CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    903D Compact Wheel Loader
    View Product
    992 Wheel Loader
    View Product Remove
    995 Wheel Loader
    View Product Remove

    Engine
    Maximum Gross Power 42 HP - -
    Engine Model Cat C2.4* Cat® C32B Cat® 3516E
    Gross Power 42 HP - -
    Net Power - 2,200 rpm - SAE J1349 R-ing 40 HP - -
    Net Power - 2,200 rpm - ISO 9249 R-ing 40 HP - -
    Bore 3.4 in 5.7 in 6.7 in
    Stroke 4 in 6.4 in 8.5 in
    Displacement 147 in² 1963.5 in³ 4766 in³
    Note *Engine meets U.S. EPA Tier 4 Final emission standards. - -
    Net Power - 814 HP -
    Emissions - U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
    Rated Speed - 1750 rpm -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard - 900 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient - 937 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard - 907 HP -
    Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient - 944 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard - 884 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient - 921 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard - 893 HP -
    Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient - 931 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient - 814 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard - 823 HP -
    Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient - 823 HP -
    Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm - 3514 ft·lbf -
    Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm - 3555 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm - 3537 ft·lbf -
    Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm - 3570 ft·lbf -
    Engine Power - ISO 14396 - - 1847 HP
    Gross Power - SAE J1995 - - 1870 HP
    Net Power - SAE J1349 - Standard Ambient - - 1739 HP
    Net Power - SAE J1349 - High Ambient - - 1696 HP
    Peak Torque - 1,200 rpm - SAE J1995 - - 8549 lb/ft
    Torque Rise - - 39%
    Note (1) - - The power ratings apply when tested under the reference conditions for the specified standard.
    Note (2) - - The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
    Note (3) - - The gross power advertised is with the fan at maximum speed.

    Weights
    Operating Weight 9414 lb - -

    Buckets
    Bucket Capacities 0.6-1.0 m3 (0.8-1.3 yd3) 11.5-24.5 m³ (15-32 yd³) -
    Bucket Capacities - General Purpose 0.6 m3 (0.8 yd3) - -
    Bucket Capacities - Light Material 1.0 m3 (1.3 yd3) - -

    Transmission
    Travel Speed 12.4 mile/h - -
    Transmission Type - Cat Planetary Powershift Cat Planetary Power Shift
    Forward - 1 - 4.3 mile/h 4.6 mile/h
    Forward - 2 - 7.4 mile/h 8 mile/h
    Forward - 3 - 12.7 mile/h 13.6 mile/h
    Direct Drive - Forward 1 - Disabled Lock-up disables
    Direct Drive - Forward 2 - 8 mile/h 8.7 mile/h
    Direct Drive - Forward 3 - 14 mile/h 15.2 mile/h
    Reverse - 1 - 4.7 mile/h 5 mile/h
    Reverse - 2 - 8.1 mile/h 8.8 mile/h
    Reverse - 3 - 13.9 mile/h 14.9 mile/h
    Direct Drive - Reverse 1 - 5 mile/h Lock-up disables
    Direct Drive - Reverse 2 - 8.8 mile/h 9.6 mile/h
    Direct Drive - Reverse 3 - 15.3 mile/h 16.8 mile/h
    Note - - Travel speeds based on 58/85-57 tires.

    Hydraulic System
    Main Relief 3481 psi - -
    3rd Auxiliary Flow 14 gal/min - -
    Hydraulic Cycle Time - Lower, Float 2.4 s - -

    Loader Hydraulic System
    Hydraulic Cycle Time - Lift 4.4 s - -
    Hydraulic Cycle Time - Dump 0.7 s - -

    Cab
    ROPS ISO 3471:2008 - -
    FOPS ISO 3449:2005 Level I - -

    Service Refill Capacities
    Cooling System 3 gal (US) - -
    Fuel Tank 11.4 gal (US) 385.7 gal (US) -
    Hydraulic System 6.3 gal (US) - -
    Engine Oil 2.4 gal (US) - -
    Cooling Systems - 59.4 gal (US) -
    Crankcase - 31.7 gal (US) -
    Transmission - 51.5 gal (US) -
    Differential - Final Drives - Front - 96.4 gal (US) -
    Differential - Final Drives - Rear - 96.4 gal (US) -
    Hydraulic System Factory Fill (Implement) - 104.1 gal (US) -
    Hydraulic Tank - Implement - 60.2 gal (US) -
    Hydraulic Factory Fill (Steering) - 32.5 gal (US) -
    Hydraulic Tank (Steering Tank Only) - 26.3 gal (US) -

    Dimensions (Approximate) - Standard Lift
    Cab Height 8.25 ft - -
    Ground Clearance 10 in - -
    Wheel Base 6.42 ft - -
    Overall Length - With Bucket* 15.75 ft - -
    Reach at Maximum Dump Height* 2.33 ft - -
    Dig Depth 6 in - -
    Maximum Dump Height* 7.5 ft - -
    Load Over Height 9.17 ft - -
    Hinge Pin at Maximum Height 10.08 ft - -
    Departure Angle - Degrees 30° - -
    Overall Length - With Forks 17.08 ft - -
    Reach - Ground Level 2.67 ft - -
    Maximum Reach 4.5 ft - -
    Fork Depth Above Ground 2 in - -
    Fork Height at Maximum Reach 4.67 ft - -
    Maximum Fork Height 9.83 ft - -
    Fork Reach at Maximum Height 2 ft - -
    Turning Radius - Over Bucket* 13.17 ft - -
    Turning Radius - Inside Tire** 5.92 ft - -
    Width - Over Bucket* 5.83 ft - -
    Tire Gauge 4.33 ft - -
    Machine Width** 5.58 ft - -
    Articulation Angle 40° - -
    Steering Angle 80° - -
    Dump Angle at Maximum Height 40° - -
    Note (1) *Vary with bucket size. - -
    Note (2) **Vary with tire size. - -
    Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - -

    Dimensions (Approximate) - High Lift
    Cab Height 8.25 ft - -
    Ground Clearance 10 in - -
    Wheel Base 6.42 ft - -
    Overall Length - With Bucket* 16.17 ft - -
    Reach at Maximum Dump Height* 2.42 ft - -
    Dig Depth 8 in - -
    Maximum Dump Height* 8 ft - -
    Load Over Height 9.67 ft - -
    Hinge Pin at Maximum Height 10.58 ft - -
    Departure Angle - Degrees 30° - -
    Overall Length - With Forks 17.58 ft - -
    Reach - Ground Level 3.25 ft - -
    Maximum Reach 4.92 ft - -
    Fork Depth Above Ground 2 in - -
    Fork Height at Maximum Reach 4.67 ft - -
    Maximum Fork Height 10.33 ft - -
    Fork Reach at Maximum Height 2 ft - -
    Turning Radius - Over Bucket* 13.42 ft - -
    Turning Radius - Inside Tire** 5.92 ft - -
    Width - Over Bucket* 5.83 ft - -
    Tire Gauge 4.33 ft - -
    Machine Width** 5.58 ft - -
    Articulation Angle 40° - -
    Steering Angle 80° - -
    Dump Angle at Maximum Height 40° - -
    Note (1) *Vary with bucket size. - -
    Note (2) **Vary with tire size. - -
    Note (3) Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner. - -

    Operating Specifications - Standard Lift
    Tire Size 33 × 15.5-16.5, 12 PR - -
    Rated Bucket Capacity 0.8 yd³ - -
    Breakout Force 6160 lbf - -
    Operating Weight 9414 lb - -
    Rated Operating Load at Full Turn - Bucket*** 2701 lb - -
    Straight Tipping Load - Bucket*** 6415 lb - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5401 lb - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5512 lb - -
    Rack Back - Transport Position 51° - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3366 lb - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2524 lb - -
    Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - -
    Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - -
    Note (3) ***Manual quick coupler, precleaner hood. - -
    Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - -

    Operating Specifications - High Lift
    Tire Size 33 × 15.5-16.5, 12 PR - -
    Rated Bucket Capacity 0.8 yd³ - -
    Breakout Force 6204 lbf - -
    Operating Weight 9462 lb - -
    Rated Operating Load at Full Turn - Bucket*** 2502 lb - -
    Straight Tipping Load - Bucket*** 5975 lb - -
    Full Turn Static Tipping Load - Bucket (ISO 14397-1*)*** 5004 lb - -
    Full Turn Static Tipping Load - Bucket (Rigid Tire**)*** 5115 lb - -
    Rack Back - Transport Position 51° - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)*** 3148 lb - -
    Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)*** 2361 lb - -
    Note (1) *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing. - -
    Note (2) **Compliance to ISO 14397-1 (2007) Sections 1 thru 5. - -
    Note (3) ***Manual quick coupler, precleaner hood. - -
    Note (4) Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted. - -

    Maximum Material Densities - General Purpose
    Bucket Type General Purpose - -
    Rated Capacity 0.8 yd³ - -
    Dump Height 90 in - -
    Maximum Material Density 3169 lb/yd³ - -
    Bucket Width 70 in - -
    Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - -

    Maximum Material Densities - Light Material
    Bucket Type Light Material - -
    Rated Capacity 1.3 yd³ - -
    Dump Height 85 in - -
    Maximum Material Density 1989 lb/yd³ - -
    Bucket Width 74 in - -
    Note Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage. - -

    Sustainability
    Recyclability 97% - -

    Operating Specifications
    Operating Weight - 233430 lb -
    Rated Payload - Standard - 25.5 ton (US) -
    Rated Payload - Standard (Material Handler) - 30 ton (US) -
    Rated Payload - High Lift - 22.5 ton (US) -
    Rated Payload - High Lift (Material Handler) - 27 ton (US) -
    Bucket Capacity Range - 11.5-24.5 m³ (15-32 yd³) 17.2-43.6 m3 (22.3-57 yd3)
    Cat Truck Match - Standard - 775/777 785/789
    Cat Truck Match - High Lift - 785 789/793/794
    Operating Weight - Standard - - 543772 lb
    Operating Weight - High Lift - - 547675 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) - - 60 ton (US)
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Rated Payload - High Lift (Low to Moderate Digging Resistance) - - 55 ton (US)
    Rated Payload - High Lift (Moderate to High Digging Resistance) - - 50 ton (US)
    Note - - *Please contact your local dealer to determine if your application is suitable for this increased rated payload.

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Positive Flow Control Positive Flow Control
    Lift/Tilt System - Pump - Variable Displacement Piston Variable Displacement Piston
    Maximum Flow at 2,165 rpm - 250 gal/min -
    Relief Valve Setting - Lift/Tilt - 5000 psi 5004 psi
    Lift Cylinder - Bore - 9.3 in -
    Lift Cylinder - Stroke - 63.5 in -
    Tilt Cylinder - Bore - 11.5 in -
    Tilt Cylinder - Stroke - 41.5 in -
    Maximum Flow at 1,700 rpm Engine Speed - - 541 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 370 × 1713 mm (14.6 × 67.4 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke - - 310 × 1086 mm (12.2 × 42.8 in)
    Pilot System - - Open Loop and Pressure Reducing

    Hydraulic Cycle Times
    Rack Back - 2.3 s 4.9 s
    Rack Back - High Lift - 2.3 s -
    Raise - 9 s 12.6 s
    Raise - High Lift - 9 s -
    Dump - 2.6 s 3.1 s
    Dump - High Lift - 2.6 s -
    Float Down - 3.2 s -
    Float Down - High Lift - 3.2 s -
    Total Hydraulic Cycle Time - 17.1 s -
    Lower Float Down - - 4.2 s

    Axles
    Front - Fixed Fixed
    Rear - Trunnion Trunnion
    Oscillation Angle - ±9° 9°

    Brakes
    Brakes - ISO 3450:2011 ISO 3450:2011

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, Load Sensing Pilot, Load Sensing
    Steering System - Pump - Piston, Variable Displacement Piston, Variable Displacement
    Maximum Flow at 1,400-1,850 rpm - 70 gal/min -
    Steering Cut Off Pressure - 4500 psi -
    Total Steering Angle - 80° 80 degrees
    Steering Cycle Times - Low Idle - 4.9 s 7.6 s
    Steering Cycle Times - High Idle - 3.1 s 4.3 s

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard - 109.4 °F 109.4 °F
    Ambient Capability, Hydraulically Driven Demand Fan - High - 131 °F -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) - - 131 °F
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) - - 127.4 °F

    Sound Performance - Standard
    Note - Machine Sound Level (ISO 6396:2008) - 116 dB(A) The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 74 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 119 dB(A)

    Sound Performance - Suppression
    Note - Machine Sound Level (ISO 6396:2008) - 113 dB(A) The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent - - 73 dB(A)
    Machine Sound Level (ISO 6395:2008) - - 117 dB(A)

    Dimensions - Standard Lift - Approximate
    Ground to Top of Exhaust Stacks - 17 ft 23.2 ft
    Ground to Top of ROPS - 18.3 ft 23.4 ft
    Ground to Top of Hood - 13.1 ft 18.6 ft
    Ground to Center of Front Axle - 4.3 ft -
    Ground to Bumper Clearance - 3.8 ft 4.4 ft
    Ground to Lower Hitch Clearance - 2.2 ft 2.9 ft
    Reach - Maximum Lift - 8.2 ft 9.6 ft
    Clearance at Maximum Lift - 15.2 ft 19.8 ft
    B-Pin Height - Maximum Lift - 22.8 ft 28.8 ft
    Maximum Overall Height - Bucket Raised - 30.8 ft 39.3 ft
    Rear Axle - Centerline to Bumper - 13.5 ft 20.4 ft
    Tread Width - 10.83 ft 14.1 ft
    Rack Back Angle - Maximum Lift - 56.9 degrees -
    Dump Angle at Maximum Lift - -49.5 degrees –50.0 degrees
    Rack Back Angle - Ground Level - 40.2 degrees 39.7 degrees
    Width - Over Tires - With Bulge - 14.74 ft 18.8 ft
    Rack Back Angle - Carry - 48.9 degrees 47.7 degrees
    Wheel Base - 19.3 ft 22.3 ft
    Maximum Overall Length - 50.8 ft 64.6 ft
    Front Axle Centerline to Bucket Tip - 18 ft 21.9 ft
    Ground to Center of Axles - - 6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.5 degrees

    Dimensions - High Lift - Approximate
    Tread Width - 10.83 ft 14.1 ft
    Rack Back Angle - Ground Level - 42.5 degrees 45 degrees
    Dump Angle at Maximum Lift - -48.1 degrees –50.0 degrees
    Rack Back Angle - Maximum Lift - 56.2 degrees -
    Width - Over Tires - With Bulge - 14.75 ft 18.8 ft
    Rack Back Angle - Carry - 51.6 degrees 53.5 degrees
    Ground to Top of Exhaust Stacks - 17 ft 23.2 ft
    Ground to Top of ROPS - 18.3 ft 23.4 ft
    Ground to Top of Hood - 13.1 ft 18.6 ft
    Ground to Center of Front Axle - 4.3 ft -
    Ground to Bumper Clearance - 3.8 ft 4.4 ft
    Ground to Lower Hitch Clearance - 2.2 ft 2.9 ft
    Reach - Maximum Lift - 7.6 ft 9.4 ft
    Clearance at Maximum Lift - 17.2 ft 22.6 ft
    B-Pin Height - Maximum Lift - 24.5 ft 31.6 ft
    Maximum Overall Height - Bucket Raised - 32 ft 42.1 ft
    Rear Axle - Centerline to Bumper - 13.5 ft 20.4 ft
    Wheel Base - 19.3 ft 22.3 ft
    Maximum Overall Length - 51.6 ft 66.9 ft
    Front Axle Centerline to Bucket Tip - 18.8 ft 24.2 ft
    Ground to Center of Axles - - 6 ft
    Note - - Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
    Rack Angle at Maximum Lift - - 59.4 degrees

    Complete System Fill
    Fuel Tank - Standard - - 856 gal (US)
    Fuel Tank - With 24 hr Attachment - - 1414 gal (US)
    Cooling System - - 138 gal (US)
    Engine Crankcase - - 76 gal (US)
    Transmission - - 110 gal (US)
    Differential - Final Drives - Front - - 220 gal (US)
    Differential - Final Drives - Rear - - 200 gal (US)
    Hydraulic Tank - Implement and Hydraulic Fan - - 270 gal (US)
    Hydraulic Tank - Steering and Braking - - 100 gal (US)
    Oil Renewal System (ORS)* - - 20 gal (US)
    Note - - *Not available on Tier 4 Final/Stage V machines. Not available in all regions.
    Add a Similar Product: