% 96% -

    Operating Specifications
    Operating Weight - 116858 lb -
    Rated Payload - Quarry Face - 12.5 ton (US) -
    Bucket Capacity Range - 6.4-7.6 m3 (8.3-10 yd3) -
    Cat Truck Match - High Lift - 772/773/775 -
    Breakout Force - - 51008 lb
    Note (1) - - For a machine configuration as defined under �Weight.�
    Note (2) - - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
    Static Tipping Load - Full 40° Turn - No Tire Deflection - - 20965 kg
    Static Tipping Load - Full 40° Turn - With Tire Deflection - - 43432 lb

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - EH - Load Sense -
    Lift/Tilt System - 2X x 145 cc Variable displacement piston -
    Maximum Flow at 2,165 rpm - 159 gal/min -
    Relief Valve Setting - Lift/Tilt - 4598 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 190 mm x 1216 mm (7.5 in x 48 in) -
    Cylinders, Double Acting - Tilt, Bore and Stroke - 170 mm x 722 mm (6.7 in x 28.4 in) -
    Pilot System - Variable displacement piston -
    Tilt Cylinder - Stroke - 27 in -

    Hydraulic Cycle Times
    Rack Back - 3.8 s -
    Raise - 7.5 s -
    Dump - 3 s -
    Lower Float Down - 4.6 s -
    Total Hydraulic Cycle Time - Empty Bucket - 18.9 s -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing -
    Steering System - Pump - Piston, variable displacement -
    Maximum Flow - 52 gal (US) -
    Relief Valve Setting - Steering - 4000 psi -
    Total Steering Angle - 70° -
    Steering Cycle Times - High Idle - 3 s -
    Steering Cycle Times - Low Idle - 5.2 s -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

    Axles
    Front - Fixed -
    Rear - Trunnion -
    Oscillation Angle - +/-12.5° -

    Brakes
    Brakes - ISO 3450:2011 -

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. -

    Bucket Capacities
    Bucket Range - - 4.0-14.5 m³ 5.25-19 yd³

    Sound
    Note (1) - - ** For machines in European Union countries and in countries that adopt the �EU Directives.�
    Note (2) - - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.�
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - - 109
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - - 112 dB(A)
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - - 78
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - - 72 dB(A)

    Dimensions
    Note - - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - - 8.9 ft
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 1.5 ft
    Height - Top of Exhaust Pipe - - 12.5 ft
    Height - Top of Hood - - 10.1 ft
    Height - Top of ROPS - - 12.7 ft
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 15.7 ft
    Lift Arm Clearance at Maximum Lift - - 13.6 ft
    Overall Length - Without Bucket - - 27.5 ft
    Tread Width - - 8 ft
    Wheel Base - - 12.6 ft
    Rack Back at Ground - - 40 degrees
    Width over Tires (Loaded) - - 10.9 ft
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch - - 6.3 ft
    Ground Clearance - - 456 mm
    Height - Top of Exhaust Pipe - - 3764 mm
    Height - Top of Hood - - 3064 mm
    Height - Top of ROPS - - 3829 mm
    Hinge Pin Height at Carry - - 2.2 ft
    Hinge Pin Height at Maximum Lift - - 4554 mm
    Lift Arm Clearance at Maximum Lift - - 3881 mm
    Overall Length - Without Bucket - - 8155 mm
    Tread Width - - 8 ft
    Wheel Base - - 3800 mm
    Rack Back at Ground - - 40 degrees
    Centerline of Rear Axle to Edge of Counterweight - - 2661 mm
    Width over Tires (Loaded) - - 10.9 ft
    Rack Back - Carry Height - - 50 degrees
    Rack Back - Maximum Lift - - 61 degrees
    Add a Similar Product: